One of the fun things I get to do is design and print cool things to share what you can do with 3D Printing. This has extended to making awards for organizations that PADT supports like the Arizona Technology Council, The Arizona SciTech Festival, and AZBio. Recently our favorite incubator asked us to design a custom award for their first Impact and Innovation Celebration. The request was to incorporate the CEI logo:
Taking a 2D image and making it 3D can be a lot of fun, and in this case it showcased some cool things you can do with 3D CAD and then 3D Printing. There were some special steps needed to get this one done so I thought I’d share them.
The basic concept was to take the initials, CEI, and create a block that can serve as base. Then extrude the orange line-circle geometry as the key visual object. But the thing that sets the logo apart from most, is the use of the succulent plant, an agave I think, in the logo. So we definitely need a 3D agave on there. The last element needed was the actual award part, where the name and award being given could be listed.
To get started I needed to get the logo into the CAD system I use, SolidEdge. Usually I convert a PDF into DXF in Adobe Illustrator. I then imported this into sketch planes. But in this case I only had a bitmap (PNG) Fortunately you can paste that into a sketch plan as well, then just draw on top of it. So I made three planes: Front facing and one rotated 45 deg and another -45 about the Z axis. I then pasted the logo on to each of these centering the bottom center of the E on the global axis. This allows me to extrude and cut on each plan while keeping everything aligned
The base was made by extruding the initials from the +45/-56 planes and doing a Boolean intersect, This gives the letters from two views while creating a “3D-ness” That stands out. The circle-line was then extruded on the front plane to cover the block created by the intersection. It needed a “foundation” as well as a way to hold the letters together, so I just made a simple base.
That left the agave. I thought about modeling it but nah… too much work. So I went online and found a bunch of plants that people have made for video games and rendering. Cool except the format was not STL, what we need for 3D Printing. So I downloaded some crazy rendering format. Then I used a free online tool (thank you google, sorry I didn’t write down the one I used) that converts between 3D graphics files. That took it to STL where I could read it into Meshlab, the open source tool for playing with this type of data. As usually with models made for graphics ,there was a lot of extra data and coordinate systems didn’t really translate right. No problem, Meshlab makes it easy to select and delete objects. I also scaled it from gigantic to the size I needed for the award. Next step was to save that as STL and import that into SolidEdge so I could view it and position it properly on the award.
Last was the award part itself. I played with a couple of ideas and just came up with a simple plaque that we could 3D print words on. i made it white and the “holder” blue to stand out. Then printed the award name and winner in bright colors using the text extrusion feature in SolidEdge. When I need to get fancy, I’ll do the words and often a logo in Illustrator, export as DXF, then import as a sketch for extrusion. But in this case a nice simple Bold Arial font worked great.
So it was done, and I have to say looked pretty good. So I asked our experts on 3D Printing if they had any suggestions. Their one comment was “this is really cool, but its going to be expensive to print as one part.” Duh, I should have paid more attention in my own seminar on design for 3D Printing. I had tall thin objects and bulky objects and they were all combined. Lots of unneeded supports and flat surfaces at non-vertical or horizontal angles in the printer. Bad stuff.
The solution was to design the parts so they could be printed separately and easily assembled. The resulted in an STL for the base, for the circle-line, the frame, the agave, and the award plaque with simple features that would allow us to quickly glue it all together. We also decided to print the base on FDM because it needed to be white and used the bulk of the material, and therefore cost. The rest was printed on a Stratasys Polyjet printer in color.
One more change worth noting was how to connect the crazy shapes of the agave needed some simple interface to the circle-line part. So I created a simple cylinder that intersected the base of the agave. In the printer we were able to combine the STL of the cylinder and the agave with two different colors. A cylindrical cut in the orange part made assembly easy.
The results came out pretty nice, and the winners seemed to really like them.
The great thing about 3D Printing is the restraints it removes on making things. You still have to plan it out to align with what the printers do well, but that doesn’t take a lot of effort and the results are great
I was honored to be asked to join Santari Minor and George Grombacher for episode 31 of their podcast: Figure it Out. It was wide ranging and fun conversation that flowed across so many different and interesting topics, it was hard to stop. We covered 3D printing, automation, artificial intelligence and the future of work. Made me think. Take a listen and maybe it will make you think.
You can listen at most podcast services, here are two locations:
Performance so good, you won’t believe it’s so easy to use!
The Stratasys F123 3D Printer Series demands less knowledge and experience, while meeting even the most advanced rapid prototyping expectations and needs, helping to make it the perfect machine for the classroom. This Series excels at all stages of the design prototyping process, from draft-concept iterations – to complex design verification – to high-quality functional prototypes.
Enhanced 3D printing capabilities of the F123 series include:
New user interface
Remote print monitoring
Improved software experience with GrabCAD Print
Easy material change out
Auto material changeover
Join PADT’s Application Engineer James Barker and Sales Executive Jeff Nichols for a webinar that will provide an in depth look at all three machines that make up the all new F123 3D Printer Series (F170, F270, & F370).
When Nathan Huber moved to Arizona from Colorado to join PADT he learned a lot, and one of the things he learned fast was that the inside of cars get very hot in the summer here. In fact, the shift knob on his car was untouchable in July. This coincided with his learning more about metal 3D Printing and an idea occurred, what about 3D Printing a metal shift knob designed to cool off faster, and that looked cool. Oh, and use ANSYS to drive the design.
