All Things ANSYS 041: Simulating Additive Manufacturing in ANSYS 2019 R2

 

Published on: July 15th, 2019
With: Eric Miller & Doug Oatis
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Lead Mechanical Engineer Doug Oatis, to discuss the tools that make up the ANSYS Additive family of products (Additive Suite, Additive Print, & Additive Prep), and how those tools help to make 3D printing more effective and easier to navigate.

If you would like to learn more about what’s available in this latest release check out PADT’s webinar on Additive Manufacturing Updates Updates in ANSYS 2019 R2 here: https://bit.ly/2JHWYxn

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Simulation for Additive Manufacturing In ANSYS 2019 R2 – Webinar

Additive manufacturing (3D Printing) has been rapidly gaining popularity as a true manufacturing process in recent years. ANSYS’ best-in-class solution for additive manufacturing enables simulation at every step in your AM process, and helps to optimize material configurations, and machine & parts setup before printing begins. 

Through the use of ANSYS tools such as Additive Suite & Additive Print, paired with topology optimization capabilities in ANSYS Mechanical Workbench, the need for physical process of trial-and-error testing has been greatly reduced. 

Join PADT’s Simulation Support and Application Engineer Doug Oatis for an exploration of the ANSYS tools that help to optimize additive manufacturing, and what new capabilities are available within them when upgrading to ANSYS 2019 R2. This presentation includes updates regarding:

  • Archiving materials no longer in use
  • Visualization of AM process
  • AM overhang angles
  • Preview part & support
  • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 040: Live From the 2019 ASME Turbo Expo – CFD Applications for Turbomachinery

 

Published on: July 1st, 2019
With: Eric Miller, Robin Steed of ANSYS, & Chris Robinson of PCA Engineers Limited
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by ANSYS CFX & Turbo Tools Lead Technical Product Manager Robin Steed, and Managing Director at PCA Engineers Limited, Chris Robinson, live at the 2019 ASME Turbo Expo in Phoenix Arizona, for a discussion on the past, present, and future of ANSYS CFD and its use in the realm of turbomachinery. Both Robin and Chris have multiple years of experience working in this industry, and their expertise provided some fascinating insight into what this tool is all about.

If you would like to learn more about what’s available in the latest CFD update check out PADT’s webinar on Fluids Updates in ANSYS 2019 R2 here: https://bit.ly/2J6l5We

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 039: Updates for Design Engineers in ANSYS 2019 R2

 

Published on: June 17th, 2019
With: Eric Miller, Ted Harris, & Tom Chadwick
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Manager Ted Harris, and Senior CFD Engineer Tom Chadwick for a discussion on what new capabilities (beta or otherwise) are available for design engineers in the latest updates made to Discovery Live in ANSYS 2019 R2.

If you would like to learn more about this update and see the tool in action, along with others in the 3D Design family of products (Discovery AIM, SpaceClaim & Live) check out PADT’s webinar on the topic here: https://bit.ly/2KfO0tK

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Fluids Updates in ANSYS 2019 R2 – Webinar

ANSYS CFD goes beyond qualitative results to deliver accurate quantitative predictions of fluid interactions and trade-offs. These insights reveal unexpected opportunities for your product — opportunities that even experienced engineering analysts can miss.

Products such as ANSYS Fluent, Polyflow, and CFX work together in a constantly improving tool kit that is developed to provide ease of use improvements for engineers simulating fluid flows and it’s impacts on physical models.

Join PADT’s Simulation Support and Application Engineer, Sina Ghods, for a look at what is new and improved for fluids-related tools in ANSYS 2019 R2. This presentation includes updates regarding:

A new fluent experience

Parallel Mosaic-enabled meshing

Discrete Phase Modeling

Creating high-quality meshes for complex models

Transient elasticity for fluid structure interaction

And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

3D Design Updates in ANSYS 2019 R2 – Webinar

When it comes to the exploration of rapid 3D design, simulation provides a more efficient and optimized workflow for design engineers looking to streamline product development and improve product performance. The toolkit of flagship ANSYS 3D design products made up of Discovery SpaceClaim, Discovery Live, and Discovery AIM allow users to build, and optimize lighter and smarter products with an interface easier to use than most other simulation products. 

Users can delve deeper into the details of a design with the same accuracy as other, more robust ANSYS tools, all while refining their concept and introducing multiple physics simulations to better account for real-world conditions.

Join PADT’s Simulation Support Manager Ted Harris, for a look at what’s new for this line of products with the release of ANSYS 2019 R2. Explore updates for these three tools including:

  • Shared Topology
  • Meshing
  • Navigation
  • Modal Supports 
  • Multi-physics Coupling
  • Topology Optimization 
  • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Bring Your Most Imaginative Ideas to Life with Pantone Validation on the Stratasys J750 & J735

If seeing is believing, holding something this vivid is knowing for sure.

