Getting to Know PADT: Support Cleaning Apparatus (SCA) Manufacturing and Support

This is the third installment in our review of all the different products and services PADT offers our customers. As we add more, they will be available here.  As always, if you have any questions don’t hesitate to reach out to info@padtinc.com or give us a call at 1-800-293-PADT.

PADT Products SCA

PADT is in the business of helping people who make products.  So most people think of us as a provider of tools and services.  What they do not know is that PADT actually has a few of its own products.  The most successful of these is our line of Support Cleaning Apparatus systems, abbreviated as SCA.  These devices are used to remove soluble support material from parts 3D printed in Stratasys Fused Deposition Modeling Systems. They are robust machines manufactured and serviced by PADT, but sold through the Stratasys worldwide sales channel. As of July of 2017, over 10,800 units have been delivered to Stratasys.

Optimized Performance for Hands-Off Part Cleaning

The Stratasys 3D Printing systems that use Fused Deposition Modeling extrude plastic through a heated nozzle to build parts one layer at a time.  There are actually two nozzles. One puts down the building material and the other a support material that is dissolved in warm water that is slightly base.  The best way to remove that support material is to put it into a warm bath where the part is gently tumbled so that the water can works its way evenly into the part.  Stratasys tried several solutions for a companion washing system and eventually came to PADT and asked if we would try our hand at building a robust and efficient system.

sca product family

The result was the SCA-1200.  Launched at the end of 2008 it met the design requirements for reliability, part cleaning time, and noise.  Over 7,000 of these systems were shipped and saw heavy usage. In fact, if you have a Stratasys FDM system there is a good chance you have an SCA-1200.  It contained a unique shower head design that was optimized with simulation, and a modular assembly that could be repaired easily in the field.

SCA 3600 front 300w 1 Based upon the success and lessons learned from the SCA-1200, we released the SCA-1200HT in 2014.  With the same basic form factor, this design replaced the off-the-shelf magnetically coupled pump with a simpler and more reliable custom design from PADT. The new unit also had a more pleasing visual design, several usability enhancements, and a greater temperature range. It has sold over 3,000 units and continues to be a popular system.  The latest release includes a no-temperature setting that allows it to be used to clean Stratasys Polyjet parts.

The success of both system lead to a request to look at building a larger machine that could clean more parts at one time as well as larger parts.  The SCA 3600 has three times the volume but shares many internal parts with the SCA-1200HT.  Both of the new systems are doing well in the field with even better reliability and faster part cleaning times. They are also simpler to debug and repair.

The SCA systems are sold as stand alone devices or are bundled with key Stratasys FDM machines.  You can learn more about them on our SCA page:  www.padtinc.com/sca or you can contact whoever you buy your Stratasys equipment from.

Here is a video for the SCA-1200HT that talks all about what it does:

https://youtu.be/5bJPiJGHbZo

Practicing what We Preach

sca 3600 intank 300w 1 One of the most rewarding aspects of designing and manufacturing the SCA family of products was that it forced us to practice what we preach. We talk to companies every day about using simulation, 3D Printing, design for manufacturing, proper product development processes, and many more things needed to get a product right.  With the SCA we were the customer. We had to Walk the Walk or stop talking the talk.

 

It has been a phenomenal experience that has made us even better at helping our customers produce their new products. We used CFD to optimize the gentle agitation design and shower head and worked closely with our vendors to minimize the cost of manufacturing.  The worst part was that when the schedule slipped, we couldn’t blame the customer (only slightly joking).  One of the best set of lessons came from doing the repair and refurbishment of systems that failed. Even though the failure rate was low, we learned a lot and were able to make improvements to future designs. Now when we sit across from a customer and talk about the design, test, and manufacture of their product, we can really say that we understand where they are coming from.

 

 

 

 

 

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/03/2024

Stratasys F3300: Game Changing Throughput - Webinar

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/22/2024

Experience Stratasys Truck Tour: Houston, TX

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

04/24/2024

Experience Stratasys Truck Tour: Houston, TX

05/07/2024

Experience Stratasys Truck Tour: Albuquerque, NM

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/09/2024

Experience Stratasys Truck Tour: Los Alamos, NM

05/14/2024

Simulation World 2024

05/15/2024

Simulation World 2024

05/16/2024

Simulation World 2024

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: