Other Stuff Every User Should Know about Tables in ANSYS Mechanical APDL: Nesting and 4 or 5 Dimension Tables

About a month ago we published an article on “What Every User Should Know About Tables in ANSYS Mechanical APDL”  At the end of that article we had a section on “Other Stuff”  and expressed our hope to cover those subjects in the future. The future is now.  If you are not very familiar with […]

Get to Know VCollab, and Geomagic Training

PADT is proud to announce that it has added the VCollab 3D Visual Collaboration Software for CAE (http://www.vcollab.com) to its software product offerings. PADT will offer VCollab along with VCollab’s facilitating CAX file format to deliver on the growing need for smaller simulation result files and increased efficiency in data transfer to its customers in […]

Composite Sketching, ANSYS Style: Copying a Sketch from One DesignModeler Session to Another

Recently a customer approached me and told me that he had a sketch in one DesignModeler database that needed to be copied over to another DesignModeler database and asked me if it would be possible to do so. My initial reaction was, “No way, dude be trippin’,” because that’s how I talk in professional settings. […]

ANSYS 14.0 Service Pack Summary

You may have noticed there are several official service packs available for ANSYS 14.0. In case it’s not clear to you what each of these service packs is for, here is a brief explanation to hopefully allow you to determine which of them you may need for your particular application of ANSYS products. ANSYS140.0.1: Service […]

Running an APDL Command Snippet for Every Load Step in ANSYS Mechanical

This week went by very fast, and I never got time to do the more advanced article on tables to follow up on last week’s article.  So I was going to give up till someone stopped by my office to ask a question and I thought my simple and clever answer would make a nice […]

What Every User Should Know About Tables in ANSYS Mechanical APDL

I was having a discussion with a user who is very experienced with a FEA tool other than ANSYS. He wanted to define some properties with respect to time and his rotational speed and wanted to know how hard it would be to write a custom routine in ANSYS to do that.  I immediately explained […]

An Ocean in the Desert: What is AQWA?

Maybe you’ve seen AQWA show up in the list of ANSYS products to be installed on your computer, or maybe you’ve seen it as a topic in the ANSYS Help System and you otherwise wondered about it.  Is it related to Aqua Man or perhaps Aqua Lung?  Not at all.  If you are not familiar […]

Node Interaction in Mechanical, Part 4: Scoping Results to Nodes

This article is the eagerly awaited fourth and final installment in my series on interacting with nodes in ANSYS Mechanical. To review, the previous three articles covered picking your nodes, creating named selections from nodes, and applying boundary conditions to nodes.  I know some of you were wondering why it took a while for this […]

Solution Information: Monitoring your Solves in ANSYS Mechanical

There is a folder with a big fat exclamation point on the top of the Solutions branch in ANSYS Mechanical. It is called “Solution Information.”  Most users click on it after their run is done and maybe look at the output from the ANSYS Mechanical APDL solve.  And it is very handy to check your […]

Surface Projection Based Contact Detection

The ANSYS Mechanical APDL solver has a lot of contact options.  KEYOPT(12) this and KEYOPT(4) that.  I’m sure we all read Chapter 3.9 of the Contact Technology Guide to understand and remind ourselves on all these options.  I know here at PADT we always do so on the third Tuesday of every month… OK, maybe […]

Node Interaction in Mechanical, Part 3: Nodal Boundary Conditions

This article is Part three in a four-part series about taking advantage of the new nodal interaction capabilities in Workbench 14.0. In Part 1 I discussed how to pick nodes and retrieve information about them. In Part 2 I covered various methods of creating nodal Named Selections. In this installment I’ll address the procedures for […]

Node Interaction in Mechanical, Part 2: Nodal Named Selections

This is the second entry in a thrilling saga about interacting with nodes in ANSYS Mechanical. In Part 1, I addressed the various methods for picking and querying nodes in a Mechanical model. In this entry, I discuss various methods for creating nodal Named Selections. Creating nodal Named Selections is a key step in executing […]

Webinar Files: Moisture Diffusion Modeling with ANSYS at R14 and Beyond

On May 24, 2012 Matt Sutton gave a well attended webinar on the new moisture diffusion modeling capabilities in ANSYS Mechanical APDL at R14. Although we didn’t get a successful recording for this one (Matt has been chastised and done his penance for forgetting to turn on the recording…) we do have a PDF of […]