Ready to go for Turbo Expo 2013 in San Antonio

Categories: ,

booth2 The PADT and Flownex teams have our booth set up and ready to go for the next three days at Turbo Expo 2013.

This is always one of our favorite events because most of us came from this industry, and in fact all four of the founders were turbine-engine-engineers before we started PADT.  A special part of this years event is that we are introducing Flownex to the North American Turbo community as well as our CUBE HVPC computer systems.  So lots of new things to talk about along with our established offerings of ANSYS, Inc software consulting, customization, and training.

If you are there, please make sure you stop by our booth. We would love to see you and chat.

 

Here is our press release on the event:

p0

 

Trusted Partners for Turbomachinery Simulation

p1

The ASME Turbo Expo is the industry show where PADT feels at home the most.  Founded by experienced turbine engine simulation, design, and manufacturing engineers, the company has a true understanding of the real world needs of those who are focused on simulation for Turbomachinery.

Our primary focus for this year’s conference will be the full introduction of the Flownex Simulation Environment to North America.  This thermal-fluid system simulation tool started life as a solver for combustor analysis, and has grown up to be a full featured toolset that can model any fluid-thermal network in your engine or pump.  Flownex is ideal simulation software for the quick thermo-fluid analysis of gas turbine performance.

p2
It provides aircraft engine design and system engineers with the ability to simulate complicated air and gas flow patterns through fans, compressors and turbines; match compressor and turbine power and compile maps; calculate thrust, shaft power, combustion calculations with convection, conduction and radiation heat transfer; and determine fuel consumption.  If you are using an in-house tool or software written for other applications to model your flow networks, please come by to see how Flownex can reduce the amount of time you spend modeling your systems while increasing the fidelity of your models.s grown up to be a full featured toolset that can model any fluid-thermal network in your engine or pump.  Flownex is ideal simulation software for the quick thermo-fluid analysis of gas turbine performance.

p3

PADT’s reputation in the Turbomachinery industry is built on our expertise selling, using, supporting, and customizing the complete suite of ANSYS FEA and CFD.  Turbo companies come to us for training on ANSYS software, customization of analysis tools, FEA and CFD outsourcing, and HPC hardware because they know we know their business and how to maximize the return on their investment in simulation.  We can help anyone doing simulation on Turbomachinery in a variety of ways, stop on by to find out how.

p4

Another new area the PADT provides this type of help to turbo companies is by offering a complete line of High Value Performance Computer systems specifically designed for the simulation user.  From workstations to large clusters, PADT can custom design a system that hits the sweet spot between cost and performance, delivering faster turnaround of CFD and FEA runs for considerably less than systems offered by general purpose computer suppliers.

Stop by our booth to look at the hardware, software, training, and consulting that we offer to companies around the world to help them make their studies more efficient and effective.

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

03/28/2024

SAF Blue Carpet Event

03/28/2024

2024 Arizona Space Summit

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/03/2024

Stratasys F3300: Game Changing Throughput - Webinar

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/22/2024

Experience Stratasys Truck Tour: Houston, TX

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

04/24/2024

Experience Stratasys Truck Tour: Houston, TX

05/07/2024

Experience Stratasys Truck Tour: Albuquerque, NM

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/09/2024

Experience Stratasys Truck Tour: Los Alamos, NM

05/14/2024

Simulation World 2024

05/15/2024

Simulation World 2024

05/16/2024

Simulation World 2024

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: