Getting to Know PADT: Simulation Services

This is the fourth installment in our review of all the different products and services PADT offers our customers. As we add more, they will be available here.  As always, if you have any questions don’t hesitate to reach out to info@padtinc.com or give us a call at 1-800-293-PADT.

The A in PADT actually stands for Analysis.  Back in 1994 when the company was started, computer modeling for mechanical engineering was called Analysis. It was such an important part of what we wanted to achieve that we put it in the name.  Unfortunately, Analysis was a bit to generic so the industry switched to Numerical Simulation, or simply simulation. In the 23 years since we started, analysis… sorry, simulation, has been not just a foundation for what PADT does for our customers, it has become a defacto tool in product development.  Through it all there has been a dedicated group here that is focused on providing the best simulation as a service to customers around the world.

Driving Designs with Simulation

Many companies know about PADT with regards to simulation because we are an ANSYS Elite Channel Partner – selling and supporting the entire suite of ANSYS simulation tools in the Southwestern US. The success of simulation in the design and development of physical products is a direct result of the fact that these fantastic tools from ANSYS can be used to drive the design of products.  This can be done in-house by companies designing the products, or outsourced to experts. And that is where PADT has come in for hundreds of customers around the world.  The expertise we use to support and train on ANSYS products derives directly from our real world experience providing CFD, structural, thermal, electromagnetic, and multiphysics simulations to help those customers drive their product development.

For those not familiar with simulation, or who only use the basic tools embedded in CAD software as a quick check, understanding why it is so important hinges on understand what it really is. Numerical Simulation is a methodology where a physical product is converted into a computer model that represents its physical behavior.  This behavior can be many different physics: stresses, vibration, fluid flow, temperature flow, high frequency electromagnetic radiation, sloshing of liquids, deformation during impact, piezoelectric response, heating from static electromagnetic waves, cooling from air flow. The list goes on and on. Pretty much anything you studied in physics can be modeled using a numerical simulation.

The process of doing the simulation consists of taking the physical object and breaking it into discrete chunks, often very small relative to the size of the object, so that equations can easily be written for each chunk that describes the physical behavior of that chunk relative to the chunks around it.  Imagine writing equations for the fluid flow in a complicated valve housing, very hard to do. But if you break it up into about one million small polyhedrons, you can write an equation for flow in and out of each polyhedron. These equations are then assembled into a giant matrix and solved using linear algebra.  That is why we need such large computers.  We mostly use the world’s leading software for this, from ANSYS, Inc.

More than Building and Running Models

Knowing how to build and run finite element and CFD models is key to providing simulation as a service. PADT’s team averages over 18 years of experience and few people come close to their knowledge on geometry preparation, meshing, setting up loads and boundary conditions, leveraging the advantages of each solver, and post processing. That is a good starting point. But what really sets PADT apart is the understanding of how the simulation fits into product development, and how the information gathered from simulation can and should be used.  Instead of providing a number or a plot, PADT’s experienced engineers deliver insight into the behavior of the products being simulated.

How each project is conducted is also something that customers keep coming back for.  Nothing is ever “thrown over the wall” our passed through a “black box.” From quote through delivery of final report, PADT’s engineers work closely with the customer’s engineers to understand requirements, get to the heart of what the customer is looking for, and deliver useful and actionable information.  And if you have your own in-house simulation team, we will work closely with them to help them understand what we did so they can add it to their capabilities. In fact, one of the most popular simulation services offered by PADT is automation of the simulation process with software tools written on top of ANSYS products.  This is a fantastic way to leverage PADT’s experience and knowledge to make your engineers more efficient and capable.

Unparalleled Breadth and Depth

Based on feedback from our customers, the other area where PADT really stands out is in the incredible breadth and depth of capability offered.  Whereas most service providers specialize in one type of simulation or a single industry, more than twenty years of delivering high-end simulation to evaluate hundreds of products has given PADT’s team a unique and special level of understanding and expertise. From fluid flow in aerospace cooling systems to electromagnetics for an antenna in a smart toy, a strong theoretical understanding is combined with knowledge about the software tools to apply the right approach to each unique problem.

No where is this breadth and depth exemplified than with PADT’s relationship with ANSYS, Inc. Since the company was founded, PADT engineers have worked closely with ANSYS development and product management to understand these powerful tools better and to offer their advice on how to make them better.  And each time ANSYS, Inc. develops or acquires a new capability, that same team steps up and digs deep into the functionality that has been added. And when necessary, adding new engineers to the team to offer our customers the same expert access to these new tools.

