On the Road for Three Different Shows, Three Different States

It’s been a busy couple of weeks for PADT, jetting around the four-corner region for technical conferences.  Three in fact.

The first was the 2013 Society for Mining, Metallurgy & Exploration Annual Meeting & Exhibit in Denver, Colorado.   We were focusing on simulation for this event, with Flownex and ANSYS. We were not however, focusing our camera phone, this is the best picture we got:

PADT-SME-Mining-Denver-2013Next was an event near and dear to our heart, the 2nd Annual Aerospace & Defense Requirements Conference put on by the Arizona Technology Council and the Arizona Commerce Authority. Since so many of our employees grew up in the Arizona Aerospace community, it was great to see old co-workers and a large number of our customers at the event, held at the Scottsdale Hilton. At this event we were able to highlight how all of PADT’s services and products can benefit our Aerospace and Defense customers.

PADT-AZ-A_and_D-2013

And just this week, our team in Utah was at the  Wasatch Front Materials Expo (WFME) for the local Society for the Advancement of Material and Process Engineering (SAMPE) conference at the University of Utah in Salt Lake City.  This was a great opportunity to show of the use of FDM and PolyJet 3D Printing technology from Stratasys for prototyping and tooling.

PADT-at-WFME-2013

Look for a PADT booth at these upcoming Events:

05/02/2013:    2013 ANSYS Convergence Conference – Irvine CA

05/30/2013:  2013 ANSYS Convergence Conference – Santa Clara CA

06/03/2013 – 06/07/2013:  ASME Turbo Expo 2013

06/12/2013 – 06/13/2013: 2013 ANSYS Convergence Conference – Houston TX

07/15/2013 – 07/16/2013:  ACTEAZ 2013 ACTE Summer Conference

We hope to see you there!