New 3D Design Capabilities Available in ANSYS 2019 R3 – Webinar

The ANSYS 3D Design family of products enables CAD modeling and simulation for all design engineers. Since the demands on today’s design engineer to build optimized, lighter and smarter products are greater than ever, using the appropriate design tools is more important than ever.

Rapidly explore ideas, iterate and innovate with ANSYS Discovery 3D design software, evaluate more concepts and rapidly gauge design performance through virtual design testing as you delve deeper into your design’s details, with the same results accuracy as ANSYS flagship products – when and where you need it.

Join PADT’s Training & Support Application Engineer, Robert McCathren for a look at the new 3D design capabilities available in ANSYS 2019 R3 for ANSYS Discovery AIM, Live, and SpaceClaim. These new updates include:

Mass flow outlets

Transient studies with time varying inputs

Structural beam support

Linear buckling support

Physics-aware meshing improvements

Mesh failure localization and visualization improvements

And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 049: Predicting & Controlling Environmental Pollution with ANSYS Simulation

 

Published on: October 21st, 2019
With: Eric Miller & Clinton Smith
Description:  

In this episode, your host and Co-Founder of PADT, Eric Miller is joined by PADT’s CFD Team Lead Engineer Clinton Smith for a discussion on how ANSYS fluids tools are being used to help predict and control environmental pollution. This information is helping engineers in a variety of ways, such as understanding the formation and dispersion of pollutants such as NOx, SOx, CO and soot.

If you would like to learn more about what this application is capable of, check out our webinar on the topic here: https://www.brighttalk.com/webcast/15747/374571

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Predicting & Controlling Environmental Pollution with ANSYS Simulation – Webinar

Environmental pollution has been a fact of life for many centuries, though it became a real issue after the start of the industrial revolution. An estimated 6.5 million premature deaths have been linked to air pollution every year.

In order to properly combat this growing issue, the world’s leading minds have turned to a more effective tool for environmental analysis; numerical simulation. Computational fluid dynamics has proven to be a powerful tool when it comes to predicting and controlling air, water, and noise pollution.

Join PADT’s CFD Team Lead Engineer Clinton Smith to learn how ANSYS fluid mechanics solutions provide insight and detailed understanding of the formation and dispersion of pollutants such as NOx, SOx, CO & Soot as well as effective ways for modelling pollution control equipment such as ESP’s, bag filters, and wastewater treatment plants.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 046: The Founding of CFX

 

Published on: September 9th, 2019
With: Eric Miller, Paul Galpin, & Brad Hutchinson
Description:  

In this episode, your host and Co-Founder of PADT, Eric Miller is joined by Paul Galpin and Brad Hutchinson, two founders of the Computational Fluid Dynamics (CFD) simulation tool now owned by ANSYS, called CFX. They discuss how they initially got into the world of simulation, the current state of CFD, and what is important to be aware of as it continues to grow and develop.

If you would like to learn more about what’s new in the latest version of CFX, check out PADT’s webinar on fluids updates in ANSYS 2019 R3 here: https://www.brighttalk.com/webcast/15747/369903

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Fluids Innovations in ANSYS 2019 R3 – Webinar

Products such as ANSYS Fluent, CFX, and Ensight work together in a constantly improving tool kit that is developed to provide ease of use improvements for engineers simulating fluid flows and the impact those flows have on physical models. 

Fluids simulation users will find that ANSYS 2019 R3 includes many enhancements that further simplify the user experience and broaden use to new applications. The new Fluent experience has been improved so you can enjoy more CFD in less time, with less training.

Join PADT’s Simulation Support and Application Engineer, Sina Ghods, for a look at what is new and improved for fluids simulation tools in ANSYS 2019 R3. This presentation includes updates regarding: 

  • Usability Enhancements
  • Watertight Geometry Workflow
  • TurboGrid & BladeEditor
  • Meshing Enhancements
  • And many more innovative capabilities

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Fluids Updates in ANSYS 2019 R2 – Webinar

ANSYS CFD goes beyond qualitative results to deliver accurate quantitative predictions of fluid interactions and trade-offs. These insights reveal unexpected opportunities for your product — opportunities that even experienced engineering analysts can miss.

Products such as ANSYS Fluent, Polyflow, and CFX work together in a constantly improving tool kit that is developed to provide ease of use improvements for engineers simulating fluid flows and it’s impacts on physical models.

