All Things ANSYS 046: The Founding of CFX

 

Published on: September 9th, 2019
With: Eric Miller, Paul Galpin, & Brad Hutchinson
Description:  

In this episode, your host and Co-Founder of PADT, Eric Miller is joined by Paul Galpin and Brad Hutchinson, two founders of the Computational Fluid Dynamics (CFD) simulation tool now owned by ANSYS, called CFX. They discuss how they initially got into the world of simulation, the current state of CFD, and what is important to be aware of as it continues to grow and develop.

If you would like to learn more about what’s new in the latest version of CFX, check out PADT’s webinar on fluids updates in ANSYS 2019 R3 here: https://www.brighttalk.com/webcast/15747/369903

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 045: Using Simulation to Disrupt the RF Antenna Industry

 

Published on: August 26th, 2019
With: Eric Miller & Stefan O’Dougherty
Description:  

In this episode, your host and Co-Founder of PADT, Eric Miller is joined by Stefan O’Dougherty of FreeFall Moving Data to discuss the use of ANSYS simulation tools to drive the design of their unique RF antenna concept.

To learn more about FreeFall and see their product in action, click the link below and view the Wired article discussed in the interview portion of today’s episode: https://www.wired.com/story/new-space-telescopes-could-look-like-giant-beach-balls/

If you would like to learn more about what’s available in the latest release of ANSYS HFSS check out PADT’s webinar on the subject here: https://www.brighttalk.com/webcast/15747/361278

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 044: Optimize Materials Knowledge & Applications with ANSYS Granta pt. 2

 

Published on: August 14th, 2019
With: Eric Miller, Anthony Dawson, & David Cebon
Description:  

In this episode, the continuation of our discussion on ANSYS Granta, your host and Co-Founder of PADT, Eric Miller is joined by Anthony Dawson, Senior Director of Materials Business Unit Product Operations at ANSYS, and David Cebon, Chief Technologist at ANSYS Granta, as they dive deeper and discuss the history of the company, and the specific tools that make up the Granta family of products.

If you would like to learn more about what’s available in this latest release check out PADT’s webinar on ANSYS Granta here: https://bit.ly/3001IFA

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 043: Optimize Materials Knowledge & Applications with ANSYS Granta pt. 1

 

Published on: August 12th, 2019
With: Eric Miller, Ward Rand, & John Perek
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Ward Rand, one of PADT’s other Co-Founders, and John Perek, Principal Materials Engineer at Honeywell Aerospace to discuss the introduction of Granta to the ANSYS product line, its benefits for materials selection & analysis, and thoughts the Honeywell team has had since implementing it into their workflow.

If you would like to learn more about what’s available in this latest release check out PADT’s webinar on ANSYS Granta here: https://bit.ly/3001IFA

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 042: Mechanical Updates in ANSYS 2019 R2

 

Published on: July 30th, 2019
With: Eric Miller, Ted Harris, & Joe Woodward
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Manager & Specialist Mechanical Engineer Joe Woodward to discuss the latest additions and improvements made for structural analysis in ANSYS Mechanical 2019 R2.

If you would like to learn more about what’s available in this latest release check out PADT’s webinar on Mechanical Updates Updates in ANSYS 2019 R2 here: https://bit.ly/2OuGmyP

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 041: Simulating Additive Manufacturing in ANSYS 2019 R2

 

Published on: July 15th, 2019
With: Eric Miller & Doug Oatis
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Lead Mechanical Engineer Doug Oatis, to discuss the tools that make up the ANSYS Additive family of products (Additive Suite, Additive Print, & Additive Prep), and how those tools help to make 3D printing more effective and easier to navigate.

If you would like to learn more about what’s available in this latest release check out PADT’s webinar on Additive Manufacturing Updates Updates in ANSYS 2019 R2 here: https://bit.ly/2JHWYxn

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 040: Live From the 2019 ASME Turbo Expo – CFD Applications for Turbomachinery

 

Published on: July 1st, 2019
With: Eric Miller, Robin Steed of ANSYS, & Chris Robinson of PCA Engineers Limited
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by ANSYS CFX & Turbo Tools Lead Technical Product Manager Robin Steed, and Managing Director at PCA Engineers Limited, Chris Robinson, live at the 2019 ASME Turbo Expo in Phoenix Arizona, for a discussion on the past, present, and future of ANSYS CFD and its use in the realm of turbomachinery. Both Robin and Chris have multiple years of experience working in this industry, and their expertise provided some fascinating insight into what this tool is all about.

If you would like to learn more about what’s available in the latest CFD update check out PADT’s webinar on Fluids Updates in ANSYS 2019 R2 here: https://bit.ly/2J6l5We

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 039: Updates for Design Engineers in ANSYS 2019 R2

 

Published on: June 17th, 2019
With: Eric Miller, Ted Harris, & Tom Chadwick
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Manager Ted Harris, and Senior CFD Engineer Tom Chadwick for a discussion on what new capabilities (beta or otherwise) are available for design engineers in the latest updates made to Discovery Live in ANSYS 2019 R2.