We are very pleased to announce the launch meeting of the newest New Mexico Technology Council peer group: 3D Printing. After the success of other peer groups, and a similar committee in the Arizona Technology Council, PADT is partnering with the NMTC to start a group focused on all things Additive Manufacturing, which is the more technical name for 3D Printing. Schools, businesses, and individuals who have any involvement or interest in this exciting and transformative technology will be able to network and organize to get greater value from 3D Printing. This includes understanding the technology, working together on research projects, and getting to know what services are available locally. It will also serve as a platform to coordinate the use of 3D printing in STEM education.
For this launch event, PADT’s Rey Chu will share his thoughts on the latest and most interesting advancements in 3D Printing.
NMTC 3D Printing Peer Group Launch
Rio Bravo Brewing Company, 1912 2nd St NW, Albuquerque, NM 87102
June 22, 2017
5:00 pm – 7:00 pm
Anyone (21 years of age or older) involved in Academia, Industry, or Research that is involved or interested in Additive Manufacturing
To build cooperation between the growing 3D Printing community in the state
Being social, creating connections, and joining the group to take action in the future
We will kick off the meeting with introductions around the room, then listen to Rey share his views on what is new and interesting in this industry, then talk about the peer group, answer questions, and start planning our next activities. At around 6:45 or so we will commence with the networking.
Please contact PADT at email@example.com if you have any questions before the event. We hope to see you there.
Don’t forget to register, and please let anyone else you think might be interested know about the event.
The most important discussions around installing and operating a metal 3D printer involve safety. The requirements can be difficult to pin down since they depend on several things: whether you are using reactive or non-reactive alloys (read a previous post on this subject here), the risk perception of your local building safety director and fire marshal, local regulations (and exceptions) and the volume of material you are dealing with. As with all things safety and more so because of how nascent metal 3D printing technology is, I list a few disclaimers at the bottom of this page.
There is so much to say about safety in this process that half-way through writing this post, it became clear it would not fit in one post. Therefore, I have split the content into two: in this post (3A) I talk about the risks: where they come from and why they matter. In the next post (3B), I will discuss how these risks can be mitigated.
1. Sources of Risk
Broadly speaking, I like to think of two sources of risk in this process since as an operator of these machines you have to think differently about how you interact with these sources.
1.1 Metal Powder
Metal 3D printing involves fusing together powder in a bed. Typical metal powders used for laser based 3D printing are spherical in shape and range from 10-70 microns in diameter, as shown in Figure 1. At this size, a metal can be prone to fire and explosion (under the right circumstances) and there is also the physiological concern of long-term inhalation of, and contact with, these powders. The powder also has a long life cycle and requires human interaction at many steps – from arriving in a container (as shown in Figure 2), through multiple recycling steps through final disposal. These risks come into play just when handling the powder (independent of its use in the process) – an additional risk comes from the melting process itself.
1.2 The Laser Fusion Process
The powder in the bed described before is fused together into a solid using a laser that locally melts the powder one layer at a time. This is conducted in an inert atmosphere (Argon or Nitrogen) and is the second source of risk since these gases can displace Oxygen from a closed environment. Additionally, the process of laser melting of metals creates vaporized soot (see video below), some of which deposits on the process chamber and in the extraction module and filter. The smoke particles can be even finer than the powder itself, and need to be cleaned out with care on a regular basis.
There are 4 main risks arising from the laser powder bed fusion process: fire and explosion, powder inhalation and contact, inert gas asphyxiation and the environmental impact of the wastes generated.
2.1 Fire and Explosion
In May 2014, OSHA cited a 3D printing company for 10 violations deriving from the workplace safety standards surrounding the operation of a metal 3D printer (including not having the proper Class D fire extinguisher). The disregard of multiple safety measures during a routine build setup procedure resulted in a fire which caused life-threatening burns to the operator of the printer. While this incident was the result of gross negligence, it is nonetheless a cautionary tale that should drive us to understand the fundamental reasons why a metal 3D printer can cause fires and to appreciate the underlying reasons for why suppliers recommend the safety measures they do.
Fire and explosion require a combination of conditions as shown in the commonly cited image below used by OSHA and other agencies to communicate risks of powder handling.
As shown in Fig. 3, when handling powder in ambient atmospheres (with oxygen), all that is needed is a suitable ignition source to initiate a fire. Further, if this occurs in the presence of a dust cloud with many particles dispersed in a contained area (such as a small room or an air duct), this could lead to a more damaging explosion.
Fire: When handling metal powder, the user needs to be aware that she/he already has 2 of the 3 requirements of a fire met and the main aim must be to ensure protection against any ignition source. There are several sources that could cause an ignition, the most likely one for a user of a metal 3D printer is static electricity. Additionally, it is possible that a fire can be initiated by hot surfaces, flames, hot gases and particles, mechanically generated sparks and strayelectrical currents.
Explosion: With regard to explosions, in addition to the 3 requirements above, dust clouds in contained areas can exacerbate any ignition to a much larger impact within milliseconds. Therefore, the prevention of the formation of metal dust clouds (as unlikely as that may seem), is of paramount importance.
