Aerospace Summit, Additive Manufacturing Peer Group, and Industry-Education Partnership – A Three Event, Three State Hat Trick

Sometimes everything happens at once.  This June 22nd was one of those days.  Three key events were scheduled for the same time in three different states and we needed to be at all of them. So everyone stepped up and pulled it off, and hopefully some of you reading this were at one of these fantastic events.  Combined they are a great example of PADT’s commitment to the local technology ecosystem, showing how we create true win-win partnerships across organizations and geographies.   Since the beginning we wanted to be more than just a re-seller or just consultants, and this Thursday was a chance to show our commitment to doing just that.

Albuquerque: New Mexico Technology Council 3D Printing Peer Group Kickoff

Everyone talks about how they thing we should all work together, but there never seems to be someone who is willing to pull it all together. That is how the additive manufacturing committee in New Mexico was until the New Mexico Technology Council (NMTC) stepped up to host a peer group around 3D Printing.  Even though it was a record 103f in Albuquerque, 35 brave 3D Printing enthusiasts ventured out into the heat and joined us at Rio Bravo Brewing to get the ball rolling on creating a cooperative community.  We started with an introduction from NMTC, followed by an overview of what we want to achieve with the group. Our goals are:

  1. Create stronger cooperation between companies, schools, and individuals involved in 3D Printing in New Mexico
  2. Foster cooperation between organizations to increase the benefits of 3D Printing to New Mexico
  3. Make a contribution to New Mexico STEM education in the area of 3D Printing

To make this happen we will meet once a quarter, be guided by a steering committee, and grow our broad membership.  Anyone with any involvement in Additive Manufacturing in the state is welcome to join in person or just be part of the on-line discussion.

Then came the best part, where we went around the room and shared our names, orginization, and what we did in the world of 3D Printing.  What a fantastic group.  From a K-12 educator to key researchers at the labs, we had every industry and interest representing. What a great start.

Here are the slides from that part of the presentation:

NMTC-PADT-3D-Printing-Peer-Group-2017_06_22

Once that was done PADT’s Rey Chu gave a presentation where it went over the most important developments in Additive Manufacturing over the last year or so.  He talked about the three new technologies that are making an impact, new materials, and what is happening business wise.  Check out his slides to learn more:

NMTC-PADT-New-3D-Printing-2017_06_22

After a question and answer period we had some great conversations in small groups, which was the most valuable part.

If you want to learn more, please reach out to info@padtinc.com and we will add you to the email list where we will plan and execute future activities.  We are also looking for people to be on the steering committee and locations for our next couple of meetings. Share this with as many people as you can in New Mexico so that next event can be even better!

Denver: MSU Advance Manufacturing & Engineering Sciences Building Opening

Meanwhile, in Denver it was raining.  In spite of that,  supporters of educating the next generation of manufacturers and engineers gathered for the opening of the Advanced Manufacturing and Engineering Sciences Building at Metropolitan State University.  This 142,000 sqft multi-disciplinary facility is located in the heart of downtown Denver and will house classes, labs, and local companies.  PADT was there to not only celebrate the whole facility, but we were especially excited about the new 3D Printing lab that is being funded by a $1 million gift from Lockheed Martin.  A nice new Stratasys Fortus 900 is the centerpiece of the facility.  It will be a while before the lab itself is done, so watch for an invite to the grand opening.  While we wait we are working with MSU, Lockheed Martin, Stratasys, and others to put a plan together to develop the curriculum for future classes and making sure that the engineers needed for this technology are available for the expected explosion of use of this technology.

Stratasys and PADT are proud to be partners of this fantastic effort along with many key companies in Colorado.  If you want to learn more about how we can help you build partnerships between industry and academia, please reach out to info@padtinc.com or give us a call.

Phoenix:  2017 Aerospace, Aviation, Defense + Manufacturing Conference

The 113f high in Phoenix really didn’t stop anyone from coming to the AADM conference. This annual event was at ASU SkySong in Phoenix and is sponsored by the AZ Tech Council, AZ Commerce Authority, and RevAZ.  PADT was proud to not only be a sponsor, but also have a booth, participate in the advanced manufacturing panel discussion, and do a short partner presentation about what we do for our Aerospace and Defense Customers.

Here is Rob’s presentation on PADT:

PADT-AeroConf-AZTC-2017

We had great conversations at our booth with existing customers, partners, and a few people that were new to us.  This is always one of the best events of the summer, and we look forward to next year.

If you want to know more about how PADT can help you in your Aerospace, Defense, and Manufacturing efforts, reach out and contact us.

Albuquerque Business First: Viewpoint – 5 things that make high-tech business in NM unique (for better and worse)

ABF-Albuquerque_Business_FirstNew Mexico is a unique place in culture, beauty and art. It’s also very unique when it comes to the high-tech industry — both in good ways, and in bad. In “Viewpoint: 5 things that make high-tech business in NM unique (for better and worse)” I share some of my thoughts on what makes New Mexico special from a tech business standpoint.  This is our first posting for the New Mexico cousin of the Phoenix Business Journal. We hope to do more.

