Aerospace Summit, Additive Manufacturing Peer Group, and Industry-Education Partnership – A Three Event, Three State Hat Trick

Sometimes everything happens at once.  This June 22nd was one of those days.  Three key events were scheduled for the same time in three different states and we needed to be at all of them. So everyone stepped up and pulled it off, and hopefully some of you reading this were at one of these fantastic events.  Combined they are a great example of PADT’s commitment to the local technology ecosystem, showing how we create true win-win partnerships across organizations and geographies.   Since the beginning we wanted to be more than just a re-seller or just consultants, and this Thursday was a chance to show our commitment to doing just that.

Albuquerque: New Mexico Technology Council 3D Printing Peer Group Kickoff

Everyone talks about how they thing we should all work together, but there never seems to be someone who is willing to pull it all together. That is how the additive manufacturing committee in New Mexico was until the New Mexico Technology Council (NMTC) stepped up to host a peer group around 3D Printing.  Even though it was a record 103f in Albuquerque, 35 brave 3D Printing enthusiasts ventured out into the heat and joined us at Rio Bravo Brewing to get the ball rolling on creating a cooperative community.  We started with an introduction from NMTC, followed by an overview of what we want to achieve with the group. Our goals are:

  1. Create stronger cooperation between companies, schools, and individuals involved in 3D Printing in New Mexico
  2. Foster cooperation between organizations to increase the benefits of 3D Printing to New Mexico
  3. Make a contribution to New Mexico STEM education in the area of 3D Printing

To make this happen we will meet once a quarter, be guided by a steering committee, and grow our broad membership.  Anyone with any involvement in Additive Manufacturing in the state is welcome to join in person or just be part of the on-line discussion.

Then came the best part, where we went around the room and shared our names, orginization, and what we did in the world of 3D Printing.  What a fantastic group.  From a K-12 educator to key researchers at the labs, we had every industry and interest representing. What a great start.

Here are the slides from that part of the presentation:

NMTC-PADT-3D-Printing-Peer-Group-2017_06_22

Once that was done PADT’s Rey Chu gave a presentation where it went over the most important developments in Additive Manufacturing over the last year or so.  He talked about the three new technologies that are making an impact, new materials, and what is happening business wise.  Check out his slides to learn more:

NMTC-PADT-New-3D-Printing-2017_06_22

After a question and answer period we had some great conversations in small groups, which was the most valuable part.

If you want to learn more, please reach out to info@padtinc.com and we will add you to the email list where we will plan and execute future activities.  We are also looking for people to be on the steering committee and locations for our next couple of meetings. Share this with as many people as you can in New Mexico so that next event can be even better!

Denver: MSU Advance Manufacturing & Engineering Sciences Building Opening

Meanwhile, in Denver it was raining.  In spite of that,  supporters of educating the next generation of manufacturers and engineers gathered for the opening of the Advanced Manufacturing and Engineering Sciences Building at Metropolitan State University.  This 142,000 sqft multi-disciplinary facility is located in the heart of downtown Denver and will house classes, labs, and local companies.  PADT was there to not only celebrate the whole facility, but we were especially excited about the new 3D Printing lab that is being funded by a $1 million gift from Lockheed Martin.  A nice new Stratasys Fortus 900 is the centerpiece of the facility.  It will be a while before the lab itself is done, so watch for an invite to the grand opening.  While we wait we are working with MSU, Lockheed Martin, Stratasys, and others to put a plan together to develop the curriculum for future classes and making sure that the engineers needed for this technology are available for the expected explosion of use of this technology.

Stratasys and PADT are proud to be partners of this fantastic effort along with many key companies in Colorado.  If you want to learn more about how we can help you build partnerships between industry and academia, please reach out to info@padtinc.com or give us a call.

Phoenix:  2017 Aerospace, Aviation, Defense + Manufacturing Conference

The 113f high in Phoenix really didn’t stop anyone from coming to the AADM conference. This annual event was at ASU SkySong in Phoenix and is sponsored by the AZ Tech Council, AZ Commerce Authority, and RevAZ.  PADT was proud to not only be a sponsor, but also have a booth, participate in the advanced manufacturing panel discussion, and do a short partner presentation about what we do for our Aerospace and Defense Customers.

Here is Rob’s presentation on PADT:

PADT-AeroConf-AZTC-2017

We had great conversations at our booth with existing customers, partners, and a few people that were new to us.  This is always one of the best events of the summer, and we look forward to next year.

If you want to know more about how PADT can help you in your Aerospace, Defense, and Manufacturing efforts, reach out and contact us.