In addition to the requirements above, there are levels associated with each requirement that need to be met together for an actual fire or explosion to occur. The risk of ignition increases with reducing particle diameter and given a certain particle size, the most significant factor governing risk is the nature of the metal. Reactive metals (Aluminum alloys, Titanium and its alloys, as well as smoke particles from both reactives and non-reactives) pose much higher risk than non-reactive metals (steels, Inconels, bronze, Cobalt Chrome alloys) – this is a subject I wrote about in more detail in a previous post.
2.2 Powder Inhalation & Contact
As discussed before, most metal 3D powder particles range in size from 10-70um. This is at the very edge of what is considered respirable and damaging to our lungs. While contact physically is to be avoided since it may initiate irritation and potential dermatitis, there is greater concern about the long-term inhalation exposure risks of these powders. Particles of the size range in this process can get deposited in the tracheo-bronchial region per Jenson  and Goldich . Ultimately, these particles are discharged from the body or swallowed, but effects of long term exposure for the wide range of metals and alloys is not fully studied – which is why suppliers insist on respirators (more on that in the next post). It is worth pointing out though, from the work published by Jenson and Goldich, that it appears that while metal 3D printing powders are small enough to travel past the nasal cavity if inhaled, their sizes are large enough that respiratory damage in the lungs is highly unlikely – only particles under 2 microns are at risk of making it all the way to the alveoli and causing lung disease .
2.3 Inert Gas Asphyxiation
Inert gases are used in laser metal 3D printers to reduce the reactivity of the metal for processing purposes. Most metal 3D printers either use Nitrogen or Argon. Inert gas asphyxiation is the main risk due to oxygen being displaced by either of these gases that have leaked for some reason. Since both gases are not detectable by humans, victims do not realize that they are inhaling air depleted of oxygen and as a result this can have a serious impact. The human body is used to atmospheric percentages of oxygen (21%) and values below 19.5% can be harmful and are defined as oxygen-deficient per OSHA . Thus, any user of nitrogen or argon gas (and this applies not just to any process using inert gases), especially in small spaces such as a closed room, needs to be aware of this risk and protect against it.
2.4 Environmental Impact
A key challenge with powder based processes lies in collecting and disposing the stray or “fugitive” powder from different locations such as the tool, PPE, containers and vacuum systems into temporary storage, during which the above risks of fire/explosion and inhalation remain. Additionally, the storage typically results in loose powder and solid waste as well as water with powder particles, both of which need to be disposed into the outside world and could pose an environmental hazard. I will discuss this further in a future post, when I attempt to look at some of the environmental aspects around this technology.
This is intended to supplement the supplier training you must receive before using the equipment and not meant to replace it – in case of conflicting information, your supplier’s training and equipment requirements override any discussion here. PADT assumes no legal responsibilities for any decisions or actions taken by the readers of this document.
My personal experience derives specifically from the use of Laser-based metal 3D printing tools, specifically Concept Laser’s MLab Cusing R equipment. I expect majority of this information to be of use to users of other laser based powder bed fusion metal systems and to a lesser extent to Electron Beam systems, but have no personal experience to vouch for this.
Local, state and federal regulations vary, and are important – partner with your local fire marshal (or equivalent authority) as a starting point and take them along with you every step of the way. If in the US, familiarize yourself in particular with OSHA’s guidance on dust explosions  and NFPA 484 , the National Fire Protection Association’s standard for combustible metals (links below).
Continue to Part 3B here, where I address mitigation strategies to address the risks described in this post. In the meantime, please read my prior posts below if you haven’t already, or send your inputs to me via message on LinkedIn. Thank you!
PADT is excited to introduce the newest polyjet material available from Stratasys, Agilus30! Agilus30 is a superior Rubber-like PolyJet photopolymer family ideal for advanced design verification and rapid prototyping.
Get more durable, tear-resistant prototypes that can stand up to repeated flexing and bending. With a Shore A value of 30 in clear or black, Agilus30 accurately simulates the look, feel and function of Rubber-like products. 3D print rubber surrounds, overmolds, soft-touch coatings, living hinges, jigs and fixtures, wearables, grips and seals with improved surface texture.
Agilus30 has applications in a number of areas, including:
Tooling needing rubber-like characteristics
Overmolding & many more!
Want to know more about PolyJet’s toughest flexible material to date?
Join PADT’s 3D Printing Application Engineer James Barker along with Stratasys Materials Business Manager Ken Burns for a presentation on the various benefits and attributes that Agilus30 has to offer, which machines are compatible with it, and how companies are making use of it’s unique capabilities.
The project to keep a 1944 P-51 Mustang flying was covered again, this time in 3D Metal Printing Magazine (Pg 23-33). Concept Laser worked with PADT to reverse engineer and print the exhaust manifold from a P-51 to keep it flying. Unlike the other article and video on the project, this reporter used this example as a great way to look at the readiness of military aircraft, and not just antique planes.
As PADT’s Rey Chu says ““This was a great exercise that’s suitable for numerous military applications and very relevant to the future use of 3D metal printing to maintain fleets in the field,” Chu says. “Maintaining spare-parts inventory has become a significant challenge, for example, to the Air Force. Additive manufacturing could be the solution.”
