What we Learned at the Geomagic Conference about Design X and Control X

On September 11th and 12th Mario Vargas (Hardware Manager for PADT Inc.) and I (James Barker, Application Engineer for PADT Inc.) attended Convergence 2017 in Los Angeles, CA.  This event is held by 3D Systems and is the America’s Software Partner Meeting.  Many strategic partners were in attendance from all across the USA, Canada, and Latin America.  We were able to learn about some new enhancements to Geomagic that will help you with Inspection or Reverse Engineering BIG time!  The first day of meetings we heard from Vyomesh Joshi (CEO of 3D Systems referred to as VJ).  He mentioned that 3D Systems has committed 17% to R&D and after going to this event it is apparent!  VJ briefly talked about each of their software options.  The 1st being Control X and how Polyworks currently has the edge for inspection software but after this next software release, he and other 3D Systems employees seemed confident that they could surpass Polyworks.  The 2nd software he talked about was Freeform which allows users to freely design parts by using a haptic device.  This software would be great for creating custom shapes on a whim.  If you haven’t tried a haptic device, you need to!  It will blow your mind as a designer with the freedom you get by using the haptic device and this Freeform Software.  The 3rd software he talked about was Cimatron which aids in the design of mold and die design.  Of the top 10 largest USA mold makers, 7 of them use Cimatron Software.  The 4th software is something new that will be released later this month.  I would love to tell you more about it but can’t….  sorry!

A little about why Mario and I attended this convention, PADT Inc. offers 3D Scanning as both a service and also as hardware or software you can buy.  We use both Geomagic Design X and Geomagic Control X and have experts that are scanning parts for customers for either inspection results or for reverse engineering purposes at our Tempe, AZ office.  The scanner that we use is a CMM quality scanner from Zeiss.  This scanner is capable of scanning 5 million points per scan!  We also offer 3D Systems Capture and Capture Mini scanners which are great tools for reverse engineering.  Each time they scan a part they are capturing about 1 million points per scan.  I am located in the Salt Lake City, Utah office and have a Capture Mini scanner that anyone wanting to see and demo, can come look at and evaluate at our office.  Same holds true for the Capture scanner and Zeiss scanner in our Tempe, AZ Headquarters.  Since we offer these services, we love knowing what new tools are available with these product releases.

Jumping back to the conference, on September 12th, there were breakout sessions.  We chose to go to the Geomagic Design X session to see what enhancements have been made.  This software is the preferred software in all of the industry for reverse engineering parts.  There were many different vendors/partners in the room we were at.  There was even a rep from Faro who prefers to sell Geomagic Design X software with each Faro Arm that he sells because this software is so powerful.  The neat thing about this software is all of the improvements that have been made to it.  If you are accustomed to designing parts with Solidworks, Solidedge, NX, Catia, Pro-E or any of the other CAD software, you will be able to use this software with ease.  Every command that you execute within Design X is editable just like the major CAD software.  You have the ability to create sketches on planes or to make life even easier, there are wizards that automatically create sketches and perform a command like an extrusion or revolve that is editable after completing the wizard.  After you have finished reverse engineering your parts within Design X, you can live transfer your new CAD data over to the above-mentioned CAD software.  Once you have imported this data into NX or Solidworks, you can again edit any of the sketches that were created within Design X but now in your software of choice!  I would love to show you how powerful this software is.  There is a reason why it is the preferred reverse engineering software in the industry.

Geomagic Control X session was next.  It also happened to be the last session of the day.  To be honest, I have only used Design X so I was looking forward to learning more about this software.  From all the demo’s that I have seen in the past from this software, it appeared really hard to use.  That is all changing with this new software release and is the reason why VJ is confident that it will compete and could exceed Polyworks as the preferred software for inspection.  The biggest thing that stuck out to me was the ability to set up a workflow for scanned data for inspection so that you can create your inspection reports.  The idea is that if you have a part that needs to be inspected for quality, you 3D scan the part and then import the CAD file.  By overlaying the scanned data over the CAD data you can show the deviation within the 2 parts and you are able to have different views in a 3D PDF to share with others the actual quality of the part.  As you are assigning your GD&T to this first inspection file, you are creating the first steps of the workflow.  There are many options for the workflow that you can create and 3D Systems has made it easy to create the workflow.  I feel that the power of this software is when you can open up the results of the first inspection report and do a split screen on your monitor to show the 100th or 1,000th part side by side and see how that part deviates from the first.

