PADT Opens Utah Office

PADT-UtahIt is now official: PADT has an office in the Salt Lake City area, second after the class A office space in Austin, TX.  Last week we signed a lease for a space at 5282 S Commerce Dr in Murray, Utah.  We have been looking for a while and when this location opened up we felt it was located in a great spot and was the size we needed.  It is 17 minutes from downtown Salt Lake City, less than 30 minutes to most of our SLC customers, and not a bad drive to those who are north and south, right up or down I-15.

This office will focus on providing sales and technical support to our Utah Stratasys and ANSYS customers.  It will provide enough space for a few demo 3D Printers and also has a great meeting room for training and mentoring sessions.

You can read more in the official press release here.  

To get a feel for where it is located, here is a screen grab.

        PADT-Utah-Office-Map

Proximity to some of the best skiing in the country was not much of a factor in the decision process… but it helped.

Here is a shot of Anthony, Doug, Patrick, and Mario modeling in the hallway. 

PADT-Utah-Team-Halway

It will take us a month or so to get everything up and running, but once done we will set up a time for an open house. Watch this space for more about our continued growth and success in Utah.

PADT Moves into Larger Colorado Office

If you visited our office in Littleton Colorado you will have noticed that we were kind of working on top of one another.  To alleviate the problem, we have moved down the street. Our new PADT Colorado office is still in historic downtown Littleton, we are actually on the main street now:

PADT-Littlteton-temp-pic

PADT Colorado
2009 W Littleton Blvd
Suite 200
Littleton CO 80120 

It is right next to the old Arapahoe County Court House. As you can see it is a “unique” building with a lot of character.  So we are looking forward to using some creativity in decorating the place to match the feeling of the building.  All staff members will be issued skinny ties and horn rimmed glasses. Engineers will be required to wear white short sleeved shirts and pocket protectors.

We are setting it up in stages, so we are still working on getting full Internet access, the company wide PADT phone system up and running, new furniture, and our demo machines.  Once all of that is done we will be announcing a “Grand Opening” open house.

But Norm, Patrick, Mike, and ManojPADT-Littleton-Satelite would be happy to have a visit anytime.  One of the nicer features is a balcony overlooking downtown and the Front Range. Stop by and enjoy the warm weather while it lasts. You can chat about Simulation, 3D Printing, or product development and we will call it work.

PADT Expands Local 3D Printing, Support, and Simulation Services with New Albuquerque Office

Web-PADT-Front-Door-New-Mexico

We are very pleased to announce that PADT is opening new local office in Albuquerque, New Mexico in the Sandia Science and Technology Park. The office will focus on providing sales, technical support, 3D Printer maintenance, and a meeting space to better serve customers in New Mexico.

Some of PADT’s earliest customers came from the state of New Mexico, and the company provides products, support, and services to many organizations in the area, including all of the major universities, the National Labs, and dozens of commercial companies. The new office will allow the local team, and employees visiting from PADT’s Colorado or Arizona locations, the opportunity to work in a familiar location, have direct access to PADT’s infrastructure, and provide customers a location to view the 3D Printing, simulation, and product development technologies that PADT offers. The location at the Eubank entrance to Kirtland AFB and Sandia National Labs give direct access to the highest concentration of PADT customers in the state.

The sales team in the  PADT New Mexico office will focus on distributing three  products lines:  The first is the complete suite of simulation software from ANSYS, Inc. (ANSS) (www.ANSYS.com). These tools are used by companies around the world to simulate products before testing, resulting in better performance for less cost and in less time.  The second line of products are the 3D Printer and Direct Digital Manufacturing systems from Stratasys (SSYS) (www.STRATASYS.com).  Both ANSYS, Inc. and Stratasys are the world leaders in their respective markets, and PADT is proud to be one of their reselling partners for Colorado, Utah, Nevada, Arizona and New Mexico.  The third product line is PADT’s CUBE Systems, (www.padtinc.com/cube-hvpc) their own brand of High Value Performance Computers specifically designed and configured for the advanced simulation user.

Additionally, the office will serve as a place for PADT’s technical staff to work together at a single location, providing simulation consulting, training and technical support.  As the company grows, the area has sufficient expansion opportunities to allow for more employees and equipment.

You can read the official announcement on the press release:

Press_release

http://www.prlog.org/12158073.pdf

Here are some images of the new office:

PADT-New-Mexico-Building

The office is literally on the corner of Research and Innovation at:

PADT New Mexico
1451 Innovation Parkway
Suite 402
Albuquerque, NM  87123

2013-06-14 17.43.36

Still working on signage, but we used a large monitor to add a little touch to the entrance

Prarie_Dog_SSTP_Welcome(Note the little welcome creature in the lower right of the image)

The office is located at the Sandia Science and Technology Park on the east side of Albuquerque, just south of I-40 near the Eubank gate to Kirtland AFB and Sandia National Labs:

PADT-New-Mexico-Map