Mostly we make boxes. Pretty boxes but the bulk of what we 3D Print is some sort of plastic box that people stuff electronics in to. Most of the time we also don’t really know what customers do with the objects we make for them. But every once in a while you get involved in a project that really makes a difference. That could not be more true than two recent medical applications for 3D Printing that we worked on with Intermountain Healthcare (IHC) in Salt Lake City, Utah.
KSL, a local TV station, did a story on our IHC was deploying 3D Printing to produce better outcomes for their patients. You can view the story here.
PADT was fortunate enough to be part of two of the cases mentioned in the story. The first was a St George man who was feeling some pain in his back. He had a scan and they found 12 kidney stones. On top of that, his kidney was not in the right place and was distorted. PADT helped print a model of the scan so that the doctors could just get a real feel for what they were dealing with, and then plan the surgery.
The second situation really pulled at our heart strings. A 10 year old boy needs heart surgery and its a complicated problem. They need a model fast so we worked with Stratasy to quickly print an accurate model so tha the surgeons could come up with a plan. We still have not heard how it went, they are scheduling things, but the feedback from the team was that the 3D model was extremely helpful. We are talking life saving.
Both of these recent situations build on years of examples where we have worked the doctors and their technical assistance to convert scans of patients into usable 3D Models. If you are in the surgery or surgery planning space and want to learn more about how accurate 3D models printed directly from scan data can be used to improve patient outcome, contact PADT at firstname.lastname@example.org and we will connect you with our 3D Printing team.
Download all 5 parts of this series as a single PDF here.
This is part 2 of a 5-part series on the lessons we learned installing our first Metal 3D printer, a Concept Laser MLab Cusing R. Please read the first post if you haven’t already, where I listed all the different equipment (in addition to the 3D printer itself) one needs to run this process.
A reminder at the outset: these posts are meant to be informative only, to give you a sense of what questions you need to ask and get answers to. Specific requirements will vary by equipment and your site specific needs.
Most metal 3D printers, including the Concept Laser machines, are manufactured in Europe and have electrical requirements that differ from what most American machine shops are setup for (which is the scope of this section). If you have installed 230 V European equipment before and know what L-N and PE stand for and how they differ between European and American systems, you can skip this section. If not, read on.
There are two key items here one needs to be aware of: first of course is the fact that these pieces of equipment typically run on single-phase 230 V (3-phase 400V for the very large machines like Concept Laser’s XLine 2000R) as opposed to the standard 110V. Secondly, and this is easier to miss, European electrical connections have one “hot” line (L) for a single-phase, one Neutral line (N) and one Protected Earth (PE) – this is different from the US standard where you have 2 “hot” lines and 1 ground. The reason for these differences and how to address them electrically is beyond the scope of this post (or my understanding), but the main point is to have an electrician familiar with European codes review this early on. A dedicated custom transformer for all your European 230V equipment is one solution, and the one we employed here at PADT, as shown in Figure 1. (I rarely give shout-outs, but our experience with Fargo Electric on procuring a custom, affordable transformer was one of the best transactions I have ever had.)
2. Inert Gas
Laser melting of powder metals needs to be conducted in an inert atmosphere. Most suppliers recommend using Argon for Aluminum and Titanium alloys, but that Nitrogen is fine for the non-reactive alloys such as steel, Inconel and Cobalt-Chrome alloys. At PADT, we leveraged our existing nitrogen generator and added an additional line running to our metal 3D printer (Figure 2). Before doing this, you need to add up all the consumption rates for the machines (at their peaks) to make sure you don’t exceed the generator’s capabilities. It is a good idea to demarcate space for Argon cylinders should you need them at a later stage.
3. ESD Mats or Floors (for Reactive Metals)
As we will see in the next blog post in this series, avoiding charge dissipation into metal powder is a key safety requirement for operating metal 3D printers – this is achieved through a range of strategies like ESD (Electro Static Discharge) armbands, grounding ElgiloyHastelloy C4 wires etc. If you plan on running reactive metals and especially if you expect to have many operators, an ESD coated floor with ESD shoes or boot straps, along with an ESD meter (like the one Honeywell installed at their facility) is a good strategy. From personal experience with ESD boot straps, I know these can be fickle in passing an ESD meter test. Connecting the ESD meter to the entryway door so entry is only provided after passing the test is one way to ensure only those with functioning straps enter the workspace. For those without this strategy, grounded ESD mats and ESD armbands connected to the machine are also alternative strategies which I will discuss in more detail in the next post. From a facilities standpoint, if you do want to enable ESD coated floors, boot straps and ESD meters, you need to plan this early, which is why I have included it here.
Access to running water is essential for cleaning the wet separator (vacuum) that is used for sucking up fugitive powder – ideally the water source is near your liquid waste storage so you can clean out the wet separator and pour the powder-contaminated water into storage. Alternatively, you can also use a garden sprayer for smaller machines, like we do at PADT. Fill up the sprayer with water and use it to rinse out the wet separator right on top of the waste storage bin.
Another reason you need access to water is to passivate the filter. While not all OEMs recommend water passivation, Concept Laser does and we find it to be very user friendly, as I demonstrate in the video below (video starts 2:58 in, which is when I discuss filter passivation with water).
