3D Printing the 4th Dimension – GISHWHES 2015 Scavenger Hunt

padt-sundial-insun-apple-watch-wGISHWHES is a huge international scavenger hunt. Every year teams around the globe comb through the list of 215 tasks and pick as many as possible that their team can do.  Last year they introduced 3D Printing as a task, and we helped a team 3D Print a quill pen. That was a lot of fun, so when this year’s list included an item on 3D printing, we jumped at the chance to be involved.

The item was:

110: VIDEO. Use a cutting edge 3D printer to 3D print your representation of the 4th dimension.62 POINTS

Being engineers we said “4th Dimension?  Time.”  Then it became a choice between the way mass distorts the space-time continuum or some sort of clock’ish thing.  The distortion thing seemed difficult so we focused on a clock.  Being that we were constrained on budget and time we decided to do a sundial.

The result can be seen here in this YouTube video.

It was a fun project and the team spent a bit of time in the 112F sunshine trying it out.  We can’t wait to see what we will get to do for the 2016 scavenger hunt.

Making the Model

A couple of people have asked if we downloaded the solid model for the sundial or if we made it. We actually made it. After a little bit of research we found that making a simple horizontal sundial like this one is very easy. Here are the steps we took:

Get Geometry Values

So it turns out that the angle of each hour line is determined by the latitude of where the dial will go. The angle of the pointy thing, called a gnomon, is also the latitude.  So for Tempe, AZ that is 33.4294°.That gets applied to the equation:

angle(h) = arctan(sin(L*tan(15° · h))

h = integer of the hour, 6 am to 6 pm
L = latitude

I plopped that into Excel:

=ABS(DEGREES(ATAN(SIN(RADIANS($C$3))*TAN(RADIANS(15)*B7))))

and got the following:

Latitude 33.4294
Hour Angle
6 90.00
7 64.06
8 43.66
9 28.85
10 17.64
11 8.40
12 0.00

Build the Solid Model

The next step is to build the model. I used SolidEdge because I know it real well and was able to knock it out quickly.  But all CAD tools would be the same:

  1. Pick a center point.
  2. Add lines as rays from that using the angles in the table above for each hour.
  3. Design the shape of your sundial to look cool. I did a simple circle .
  4. Mark the hours using the sketch. I raised up thin rectangles.
  5. Model the gnomon using the latitude as the angle.  Make this as fancy or simple as you want.
  6. Add whatever doo-dads you want.
  7. Label the hours if you want.
  8. Save to STL

Here is what my sketch looked like:PADT-sundial-cad-model-hour-sketc

And the final solid model looked like this:

PADT-sundial-cad-modelWe sent this to the printer as shown in the video, and got a sundial.

 

 

 

 

 

 

3D Printed Quill Pen for GISHWHES 2014 Scavenger Hunt

quill-pen-2Sometimes you get strange messages on Facebook.  This weekend I heard a beep and checked my phone “Can you 3D Print a Quill Pen?”  Most messages involve asking me why I posted something stupid or annoying, so this one caught my attention.  Turns out my friend Chelsea is taking part in the 2014 “GREATEST INTERNATIONAL SCAVENGER HUNT THE WORLD HAS EVER SEEN” or GISHWHES.  One of the items in the scavenger hunt is to print out an ink quill pen on a 3D Printer and write “We need to buy more Toner” on a sheet of paper with the pen.  

I can’t resist a challenge like that, so I told her no problem.  And it worked like a charm. 

The process we used was very straightforward:

First I went into a CAD program, SolidEdge in this case, and build a solid model of a quill pen.  Not being quill pen designer I found some web sites on how to cut a pen tip from a real feather, and tried to mimic the resulting geometry:

Quill-Cad-Model Pen-Tip-Quill-Pen
We then wrote an STL file out and sent that to our RP team.  They read that into our preparation software and separated the feathers from the stem, designating a rubber like material for the feather area for artistic purposes, and a hard white plastic for the stem and the tip.

That file was then sent to our Stratasys Objet500 Connex3 and printed in about 30 minutes.  

This video shows the printing process:

Once it was done, we just needed to wash out the support material and it was ready to go.

The moment of truth was then here.  Our intreped Scavenger Hunter took out her handy-dandy pot of India Ink and dipped the quill in, the she wrote out the requested message:
quill-pen-2

I worked like a charm, our handwriting was the biggest issue.

Wanting to see if it enhanced my artistic skills, I used it to sketch the following masterpiece:
quill-pen-face

This is why I use CAD systems.

Here is an image of the final part. The tip is stained black from the ink.
quill-pen-4

All and all a fun project, and I guess the team gets 80 points for doing this task, so we were glad to help.

You can learn more about 3D Printing by visiting here. Our contact us for more information on 3D Printing, Simulation, or Rapid Prototyping.