I had a great time in California at this event even though all of our time was spent at the hotel.  The streets looked nice from the window on the 11th floor.  Maybe next time we will venture out!  If anyone from 3D Systems is reading this, let’s go out to eat next time instead of eating at the hotel for breakfast, lunch, and dinner!  Although the view from the dining room was nice!

If you have any questions about 3D scanning whether it is for Inspection or for Reverse Engineering, let us know at PADT Inc.  We look forward to helping you.

Jet Engines to Golf Clubs – Phoenix Area ANSYS Users Share their Stories

ansys-padt-skysong-conference-1There is nothing better than seeing the powerful and interesting way that other engineers are using the same tools you use.  That is why ANSYS, Inc. and PADT teamed up on Thursday to hold an “ANSYS Arizona Innovation Conference”  at ASU SkySong where users could come to share and learn.

The day kicked off with Andy Bauer from ANSYS welcoming everyone and giving them an update on the company and some general overarching direction for the technology.  Then Samir Rida from Honeywell Aerospace gave a fantastic keynote sharing how simulation drive the design of their turbine engines.  As a former turbine engine guy, I found it fascinating and exciting to see how accurate and detailed their modeling is.

img_1629b

Next up was my talk on the Past, Present, and Future of simulation for product development.  The point of the presentation was to take a step back and really think about what simulation is, what we have padt-ansys-innovation-az-2016-pptbeen doing, and what it needs to look at in the future.  We all sort of agreed that we wanted voice activation and artificial intelligence built in now.  If you are interested, you can find my presentation here: padt-ansys-innovation-az-2016.pdf.

After a short break ANSYS’s Sara Louie launched into a discussion on some of the new Antenna Systems modeling capabilities, simulating multiple physics and large domains with ANSYS products.  The ability to model the entire interaction of an antenna including large environments was fascinating.

Lunchtime discussions focused on the presentations in the morning as well as people sharing what they were working on.

img_1632The afternoon started with a review by Hoang Vinh of ANSYS of the ANSYS AIM product. This was followed by customer presentations. Both Galtronics and ON Semiconductor shared how they drive the design of their RF systems with ANSYS HFSS and related tools.  Then Nammo Talley shared how they incorporated simulation into their design process and then showed an example of a projectile redesign from a shoulder launched rocket that was driven by simulation in ANSYS CFX.  They had the added advantage of being able to show something that blows up, always a crowd pleaser.

ping-ansysAnother break was followed by a great look at how Ping used CFD to improve the design of one of their drivers.  They used simulation to understand the drag on the head through an entire swing and then add aerodynamic features that improved the performance of the club significantly. Much of the work is actually featured in an ANSYS Advantage article.

We wrapped things up with an in depth technical look at Shock and Vibration Analysis using ANSYS Mechanical and Multiphysics PCB Analysis with the full ANSYS product suite.

The best part of the event was seeing how all the different physics in ANSYS products were being used and applied in different industries.  WE hope to have similar events int he future so make sure you sign up for our mailings, the “ANSYS – Software Information & Seminars” list will keep you in the loop.

img_1628

 

 

AmCon Phoenix 2015: Comments and Presentation Notes

prezo_padt_amcon_phoenix-2015We just finished up our third and final AmCon show of the year at what turned out to be the best show of the three.  The PADT booth was packed during the exhibition time with a wide variety of people asking questions and checking out examples of what PADT and Stratasys can do.  We were able to meet with a lot of our local customers, and even better, were able to get to know a ton of new potential clients.  Some shows are kind of boring and people just don’t get what we do. AmCon shows are the exact opposite. The attendees are smart, informed, and eager to learn more.

As is usual, we had a collection of parts on display. We also had a Geomagic Capture scanner showing off our growing offering of optical scanning solutions.  Here is a picture of Mario at the show.  He definitely photographs the best:

mario_padt_amcon_phoenix-2015In addition to the booth, we were asked to speak on 3D Printing at the event.  Yours truly gave a presentation entitled: “The Practical Application of 3D Printing for Prototyping, Tooling, and Production” that lasted a bit over an hour.

As promised the notes from that presentation can be downloaded here.

We hope to see more of you at future events. If you have questions about 3D Printing and its application please don’t hesitate to contact us.