5. Access Control
It is important to restrict access to your metal AM laboratory through badge scanning or key pad entry to those who are trained on using the machine, and your building facilities team. It also helps to provide as much visibility through glass windows so that folks that are entering can study what activity is in progress before entering.
6. Structure & Ventilation
Here I move into the subjective (gray area) domain – I request anyone who has more specific information on these matters to kindly share them with me for inclusion in this post (with due credit). I have heard anecdotally that in some places the city has required the supplier to install blast walls and other explosion resistant infrastructure – yet others have not required such infrastructure (including ours). I am not well informed in this space and can only emphasize the need to have these discussions out in the open in the early stage of planning your facility and ask your city’s building safety person if the walls you have planned (or already have installed) are adequate or not – this is likely to be a function of the amount and reactivity of the powder you are handling, proximity to vulnerable areas, human occupancy and other concerns. With regard to ventilation, the more open the space the better (these machines can heat up a small, closed room) – at the same time the space needs to be sealed off from the elements including wind. I know this too is a subjective matter, so discussions with city representatives are the best way to go.
Fast, easy to use lightweighting for structural analysis is now only a few clicks away thanks to the introduction of Topology Optimization in ANSYS 18.
Engineers who use Finite Element Analysis (FEA) can reduce weight, materials, and cost without switching tools or environments. Along with this, Topology Optimization frees designers from constraints or preconceptions, helping to produce the best shape to fulfill their project’s requirements.
Topology Optimization also works hand-in-hand with Additive Manufacturing; a form of 3D printing where parts are designed, validated, and then produced by adding layers of material until the full piece is formed. Pairing the two simply allows users to carry out the trend of more efficient manufacturing through the entirety of their process.
Join PADT’s simulation support manager Ted Harris for a live presentation on the full
benefits of introducing Topology Optimization into your manufacturing process. This webinar will cover:
A brief introduction into the background of Topology Optimization and Additive Manufacturing, along with an overview of it’s capabilities
An explanation of the features available within this tool and a run through of it’s user interface and overall usage
An in-depth look at some of the intricacies involved with using the tool as well as the effectiveness of it’s design workflow
When I was asked to take part in a demonstration put on by one of our local communication companies, Cox Communications, showing off what a “smart home” looks like, I of course said yes. I love gadgets, and smart gadgets more. On top of that it was another chance to evangelise on the power of 3D Printing. And I got to hang out in a brand new luxury condo in Downtown Phoenix, a post kid lifestyle change that is very appealing. Plus we deal with customers designing and improving Internet of Things (IoT) devices all the time, and this is the perfect chance to see such products in action.
So I packed up one of our Makerbots, none of our Fortus machines fits in the back of my Prius, and headed downtown. The first thing that shocked me was that I had the printer, my iPhone, iPad, and laptop connected to their network in about one minute. The printer showed up on the Makerbot Print app on my iPad and I was printing a part in about three minutes.
The whole point of the demonstration was to show how the new high-speed Internet offering from Cox, Gigablast, can enable a true smart home. So I was focused on the speed of the connection to the Internet, which was fast. What I didn’t get till I connected was that the speed and bandwidth of the WiFi in the house was even more important.
When everything was connected, we had 55 devices on the local network talking to each other and the Internet. At one point I was downloading a large STL file to the printer while on a teleconference on my iPhone and my “roommate” was giving a violin lesson to one of his students in Canada.
Oh, and the roomba started to vacuum the floor. On the balcony someone was giving a golf lesson and a doctor was diagnosing a patient in the master bedroom. That was on top of the smart kitchen gadgets. And it all worked. Yes, it all worked.
I’m trying to convey shock and surprise because the reality is that nine times out of ten when I show up for some event, at a customer, or at a friends house and we try and connect things to the internet… it doesn’t work. If you are a technical guy you know that feeling when your vacation or visit for dinner turns into an IT house call. All I could think of was how awesome it was that everything worked and it was fast.
So I went to work printing little plastic Arizona style houses with COX on the roof. And then a reporter showed up. “3D Printing, interesting. Hmmmm… they are cool and all but really, what does that have to do with a smart house?” Damn reporters and their questions. I was still reveling in the fact that everything worked so well, I hadn’t taken to time to think about the “so what.”
Then I thought about it. 3D Printing in the home is just now starting to take off, and the reason why is actually high-speed internet connections. If you wanted a 3D Printer in your home in the past you needed the printer, a high end computer, and some good 3D modeling software on that computer. Basically you had to create whatever you wanted to make. Unless you are a trained engineer, that may not be so easy.
But with a well connected home you have access to places like Thingiverse and Grabcad to download stuff you want to print. And if you do want to create your own, you can go to Tinkercad or Onshape and use a free online 3D modeler to create your geometry. All over the web, even on a pad, phone (I don’t recommend trying to do modeling on a phone, but it does work), or on a basic computer. The files are stored in the cloud and downloaded directly to your printer. No muss, no fuss. All you need is a reliable and fast connection to the internet and in your home.
High speed internet and a smart 3D printer makes anyone a maker.
And when we had a three hour break, I went downstairs to a coffee shop on the ground floor of the condo and worked, while monitoring my builds using the camera in the smart 3D Printer.