 

The best way to understand why hundreds of companies, many of them large corporations that are leaders in their industry, come to PADT from around the world for their simulation services needs is to talk to us about your simulation services needs. Regardless of the industry or the physics, our team is ready to help you drive your product development with simulation. Contact us now to start the discussion.

 

Press Release: 3D Printing Expertise from PADT Advances Aerospace Industry

ula-rocket-duct-made-from-3d-printed-partsMany of you may have seen the recent launch of an Atlas V rocket from United Launch Alliance (ULA).  We are honored to have lent our expertise to ULA’s 3D Printing efforts that resulted in the use of parts on that rocket made with additive manufacturing.   We will be talking about that and other ways we help the Aerospace Industry at the 32nd Space Symposium this week in Colorado Springs Colorado.  Please stop by!

Read more in the press release.  A PDF can be found here.

Press Release:

3D Printing Expertise from PADT Advances Aerospace Industry

Product design and development leader provides additive manufacturing support for United Launch Alliance Atlas V rocket

COLORADO SPRINGS, Colo.April 11, 2016PRLog — Phoenix Analysis & Design Technologies Inc. (PADT), the Southwest’s largest provider of Numerical Simulation, Product Development, and 3D Printing services and products, is highlighting its expertise this week at the 32nd Space Symposium,  the premier global, commercial, civil, military and emergent space conference.

During the symposium, PADT experts in additive manufacturing will be on hand to discuss the company’s technical expertise, logistics, sales and service capabilities in the exciting aerospace sector, which contributed to the successful launch on March 22 of a United Launch Alliance (ULA) Atlas V rocket. The Atlas V rocket made use of lightweight thermoplastic 3D printed parts, with the application of Stratasys technology supplied by PADT and consulting from PADT on how best to apply that technology to engineering, tooling, and production.

Stop by and visit PADT’s booth 1310 at the 32nd Space Symposium, April 11-14, in Colorado Springs, Colorado. http://www.spacesymposium.org/.

“PADT continues to be both a great supplier of both polymer and metal additive manufacturing technologies and an additive manufacturing technical consultant to ULA, supporting our Atlas V, Delta IV and future Vulcan Centaur launch vehicles,” said Greg Arend, ULA manager, Additive Manufacturing. “By consulting with PADT, we were able to understand how these technologies enhance our design and manufacturing process, saving time, money and weight. PADT’s knowledge of the use of both polymer and metal materials was instrumental in helping us achieve our success.”

In addition to supplying ULA with Stratasys’ polymer 3D Printing machines, PADT consulted with them early on andled a tour of Oakridge National Labs to help them understand the state of the art for both metal and polymer applications and produced a technological roadmap for both technologies that has largely been followed.  Assisted by PADT, both companies made use of additive manufacturing for engineering prototypes, then advanced to the production of tooling for manufacturing and developed the confidence needed to move to flight hardware.

The founders of PADT have been involved with additive manufacturing since the late 1980’s and the company was the first service provider in the Southwest in 1994.  Over the years, PADT has built a reputation for technical excellence and a deep understanding of how to apply various 3D printing technologies to enable real world applications.  Their sales team has shown the ability to sell sophisticated engineering products to companies large and small, and to provide excellent support to their customers.

“3D Printing is not just about makers, nor is it just about engineering prototypes,” said Rey Chu, co-owner, principal and director of Manufacturing Technologies at PADT. “Every day users are creating production hardware to produce usable parts that save them time and money. Ducts for rockets are a perfect application of 3D printed parts because they are complex, low volume, and can make single parts that need to be made in multiple pieces using traditional methods.”

About Phoenix Analysis and Design Technologies

Phoenix Analysis and Design Technologies, Inc. (PADT) is an engineering product and services company that focuses on helping customers who develop physical products by providing Numerical Simulation, Product Development, and Rapid Prototyping solutions. PADT’s worldwide reputation for technical excellence and experienced staff is based on its proven record of building long term win-win partnerships with vendors and customers. Since its establishment in 1994, companies have relied on PADT because “We Make Innovation Work.” With over 80 employees, PADT services customers from its headquarters at the Arizona State University Research Park in Tempe, Arizona, and from offices in Torrance, California, Littleton, Colorado, Albuquerque, New Mexico, and Murray, Utah, as well as through staff members located around the country. More information on PADT can be found at http://www.PADTINC.com

— End —