The Stratasys J735 and J750 deliver unrivaled aesthetics to your brightest ideas and boldest ambitions with true, full-color capability, texture mapping and color gradients.

3D print prototypes that look, feel and operate like the finished products in multiple materials and colors without sacrificing time for intricacy and complexity. Better communicate designs with vivid, realistic samples, and save on manual post-processing delays and costs.

Stratasys J735 and J750 printers are PANTONE Validated™

This validation makes the Pantone Matching System (PMS) Colors available for the first time in a 3D printing solution. It provides a universal language of color that enables color-critical decisions through every stage of the workflow for brands and manufacturers. It helps define, communicate and control color from inspiration to realization.

Color matching to Pantone Colors in a single click

GrabCAD Print software provides a quicker, more realistic expression of color in your models and prototypes, saving hours over traditional paint matching or iterative color matching processes.

  • Adding Pantone color selection increases the color gamut found within the GrabCAD Print Application and simplifies the color selection process
  • Designers can access the colors directly from GrabCAD Print, selecting Pantone within the Print Settings dialog box. From within this view the user can search for their desired Pantone color or select from the list.

Multiple material selections

This means  you can load up to six materials at once, including any combination of rigid, flexible, transparent or opaque materials and their components.

Double the number of print nozzles

More print heads means you can produce ultra-smooth surfaces and fine details with layer thickness as fine as 0.014 mm—about half the width of a human skin cell.

Discover how you can achieve stronger realism and color matching thanks to the Pantone Validation available on the Stratasys J750 & J735.

Contact the industry experts at PADT via the link below for more information:

All Things ANSYS 038 – Simulating Multibody Dynamics More Accurately with ANSYS Motion

 

Published on: June 3rd, 2019
With: Eric Miller & Jim Peters
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Staff Technologist, Jim Peters for a discussion on the benefits of using ANSYS Motion to enable fast and accurate analysis of rigid and flexible bodies, and give accurate evaluation of physical events through the analysis of the mechanical system as a whole. ANSYS Motion uses four tightly integrated solving schemes: rigid body, flexible body, modal and mesh-free EasyFlex. This gives the user unparalleled capabilities to analyze systems and mechanisms in any desired combination.

If you would like to learn more about this update and see the tools in action, check out PADT’s webinar covering ANSYS Motion here: https://bit.ly/2MsRATh

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Meshing Updates in ANSYS 2019 R2 – Webinar

An intelligent, high-quality mesh is at the core of any effective simulation based model; creating the basis for what will help to drive valuable results for even the most complex engineering problems.

Among a variety of tools in ANSYS 2019 R2 are enhanced meshing capabilities that can help reduce pre-processing time and provide a more streamlined solution.

Join PADT’s Specialist Mechanical Engineer, Joe Woodward for a look at what new meshing capabilities are available in the latest release of ANSYS. This presentation will focus predominately on updates regarding:

ANSYS Mechanical Meshing
Batch Connections
Axisymmetric Sweep
Layered Tetrahedron Enhancements
Local Sizing Enhancements
SpaceClaim Meshing
Parameter Management
Direct Modeling/Meshing
Hex Meshing
Block Decomposition

And much more!

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).


You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 037 – Optimizing the Industrial Internet of Things with ANSYS Digital Twins

 

Published on: May 20th, 2019
With: Eric Miller & Matt Sutton
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Analyst and Lead Software Developer, Matt Sutton for a discussion on the industrial internet of things, and how ANSYS Digital twins helps companies make confident predictions about future product performance, reduce the cost and risk of unplanned downtime, and improve future product development processes.

If you would like to learn more about this update and see the tools in action, check out PADT’s webinar covering ANSYS Twin Builder here: http://alturl.com/ccjjq

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Optimize Product Performance with ANSYS Digital Twins – Webinar

Engineering simulation has traditionally been used for new product design and virtual testing, eliminating the need to build multiple prototypes prior to product launch.

Now, with the emergence of the Industrial Internet of Things (IIoT), simulation is expanding into operations. The IIoT enables engineers to communicate with sensors and actuators on an operating product to capture data and monitor operating parameters. The result is a digital twin of the physical product or process that can be used to monitor real-time prescriptive analytics and test predictive maintenance to optimize asset performance.

Join PADT’s Senior Analyst & Lead Software Developer Matt Sutton for an in depth look at how digital twins created using ANSYS simulation tools optimize the operation of devices or systems, save money by reducing unplanned downtime and enable engineers to test solutions virtually before doing physical repairs.

This webinar will include an overview of technical capabilities, packaging for licensing, and updates made with the release of ANSYS 2019 R1.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Introducing the Stratasys V650 Flex – Stereolithography Upgraded

The result of over four years of testing, the Stratasys V650 Flex delivers high quality outputs unfailingly, time after time. More than 75,000 hours of collective run time have gone into the V650 Flex; producing more than 150,000 parts in its refinement.