If you would like to learn more about this update and see the tool in action, along with others in the 3D Design family of products (Discovery AIM, SpaceClaim & Live) check out PADT’s webinar on the topic here: https://bit.ly/2KfO0tK

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 038 – Simulating Multibody Dynamics More Accurately with ANSYS Motion

 

Published on: June 3rd, 2019
With: Eric Miller & Jim Peters
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Staff Technologist, Jim Peters for a discussion on the benefits of using ANSYS Motion to enable fast and accurate analysis of rigid and flexible bodies, and give accurate evaluation of physical events through the analysis of the mechanical system as a whole. ANSYS Motion uses four tightly integrated solving schemes: rigid body, flexible body, modal and mesh-free EasyFlex. This gives the user unparalleled capabilities to analyze systems and mechanisms in any desired combination.

If you would like to learn more about this update and see the tools in action, check out PADT’s webinar covering ANSYS Motion here: https://bit.ly/2MsRATh

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 037 – Optimizing the Industrial Internet of Things with ANSYS Digital Twins

 

Published on: May 20th, 2019
With: Eric Miller & Matt Sutton
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Analyst and Lead Software Developer, Matt Sutton for a discussion on the industrial internet of things, and how ANSYS Digital twins helps companies make confident predictions about future product performance, reduce the cost and risk of unplanned downtime, and improve future product development processes.

If you would like to learn more about this update and see the tools in action, check out PADT’s webinar covering ANSYS Twin Builder here: http://alturl.com/ccjjq

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 036 – Updates for Design Engineers in ANSYS 2019 R1 – Discovery Live, AIM, & SpaceClaim

 

Published on: May 6th, 2019
With: Eric Miller, Ted Harris, & Clinton Smith
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Manager Ted Harris, and CFD Team Lead Engineer Clinton Smith for a round-table discussion regarding new capabilities for Design Engineers in the latest release of the ANSYS Discovery family of products (Live, AIM, & SpaceClaim). Listen as they express their thoughts on exciting new capabilities, long anticipated technical improvements, and speculate at what has yet to come for this disruptive set of tools.

If you would like to learn more about this update and see the tools in action, check out PADT’s webinar covering ANSYS Discovery AIM & Live in 2019 R1 here: shorturl.at/gyKLM

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 035 – The History of ANSYS: An Interview with Dr. John Swanson, author of the original program & founder of ANSYS Inc.

 

Published on: April 22nd, 2019
With: Eric Miller, Ted Harris, & Dr. John Swanson
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Ted Harris for a very special interview for users of ANSYS software, Dr. John Swanson. Dr. Swanson is known as the founder of “Swanson’s Analysis Systems” in 1970; the company that would later be known to the public as ANSYS Inc. He also wrote the original ANSYS program in his home, and since leaving the company has gone on the work in philanthropy and alternative energy.

A John Fritz Medal winner, and member of the National Academy of Engineering, John is considered an authority and pioneer in the application of Finite Element methods to engineering.

We are incredibly thankful that John was able to join us for this interview, and we hope you enjoy learning a little bit about the history of ANSYS from the founder himself.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 034 – Celebrating 25 Years of ANSYS Simulation: Changes In The Last Quarter Century & Where The Future Will Take Us

 

Published on: April 8th, 2019
With: Eric Miller, Ted Harris, Tom Chadwick, Sina Ghods, & Alex Grishin
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Ted Harris, Tom Chadwick, Sina Ghods, and Alex Grishin, for a round-table discussion on their experience and history with simulation, including what has changed since they started using it and what they’re most impressed and excited by, followed by some prediction and discussion on what the future may hold for the world of numerical simulation.

Thank you again for those of you who have made the past 25 years something to remember, and to those of you who have come to know PADT more recently, we look forward to what the next 25 will bring.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 033 – Using ANSYS Simulation to Disrupt the World of Capacitor Technology

 

Published on: March 25th, 2019
With: Eric Miller & Sean Katsarelis
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Sean Katsarelis form Polycharge for a discussion on how they leverage the ANSYS Startup Program and simulation tools to disrupt the world of capacitor technology.

Listen as they discuss the various capabilities and applications best suited for this market, along with updates on the worlds of PADT and ANSYS.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 032 – What’s New in ANSYS Mechanical: Updates Made in 2019 R1

 

Published on: March 11th, 2019
With: Eric Miller & Ted Harris
Description:  

PADT’s Simulation Support Manager, Ted Harris for a discussion on what updates have been made available in the 2019 R1 version on ANSYS Mechanical. Listen as they discuss the various capabilities and applications for this new release, along with what makes these updates so significant.

Want to learn more about what to expect in ANSYS Mechanical 2019 R1? Check out PADT’s webinar covering everything you need to know about the tool’s latest update.

Watch here: https://bit.ly/2SSntmd

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS