Major Enhancements in FLOWNEX 2015: Combustors, Importers, and Pipes

FlownexLogo_OfficialSimulation has revolutionized flow and heat transfer dependent systems over the past decades by minimizing costly physical testing and accelerating time to operation around the world. But for many companies, such simulation has largely focused on components and proved to be very time consuming. The technology advancements delivered by Flownex SE now offer a fast, reliable, and accurate total system and subsystem approach to simulation.


With the release of FLOWNEX 2015, users now have access to advanced combustor system level modeling and they can interact with more system and component simulation tools. This is on top of the already considerable capabilities found in the  tool

Gas Turbine Combustor Heat Transfer Library

During the Preliminary design phase or when considering modifications to existing combustor designs it’s essential to make realistic predictions of  mass flow splits through the  various air admission holes, total pressure losses liner temperatures along the length of the combustor etc.

FLOWNEX-2015-combustor-simulationAlthough very powerful, 3D CFD solutions of combustors are specialized, time consuming processes and therefore are seldom exclusively used during initial sizing of a combustor.

It has been demonstrated that 1D/2D network tools, like Flownex, are capable of predicting with reasonable accuracy the same trends as more detailed numerical models.

The advantage, however, is Flownex’s rapid execution, which allows design modifications and parametric studies to be conducted more simply than ever before. The ease of use and incredible speed of Flownex allows 1000s of preliminary designs to be evaluated under all modes of operation for steady state and dynamic cases. Furthermore, the data obtained from the one-dimensional analysis can be used as boundary conditions for a more detailed three-dimensional model, ultimately supplementing a typical combustor design work flow.

While the simulation of combustor systems was previously possible in the Flownex environment, much of the work of implementing industry standard heat transfer correlations was left to the user through scripting .Now in Flownex SE 2015 it’s all been built in to the tool, while maintaining the flexibility required to model any combustor configuration.

New components include

  • Film convection component
  • Fluid radiation component
  • Jet impingement heat transfer component

To sum up Flownex allows more accurate initial designs, less time is spent on advanced 3D combustor simulations and rig tests, thus reducing development time and cost.

Here is a Video that shows off these features:

Added importers and integration features

AFT Fathom/Impulse/Arrow importer

An importer was added to import the file formats of AFT products. The importer imports all the diameters, loss factors heights, etc. so 90% of the effort is done, and in some cases the networks solve without any modifications.

ROHR2 Integration (pipe stress analysis software)

Flownex has the ability to calculate forces during dynamic simulations. This is very useful in pipe stress analysis for surge or water hammer cases. The ability to import complete geometries from ROHR2 and export results in the format that ROHR2 expects natively has been added. This means a user can perform these combined analysis now with ROHR2 with the minimum of effort.

Fluid Importers

An Importer was added to import liquid and gas properties from CoolProp an open source fluid property library. The existing Aspen/Hysys fluid importer was changed to be a generic Cape-Open compliant importer. This means that fluid properties can now be imported from any Cape-Open compliant server software.