Pretty cool when you step back and think about how far we have come from that first Stereolithography machine that PADT bought in 1994. We had to use floppy disks to get the data from our high-end Unix workstation to the machine. Now it sits on the web and can be monitored.
This may be what we have been waiting for when it comes to 3D Printers in the home moving beyond that technologists and makers.
I’ve been focused on my experience with the 3D printing in the smart home, but there was a lot more to look at. Check out these stories to learn more:
I also did a piece for the Phoenix Business Journal while I was at the event on “3 keys to success for smart home devices” based on what I learned while playing with the other devices in the smart home.
All and all a good day. Oh, and being a 10 minute walk from my favorite pub made the idea of living downtown not such a bad idea, which doesn’t have much to do with high speed internet, connected devices, or 3D Printing. But one of my goals was to check out post-child urban living…
Download all 5 parts of this series as a single PDF here.
What equipment does one need for metal 3D printing?
This is the first in a five-part series that brings together the different lessons we learned installing our first metal printer, a Concept Laser MLab Cusing R at PADT, shown in Figure 1. In this post I list the different equipment needed to enable metal 3D printing end-to-end, along with a brief explanation of its purpose. In subsequent posts, I deal with (2) Facilities, (3) Safety, (4) Environmental & (5) Housekeeping aspects of the technology. I hope this information adds to the conversation in a meaningful way and help those who are thinking about, or in the process of installing a metal 3D printer.
The specifics of some of this information will vary depending on the equipment and materials you handle, but my hope is the themes covered here give you a sense of what is involved in installing a metal 3D printer to aid in your preparation for doing the same and for having good discussions with your equipment supplier to ensure these are addressed at a minimum.
One way to look at classifying the equipment needed (beyond the obvious metal 3D printer!) is by its purpose, and I do so here by dividing it into two broad categories: Ancillary Equipment (necessary to the printing itself) and Post-Processing Equipment (focused on the part).
At the outset, it is crucial that the difference between reactive and non-reactive metal alloys be comprehended since a lot of the use of the equipment differs depending on what kind of metal alloy is being used. A previous blog post addressed these differences and these terms will be used in the following sections.
1. Ancillary Equipment
1.1 Wet Separator
The wet separator is essentially a vacuum cleaner that is designed to safely vacuum stray (“fugitive”) metal powders that cannot be cleaned up any other way. When dealing with powders, the typical recommendation is to first brush whatever you can into the overflow bin so you can reuse it. The next step is to try and wipe up powder with a moist lint-free cloth (to be covered in the housekeeping post). The wet separator has a water column that passivates the metal powder and renders it non-reactive to allow for easier disposal (to be covered in the environmental post). Wet separators require a significant amount of maintenance, particularly when dealing with reactive metals like Titanium and Aluminum alloys, where the supplier recommends the wet separator be cleaned out on a daily basis. At least one company has developed a kit to help with wet separator cleaning – which gives you an indication of how significant of an issue this is. Most suppliers provide a wet separator along with their equipment.
1.2 Glove Box
A glove box is a useful piece of equipment for dealing with reactive metals in particular. The glove box allows an operator to manage all the powder handling in the build chamber to be done in a closed environment. For non-reactive metals this is not a necessary piece of equipment but it is highly recommended for reactive metals. The glove box when used in concert with reactive metals will allow for inert gas flushing out of oxygen to low PPM levels prior to operator intervention, and also includes grounding connections for the box to the machine. The nice thing about having a glove box is it reduces the amount of time you need to have a respirator on by allowing you to add powder and unpack builds in a closed environment. The glove box may also be integrated into the machine itself – ours is a stand alone device on wheels that we roll over to the machine when we need it.
1.3 Powder Sieve
Unless you plan on disposing all the powder in each build after it is completed, you need a sieve to separate out the larger particles and contaminants from the powder you wish to reuse in subsequent builds. The sieves are also typically provided with the machine and can be enabled with inerting capability (as shown in Fig 4 on the left, or as shown on the right, come as a small desktop unit that can sieve about 3-5 lbs of powder at a time). While the sieve on the left may be used for reactive metal sieving, it is uncertain if one can safely use the desktop sieve for the same, even with grounding the table it sits on and the operator – this is a gray area and I am keen to hear thoughts on this from those that have the expertise/experience in this space.
1.4 Ultrasonic Cleaner
The purpose of the ultrasonic cleaner is to remove as much trapped powder as possible before the part and the build plate are subjected to any post-processing – this is to minimize the risk of trapped powder getting airborne during downstream processes – which cannot be completely eliminated (which is why PPE should be used all the way through till the final part is in hand after cleaning).
The Ultrasonic cleaner is used twice: first before the parts are removed from the build plate, and again after they are removed. Sometimes I will even use it a third time after all supports have been removed, if the part has internal p. I typically use the 40 kHz and 60 C temperature setting but have not sought to further optimize the parameters at this time.