PADT’s Albuquerque Open House a Big Success

a1aPADT was pleased to hold our first Open House in our New Mexico office this Tuesday (8/13/2013).  We had a great crowd show up to see what we are up to in Albuquerque and around the state, learn about the latest in 3D Printing, and even sneak some ANSYS technical support in.

Missed it?  Don’t worry, we have an Open House in Tempe in September and in Colorado in October.

The thing we learned quickly is that our customers here are smart, friendly, and knowledgeable.  Even though many had never met before, it didn’t take long for small clusters to form where people shared their background, the issues they faced, and solutions that worked for them.  Seeing that type of highly technical interaction between people who had just met was great.  Here are just a few pictures from the event:

a5a

The new Polyjet 30Pro was the big hit.  So small, but so capable. Many of the attendees are existing FDM users so they enjoyed learning about the different advantages of Polyjet 3D Printing.

a3a

Lots of great conversations took place in the entry way.

a2a

With an expert like Jeff Strain in town for the day, a couple of customers got in some one-on-one technical support for ANSYS products.  This showed that we definitely need to set up some standard office hours in Albuquerque for the user community.

a4a

We just could not resist playing with the new cleaning station for the Polyjet parts.  Just like Homer Simpson.  Note our special clock for the New Mexico Office, made on our Stratasys FDM machines.

 

Polyjet 3D Printers Up and Running in Denver and Albuquerque Offices

PADT-Polyjet-Albuquerque PADT-Polyjet-Denver

With all the opening and moving of offices we failed to notice that our crack sales team sold all of our demonstration 3D Printing and rapid manufacturing machines out from underneath us.  This made it easier to move, but hard on customers who wanted to see these systems in action.  So we took the opportunity to not only replace the FDM systems in our offices, but to also add Objet30 Pro desktop printers in our New Mexico and Colorado offices.  In the past we only had Polyjet systems in our Tempe facility.

If you are not familiar with the advantages of Polyjet 3D Printing when compared to FDM or other technologies, contact us to arrange a visit to our Littleton, Albuquerque, or Tempe offices to not only see these machines in action, but to also see sample parts we have made on them.

 

 

 

PADT Expands Local 3D Printing, Support, and Simulation Services with New Albuquerque Office

Web-PADT-Front-Door-New-Mexico

We are very pleased to announce that PADT is opening new local office in Albuquerque, New Mexico in the Sandia Science and Technology Park. The office will focus on providing sales, technical support, 3D Printer maintenance, and a meeting space to better serve customers in New Mexico.

Some of PADT’s earliest customers came from the state of New Mexico, and the company provides products, support, and services to many organizations in the area, including all of the major universities, the National Labs, and dozens of commercial companies. The new office will allow the local team, and employees visiting from PADT’s Colorado or Arizona locations, the opportunity to work in a familiar location, have direct access to PADT’s infrastructure, and provide customers a location to view the 3D Printing, simulation, and product development technologies that PADT offers. The location at the Eubank entrance to Kirtland AFB and Sandia National Labs give direct access to the highest concentration of PADT customers in the state.

The sales team in the  PADT New Mexico office will focus on distributing three  products lines:  The first is the complete suite of simulation software from ANSYS, Inc. (ANSS) (www.ANSYS.com). These tools are used by companies around the world to simulate products before testing, resulting in better performance for less cost and in less time.  The second line of products are the 3D Printer and Direct Digital Manufacturing systems from Stratasys (SSYS) (www.STRATASYS.com).  Both ANSYS, Inc. and Stratasys are the world leaders in their respective markets, and PADT is proud to be one of their reselling partners for Colorado, Utah, Nevada, Arizona and New Mexico.  The third product line is PADT’s CUBE Systems, (www.padtinc.com/cube-hvpc) their own brand of High Value Performance Computers specifically designed and configured for the advanced simulation user.

Additionally, the office will serve as a place for PADT’s technical staff to work together at a single location, providing simulation consulting, training and technical support.  As the company grows, the area has sufficient expansion opportunities to allow for more employees and equipment.

You can read the official announcement on the press release:

Press_release

http://www.prlog.org/12158073.pdf

Here are some images of the new office:

PADT-New-Mexico-Building

The office is literally on the corner of Research and Innovation at:

PADT New Mexico
1451 Innovation Parkway
Suite 402
Albuquerque, NM  87123

2013-06-14 17.43.36

Still working on signage, but we used a large monitor to add a little touch to the entrance

Prarie_Dog_SSTP_Welcome(Note the little welcome creature in the lower right of the image)

The office is located at the Sandia Science and Technology Park on the east side of Albuquerque, just south of I-40 near the Eubank gate to Kirtland AFB and Sandia National Labs:

PADT-New-Mexico-Map