Join PADT’s Simulation Support and Application Engineer, Sina Ghods, for a look at what is new and improved for fluids-related tools in ANSYS 2019 R2. This presentation includes updates regarding:

A new fluent experience

Parallel Mosaic-enabled meshing

Discrete Phase Modeling

Creating high-quality meshes for complex models

Transient elasticity for fluid structure interaction

And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 036 – Updates for Design Engineers in ANSYS 2019 R1 – Discovery Live, AIM, & SpaceClaim

 

Published on: May 6th, 2019
With: Eric Miller, Ted Harris, & Clinton Smith
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Manager Ted Harris, and CFD Team Lead Engineer Clinton Smith for a round-table discussion regarding new capabilities for Design Engineers in the latest release of the ANSYS Discovery family of products (Live, AIM, & SpaceClaim). Listen as they express their thoughts on exciting new capabilities, long anticipated technical improvements, and speculate at what has yet to come for this disruptive set of tools.

If you would like to learn more about this update and see the tools in action, check out PADT’s webinar covering ANSYS Discovery AIM & Live in 2019 R1 here: shorturl.at/gyKLM

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Analyze, Visualize, and Communicate – What’s New With EnSight In ANSYS 2019 R1 – Webinar

Effective prototyping in today’s day and age requires not only an understanding of your product’s capabilities but also those of the environment it operates in, and how said environment impacts its use.

Engineers are finding that it is no longer possible to ignore the interactions between fluids and the structures that surround them, as they strive to optimize their product’s performance. 

EnSight helps you visualize coupled fluid-structure interaction data to gain the insights you need; providing a highly effective environment regardless of the complexity of the situation and the simulation being run. After exploring your data, EnSight can also be used to create a high quality visual representation to effectively communicate your results, thanks to the ability to place your model in immersive environments, add realistic lighting conditions, and so much more. 

Join PADT’s CFD Team Lead Engineer, Clinton Smith as we explore the capabilities of this tool, and take a look at what’s new in ANSYS 2019 R1, including updates on:

  • Parallel Fluent to Parallel Ensight capabilities
  • Transnational visual symmetry
  • EnVision handling of multi-panel display
  • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 034 – Celebrating 25 Years of ANSYS Simulation: Changes In The Last Quarter Century & Where The Future Will Take Us

 

Published on: April 8th, 2019
With: Eric Miller, Ted Harris, Tom Chadwick, Sina Ghods, & Alex Grishin
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Ted Harris, Tom Chadwick, Sina Ghods, and Alex Grishin, for a round-table discussion on their experience and history with simulation, including what has changed since they started using it and what they’re most impressed and excited by, followed by some prediction and discussion on what the future may hold for the world of numerical simulation.

Thank you again for those of you who have made the past 25 years something to remember, and to those of you who have come to know PADT more recently, we look forward to what the next 25 will bring.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Introducing ANSYS Cloud Compute – Webinar

Engineering simulation has long been constrained by fixed computing resources available on a desktop or cluster. Today, however, cloud computing can deliver the on-demand, high performance computing (HPC) capacity required for faster high-fidelity results offering greater performance insight.

ANSYS Cloud delivers the speed, power and compute capacity of cloud computing directly to your desktop — when and where you need it. You can run larger, more complex and more accurate simulations to gain more insight into your product — or you can evaluate more design variations to find the optimal design without long hardware/software procurement and deployment delays.

Join PADT’s Application & Simulation Support Engineer Sina Ghods for a look at how ANSYS is working to drive adoption by providing users a ready to use cloud service that offers: 

  • Reduced Turnaround Time
  • More Accurate Results
  • Access to More Complex/Larger Models
  • Secure Workflows
  • And Much More
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Introducing ANSYS 2019 R1

PADT is excited to announce the release of ANSYS 2019 R1, the first group of updates for the suite of ANSYS simulation software this year. The release features updates for a wide variety of applications, including simulation for fluids, structures, electronics, 3D design, and much more.

We will be hosting a series of live webinars over the course of 2019 that will allow you to learn about what’s new in this release, from PADT’s team of expert support engineers.

Take a look at the following upcoming product update webinars for 2019 R1 and register by clicking the links below.