2. Post-Processing Equipment
The purpose of the furnace is to relieve residual stresses built in the parts prior to removing them from the build plate. So this is the first step after the parts and the plate come out of the ultrasonic cleaner. We use a furnace that allows for nitrogen or argon flushing, and place our parts wrapped in stainless steel foil in a gas box. Instructions for heat treatment (time and temperature profile) are typically provided on the technical specifications that come with the material. Metals like stainless steel can be stress relieved in a nitrogen atmosphere but Inconels and Ti6Al4V for example require higher temperatures of between 800-1000 C and argon atmospheres – so you need to be setup for both gases if you are considering running more than 1 metal in your operation.
2.2 Support Removal
All parts are connected to the build plate by between 3-5mm of supports that need to be removed. This is a two step process: the first step involves removing the parts with supports off the build plate, and this is most commonly done with a table saw or a wire EDM. At PADT, we stumbled upon a third way to do this, using an oscillating hand tool and a carbide blade – which works well for small parts (<3″ in X-Y space). It is important to always wear gloves and a supplier recommended (N95 or higher) respirator while removing supports since there could be trapped powder in the supports that was not removed with the Ultrasonic cleaner. The second step is to use hand tools to pry out the supports from the part – this is why it is important to design supports that have weak mechanical connections to the part itself – ideally you can tear them off with hand tools like a perforated sheet of paper [Video below courtesy Bob Baker at PADT, Inc].
2.3 Die Grinder
A carbide die grinder is then used to grind away the support-model interface – for tiny parts, this can be achieved with a hand file as well for some parts but is easier to do with a die grinder. For large parts, this need can be eliminated by designing in regions that are to be machined later and aligning these regions with supported regions, so as to reduce the need for finishing on these surfaces.
2.4 Face Milling
This may come as a bit of a surprise, but you also need some way of replenishing the build plates after use so you can re-use the plates – this involves using a face milling technique to remove all the remnant supports on the build plate and take off a thin slice at the top of the build plate, while retaining flatness to within 100 microns (0.004″). Having this capability in-house will greatly speed-up your ability to start successive prints and reduce the need to keep large inventories of build plates [Video below courtesy Bob Baker at PADT, Inc].
2.5 Surface Finishing
A combination of techniques can be used for surface finishing. At a minimum, you must have the ability to do glass bead blasting – this is both for the printed parts, but also for the build plate itself – a bead blasted finish is recommended to improve the adhesion of the first layer of powder to the build plate.
2.6 Other Capabilities
The list above is what I would consider a minimum list of capabilities one needs to get started in metal 3D printing, but is not comprehensive and does not include facility, safety, environmental and housekeeping requirements which I will cover in future posts. Additional CNC equipment for machining metal AM parts, heat treatment and HIP, and superior surface finishing and cleaning techniques are often called upon for metal AM production, but these are highly dependent on application and part design, which is why I have left them out of the above list.
Move on to part 2 of this series where I discuss the facilities requirements for metal 3D printing (electrical, inert gas etc.). Did I miss anything or do you have a better way of doing the things described above? Please send your thoughts to email@example.com, citing this blog post, or connect with me on LinkedIn.
Acknowledgements: Garrett Garner at Concept Laser, Inc and Bob Baker at PADT, Inc. for their insight and expertise that helped us select and bring in the above capabilities at PADT.
Sometimes we run across some great exampls of industry and academia working together and like to share them as examples of win-win partnerships that can move technology forward and give studends a great oportunity. A current Capstone Design Project by students at ASU Polytechnique is a great example. It is also an early exmple of what can be done at the brand new Additive Manufacturing Center that was recently opened at the campus.
I’ll let ASU Mecanical Enginering Systems student Dean McBride tell you in his own words:
Orbital ATK in Chandler currently utilizes two Stratasys Dimension SST 1200es printers to prototype various parts with. These printers print on parts trays, which must be removed and re-inserted into the printer to start new prints. Wanting to increase process efficiency, Orbital had the desire of automating this 3D printing process during times when employees are not present to run the printers. After the idea was born, Orbital presented this project to ASU Polytechnic as a potential senior capstone design project. Shortly after, an ambitious team was assembled to take on the project.
Numerous iterations of the engineering design process took place, and the team finally arrived at a final solution. This solution is a Cartesian style robot, meaning the robot moves in linear motions, similar to the 1200es printer itself. The mechanical frame and structure of the robot have been mostly assembled at this point. Once assembly is achieved, the team will focus their efforts on the electrical system of the robot, as well as software coding of the micro-controller control system. The team will be working to fine tune all aspects of the system until early May when the school semester ends. The final goal of this project is to automate at least two complete print cycles without human interaction.
Here is a picture of the team with the robot they are building along side the Stratasys FDM printer they are automating.
In a previous post, I laid out a structural classification of cellular structures in nature, proposing that they fall into 6 categories. I argued that it is not always apparent to a designer what the best unit cell choice for a given application is. While most mechanical engineers have a feel for what structure to use for high stiffness or energy absorption, we cannot easily address multi-objective problems or apply these to complex geometries with spatially varying requirements (and therefore locally optimum cellular designs). However, nature is full of examples where cellular structures possess multi-objective functionality: bone is one such well-known example. To be able to assign structure to a specific function requires us to connect the two, and to do that, we must identify all the functions in play. In this post, I attempt to do just that and develop a classification of the functions of cellular structures.