Upgrade to the Stratasys V650 Flex 3D Stereolithography printer and you can add game-changing advances in speed, accuracy and reliability to the established capabilities of Stereolithography. Create smooth-surfaced prototypes, master patterns, large concept models and investment casting patterns more quickly and more precisely than ever.  

In partnership with DSM, Stratasys have configured, pre-qualified and fine-tuned a four-strong range of resins specifically to maximize the productivity, reliability and efficiency of the V650 Flex 3D printer. Create success with thermoplastic elastomers, polyethylene, polypropylene and ABS:

Next-generation stereolithography resins, ideal for investment casting patterns.

Stereolithography accuracy with the look, feel and performance of thermoplastic.

For applications needing strong, stiff, high-heat-resistant composites. Great detail resolution

A clear solution delivering ABS and PBT-like properties for stereolithography.

Thanks to reduced downtime and increased workflow, the Stratasys V650 Flex prints through short power outages, and if you ever need to re-start, you can pick up exactly where you left off. Years of testing have helped deliver not only the stamina to run and run, but also low maintenance needs and high efficiency. To make life even easier, the V650 Flex runs on 110V power, with no need to switch to a 220V power source.

For ease of use, every V650 Flex comes with a user-friendly, touch-enabled interface developed in parallel with SolidView build preparation software. This software contains smart power controls and an Adaptive Power Mode for automated adjustment of laser power, beam size and scan speeds for optimum build performance. 

The V650 Flex also comes equipped with adjustable beam spot sizes from 0.005” to 0.015” that enhance control, detail, smoothness and accuracy. With more precise printing comes better informed decision-making and better chances of success. You have twice the capacity and, to ease workflow further, this production-based machine provides a large VAT for maximum output (build volume 20”W x 20”D x 23”H) and interchangeable VATs.

Through partnering with Stratasys and Stereolithography now comes with an invaluable component: peace of mind. The V650 Flex is backed by the end-to-end and on-demand service and world-class support that is guaranteed with Stratasys. Any field issues get fixed fast, and their 30 years’ experience in 3D printing enable us to help you do more than ever, more efficiently.

Discover how you can work with advanced efficiency thanks to the all new Stratasys V650 Flex.

Contact the industry experts at PADT via the link below for more information:

All Things ANSYS 036 – Updates for Design Engineers in ANSYS 2019 R1 – Discovery Live, AIM, & SpaceClaim

 

Published on: May 6th, 2019
With: Eric Miller, Ted Harris, & Clinton Smith
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Manager Ted Harris, and CFD Team Lead Engineer Clinton Smith for a round-table discussion regarding new capabilities for Design Engineers in the latest release of the ANSYS Discovery family of products (Live, AIM, & SpaceClaim). Listen as they express their thoughts on exciting new capabilities, long anticipated technical improvements, and speculate at what has yet to come for this disruptive set of tools.

If you would like to learn more about this update and see the tools in action, check out PADT’s webinar covering ANSYS Discovery AIM & Live in 2019 R1 here: shorturl.at/gyKLM

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Discovery Updates in ANSYS 2019 R1 – Webinar

The ANSYS 3D Design family of products enables CAD modeling and simulation for all design engineers. Since the demands on today’s design engineer to build optimized, lighter and smarter products are greater than ever, using the appropriate design tools is more important than ever.

Two key tools helping design engineers meet such demands are ANSYS Discovery AIM and ANSYS Discovery Live. ANSYS Discovery AIM seamlessly integrates design and simulation for all engineers, helping them to explore ideas and concepts in greater depth, while Discovery Live operates as an environment providing instantaneous simulation, tightly coupled with direct geometry modeling, to enable interactive design exploration.

Both tools help to accelerate product development and bring innovations to market faster and more affordably.

Join PADT’s Simulation Support Manager, Ted Harris for a look at what exciting new features are available for design engineers in both Discovery Live and AIM, in ANSYS 2019 R1. This webinar will include discussions on updates regarding: 

  • Suppression of loads, constraints, & contacts
  • Topology Optimization
  • Improving simulation speed
  • Transferring data from AIM to Discovery Live

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 035 – The History of ANSYS: An Interview with Dr. John Swanson, author of the original program & founder of ANSYS Inc.

 

Published on: April 22nd, 2019
With: Eric Miller, Ted Harris, & Dr. John Swanson
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Ted Harris for a very special interview for users of ANSYS software, Dr. John Swanson. Dr. Swanson is known as the founder of “Swanson’s Analysis Systems” in 1970; the company that would later be known to the public as ANSYS Inc. He also wrote the original ANSYS program in his home, and since leaving the company has gone on the work in philanthropy and alternative energy.

A John Fritz Medal winner, and member of the National Academy of Engineering, John is considered an authority and pioneer in the application of Finite Element methods to engineering.

We are incredibly thankful that John was able to join us for this interview, and we hope you enjoy learning a little bit about the history of ANSYS from the founder himself.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS