Getting to Know PADT: ANSYS Sales and Support

This post is the eighth installment in our review of all the different products and services PADT offers our customers. As we add more, they will be available here.  As always, if you have any questions don’t hesitate to reach out to info@padtinc.com or give us a call at 1-800-293-PADT. When we tell people that “We […]

Entrepreneur 360 Recognizes PADT as One of the Top Privately-Owned Businesses in America

Working and living in your own bubble it’s hard to recognize how others perceive your company from the outside.  That is why we were honored and humbled to learn that PADT had been chosen by Entrepreneur Magazine as one of the top 360 companies in the country.  Today we found out we are number 249 […]

Save, Save, Save! Setting up a Save after Solution in ANSYS Mechanical

NOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!! Is this the reaction you have when you come in on Monday morning, and realize that another Windows update has, once again, rebooted your PC before you had a chance to save the 30-hour run that should have finished over the weekend? There a Workbench setting that can help relieve some of that stress. […]

Christmas Right-Left Gift Exchange Story: Trouble in Elftown

For our Christmas parties at PADT we generally have over 40 employees so a traditional secret Santa gift exchange takes to long. At some point, we downloaded a right-left gift exchange story from the internet and it was a big hit. When we ran out of stories on the internet, we started writing our own, […]

All Things ANSYS 010 – What the future holds for ANSYS & simulation

  Published on: December 19, 2017 With: Ted Harris, Joe Woodward, Alex Grishin, Jim Peters, Tom Chadwick, Ahmed Fayed, Eric Miller Description: In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Alex Grishin, Jim Peters, Joe Woodword, Tom Chadwick, Ahmed Fayed, and Ted Harris, for a discussion on predictions […]

Phoenix Business Journal: Are we living in a computer, software, internet, or information revolution?

What do you think historians will call the economic age that we are part of right now? Specifically, what revolution are we smack dab in the middle of? I share my guesses in “Are we living in a computer, software, internet, or information revolution?”    A good thing the contemplate as we get ready for […]

Phoenix Business Journal: When did RISK become a four-letter word?

Risk is what used to set the American business world apart from everyone else. People would risk everything to come here and then take risk in the marketplace. That has changed, “When did RISK become a four-letter word?” asks the question and throws out some ideas about how we need to turn that around.

Transitioning to ANSYS

Before joining PADT last July, I have worked on FEA and CFD analyses but my exposure to ANSYS was limited and I was concerned about the transition. To my delight, the software was very easy to learn; most often than not intuitive and self-explanatory (e.g. mechanical wizard), the setup time was minimized after learning couple […]

2017 Highlights: A lot happened at PADT this year

As we jump into December everyone is starting to realize that 2017 is almost over. And what would the end of a year be without a look back at what happened? 2017 was a big year for PADT, with new offerings, fantastic events, and humbling recognition taking place throughout the year.  If anything, this was […]

Without Risk There Can Be No Progress

I’m sure most people don’t know the name George M. Low.  He was an early employee at NASA, serving as Chief of Manned Space Flight and later as a leader in NASA’a Apollo moon program in the late 1960’s.  In fact, he was named Manager of the Apollo Spacecraft Program after the deadly Apollo 1 […]

All Things ANSYS 009 – How to get your Models to run Faster & Modeling 3D Printing with ANSYS

  Published on: December 4, 2017 With: Ted Harris, Joe Woodward, Eric Miller Description: In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Mechanical Engineer Joe Woodward, and Simulation Support Manager Ted Harris for a look into recent announcements regarding simulating 3D Printing with ANSYS and 3DSIM as well as a […]

Getting to Know PADT: Cube Simulation Computers

This post is the seventh installment in our review of all the different products and services PADT offers our customers. As we add more, they will be available here.  As always, if you have any questions don’t hesitate to reach out to info@padtinc.com or give us a call at 1-800-293-PADT. “It is done running already? What […]

Estimating Structural Response to Random Vibration in ANSYS Mechanical: Reaction Forces

One of the key outputs from any random vibration analysis is determining the response of the object you are analyzing in terms of reaction forces.  In the presentation below. Alex Grishin shares the theory behind getting accurate forces and then how to do so in ANSYS Mechanical. As always, please contact PADT for your ANSYS […]

Phoenix Business Journal: Exploring Easy: Making things easy with empowerment in your business

Empowerment is one of those loaded buzzwords that hangs out with synergy and disruptive. When done right, empowerment can make running a business, and making that business successful, much easier. In the fourth installment of “Exploring Easy” I take a look at empowerment and why is not just a good idea, it is easier to do than trying to […]

Phoenix Business Journal: Is your business ready for a one-star rating?

The ability to rate products, services, and even companies online has been fantastic for consumers. But it is also a tool that a disgruntled customer can use to seek revenge, and that is not fantastic for the company getting a bad rating.  Managing your online ratings is as important as your search engine optimization.  “Is […]