Any discussion of structure in nature has to contend with a range of drivers and constraints that are typically not part of an engineer’s concern. In my discussions with biologists (including my biochemist wife), I quickly run into justified skepticism about whether generalized models associating structure and function can address the diversity and nuance in nature – and I (tend to) agree. However, my attempt here is not to be biologically accurate – it is merely to construct something that is useful and relevant enough for an engineer to use in design. But we must begin with a few caveats to ensure our assessments consider the correct biological context.
1. Uniquely Biological Considerations
Before I attempt to propose a structure-function model, there are some legitimate concerns many have made in the literature that I wish to recap in the context of cellular structures. Three of these in particular are relevant to this discussion and I list them below.
1.1 Design for Growth
Engineers are familiar with “design for manufacturing” where design considers not just the final product but also aspects of its manufacturing, which often place constraints on said design. Nature’s “manufacturing” method involves (at the global level of structure), highly complex growth – these natural growth mechanisms have no parallel in most manufacturing processes. Take for example the flower stalk in Fig 1, which is from a Yucca tree that I found in a parking lot in Arizona.
At first glance, this looks like a good example of overlapping surfaces, one of the 6 categories of cellular structures I covered before. But when you pause for a moment and query the function of this packing of cells (WHY this shape, size, packing?), you realize there is a powerful growth motive for this design. A few weeks later when I returned to the parking lot, I found many of the Yucca stems simultaneously in various stages of bloom – and captured them in a collage shown in Fig 2. This is a staggering level of structural complexity, including integration with the environment (sunlight, temperature, pollinators) that is both wondrous and for an engineer, very humbling.
The lesson here is to recognize growth as a strong driver in every natural structure – the tricky part is determining when the design is constrained by growth as the primary force and when can growth be treated as incidental to achieving an optimum functional objective.
Even setting aside the growth driver mentioned previously, structure in nature is often serving multiple functions at once – and this is true of cellular structures as well. Consider the tessellation of “scutes” on the alligator. If you were tasked with designing armor for a structure, you may be tempted to mimic the alligator skin as shown in Fig. 3.
As you begin to study the skin, you see it is comprised of multiple scutes that have varying shape, size and cross-sections – see Fig 4 for a close-up.
The pattern varies spatially, but you notice some trends: there exists a pattern on the top but it is different from the sides and the bottom (not pictured here). The only way to make sense of this variation is to ask what functions do these scutes serve? Luckily for us, biologists have given this a great deal of thought and it turns out there are several: bio-protection, thermoregulation, fluid loss mitigation and unrestricted mobility are some of the functions discussed in the literature [1, 2]. So whereas you were initially concerned only with protection (armor), the alligator seeks to accomplish much more – this means the designer either needs to de-confound the various functional aspects spatially and/or expand the search to other examples of natural armor to develop a common principle that emerges independent of multi-functionality specific to each species.
1.3 Sub-Optimal Design
This is an aspect for which I have not found an example in the field of cellular structures (yet), so I will borrow a well-known (and somewhat controversial) example  to make this point, and that has to do with the giraffe’s Recurrent Laryngeal Nerve (RLN), which connects the Vagus Nerve to the larynx as shown in Figure 5, which it is argued, takes an unnecessarily long circuitous route to connect these two points.
We know that from a design standpoint, this is sub-optimal because we have an axiom that states the shortest distance between two points is a straight line. And therefore, the long detour the RLN makes in the giraffe’s neck must have some other evolutionary and/or developmental basis (fish do not have this detour) . However, in the case of other entities such as the cellular structures we are focusing on, the complexity of the underlying design principles makes it hard to identify cases where nature has found a sub-optimal design space for the function of interest to us, in favor of other pressing needs determined by selection. What is sufficient for the present moment is to appreciate that such cases may exist and to bear them in mind when studying structure in nature.
2. Classifying Functions
Given the above challenges, the engineer may well ask: why even consider natural form in making determinations involving the design of engineering structures? The biomimic responds by reminding us that nature has had 3.8 billion years to develop a “design guide” and we would be wise to learn from it. Importantly, natural and engineering structures both exist in the same environment and are subject to identical physics and further, are both often tasked with performing similar functions. In the context of cellular structures, we may thus ask: what are the functions of interest to engineers and designers that nature has addressed through cellular design? Through my reading [1-4], I have compiled the classification of functions in Figure 6, though this is likely to grow over time.
This broad classification into structural and transport may seem a little contrived, but it emerges from an analyst’s view of the world. There are two reasons why I propose this separation:
Structural functions involve the spatial allocation of materials in the construction of the cellular structures, while transport functions involve the structure AND some other entity and their interactions (fluid or light for example) – thus additional physics needs to be comprehended for transport functions
Secondly, structural performance needs to be comprehended independent of any transport function: a cellular structure must retain its integrity over the intended lifetime in addition to performing any additional function
Each of these functions is a fascinating case study in its own right and I highly recommend the site AskNature.org  as a way to learn more on a specific application, but this is beyond the scope of the current post. More relevant to our high-level discussion is that having listed the various reasons WHY cellular structures are found in nature, the next question is can we connect the structures described in the previous post to the functions tabulated above? This will be the attempt of my next post. Until then, as always, I welcome all inputs and comments, which you can send by messaging me on LinkedIn.