There is more to come, so stay tuned


Fluent Updates in ANSYS 2019 R1
Wednesday, February 13th – 11:00 am – 12:00 pm MST AZ

Computational Fluid Dynamics (CFD) is a tool with amazing flexibility, accuracy and breadth of application. Serious CFD, the kind that provides insights to help you optimize your designs, could be out of reach unless you choose your software carefully. Experienced engineers need to go further and faster with well-validated CFD results across a wide range of applications, and with ANSYS Fluent users are able to do just that; delivering reliable and accurate results.

Join Padt’s CFD Team Lead Engineer, Clinton Smith for a look at what new capabilities are available for the latest version of Fluent, in ANSYS 2019 R1.

Register Here


Mechanical Updates in ANSYS 2019 R1
Wednesday, March 13th – 11:00 am – 12:00 pm MST AZ

From designers and occasional users looking for quick, easy, and accurate results, to experts looking to model complex materials, large assemblies, and nonlinear behavior, ANSYS Mechanical enables engineers of all levels to get answers fast and with confidence. With applications for everything form strength analysis to topology optimization, it’s no wonder this comprehensive suite of tools continues to serve as the flagship mechanical engineering software solution.

Join PADT’s Simulation Support Manager, Ted Harris for a look at what new capabilities are available for ANSYS Mechanical, in the latest version; 2019 R1.

Register Here


High Frequency Electromagnetics Updates in ANSYS 2019 R1
Wednesday, April 10th – 11:00 am – 12:00 pm MST AZ

In today’s world of high performance electronics and advanced electrification systems, the effects of electromagnetic fields on circuits and systems cannot be ignored. ANSYS software can uniquely simulate electromagnetic performance across component, circuit and system design, evaluating temperature, vibration and other critical mechanical effects.

Join PADT’s Electrical Engineer, Michael Griesi for a look at what new capabilities are available with regards to High Frequency Electromagnetics, in the latest version of ANSYS; 2019 R1

Register Here


Discovery Updates in ANSYS 2019 R1
Wednesday, May 8th – 11:00 am – 12:00 pm MST AZ

The ANSYS 3D Design family of products enables CAD modeling and simulation for all design engineers. Since the demands on today’s design engineer to build optimized, lighter and smarter products are greater than ever, using the appropriate design tools is more important than ever.

Join PADT’s Simulation Support Manager, Ted Harris for a look at what exciting new features are available for design engineers in both Discovery Live and AIM, in ANSYS 2019 R1.

Register Here


If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!


All Things ANSYS 028 – A Year in Review: Predictions for ANSYS in 2019

 

Published on: January 7th, 2019
With: Eric Miller, Joe Woodward, & Ted Harris
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Manager Ted Harris, and Specialist Mechanical Engineer Joe Woodward, for a discussion on their predictions for ANSYS in 2019, and a look back at our predictions from 2018.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Discover What’s New in ANSYS Fluent 19.2 – Webinar

Don’t miss this informative presentation – Secure your spot today!

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 023 – Exploring the Latest & Greatest in ANSYS 19.2

 

Published on: October 22nd, 2018
With: Eric Miller, Joe Woodward, Ted Harris, & Tom Chadwick
Description:  

In this episode the technical support staff at PADT returns to join your host and Co-Founder of PADT, Eric Miller for a discussion on their favorite additions in ANSYS 19.2. This conversation includes PADT’s Specialist Mechanical Engineer Joe Woodward, Simulation Support Manager Ted Harris, & Senior CFD Engineer Tom Chadwick, and is followed by an update on news and events in the respective worlds of ANSYS and PADT.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 021 – Introducing the ANSYS Innovation Conference

 

Published on: September 24th, 2018
With: Eric Miller, Arkajyoti Chang, Chris Grieve, Aaron Edwards, and Andy Bauer
Description: In this episode your host and Co-Founder of PADT, Eric Miller is joined by Arkajyoti Chang of Benchmark Electronics, Chris Grieve of Optis World, and Aaron Edwards & Andy Bauer of ANSYS Inc., for a discussion on where their companies fit into the world of simulation, focusing on applications such as autonomous vehicles, chip packaging, antenna design, and more, as well as a brief synopsis of what they will be discussing at the upcoming Arizona ANSYS Innovaiton Conference on Wednesday, October 3rd. All that, followed by an update on news and events in the respective worlds of ANSYS and PADT.

For more information on the Arizona ANSYS Innovation Conference & a link to register visit: https://www.padtinc.com/AZInnovation18.html

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS