Aerospace Summit, Additive Manufacturing Peer Group, and Industry-Education Partnership – A Three Event, Three State Hat Trick

Sometimes everything happens at once.  This June 22nd was one of those days.  Three key events were scheduled for the same time in three different states and we needed to be at all of them. So everyone stepped up and pulled it off, and hopefully some of you reading this were at one of these fantastic events.  Combined they are a great example of PADT’s commitment to the local technology ecosystem, showing how we create true win-win partnerships across organizations and geographies.   Since the beginning we wanted to be more than just a re-seller or just consultants, and this Thursday was a chance to show our commitment to doing just that.

Albuquerque: New Mexico Technology Council 3D Printing Peer Group Kickoff

Everyone talks about how they thing we should all work together, but there never seems to be someone who is willing to pull it all together. That is how the additive manufacturing committee in New Mexico was until the New Mexico Technology Council (NMTC) stepped up to host a peer group around 3D Printing.  Even though it was a record 103f in Albuquerque, 35 brave 3D Printing enthusiasts ventured out into the heat and joined us at Rio Bravo Brewing to get the ball rolling on creating a cooperative community.  We started with an introduction from NMTC, followed by an overview of what we want to achieve with the group. Our goals are:

  1. Create stronger cooperation between companies, schools, and individuals involved in 3D Printing in New Mexico
  2. Foster cooperation between organizations to increase the benefits of 3D Printing to New Mexico
  3. Make a contribution to New Mexico STEM education in the area of 3D Printing

To make this happen we will meet once a quarter, be guided by a steering committee, and grow our broad membership.  Anyone with any involvement in Additive Manufacturing in the state is welcome to join in person or just be part of the on-line discussion.

Then came the best part, where we went around the room and shared our names, orginization, and what we did in the world of 3D Printing.  What a fantastic group.  From a K-12 educator to key researchers at the labs, we had every industry and interest representing. What a great start.

Here are the slides from that part of the presentation:

NMTC-PADT-3D-Printing-Peer-Group-2017_06_22

Once that was done PADT’s Rey Chu gave a presentation where it went over the most important developments in Additive Manufacturing over the last year or so.  He talked about the three new technologies that are making an impact, new materials, and what is happening business wise.  Check out his slides to learn more:

NMTC-PADT-New-3D-Printing-2017_06_22

After a question and answer period we had some great conversations in small groups, which was the most valuable part.

If you want to learn more, please reach out to info@padtinc.com and we will add you to the email list where we will plan and execute future activities.  We are also looking for people to be on the steering committee and locations for our next couple of meetings. Share this with as many people as you can in New Mexico so that next event can be even better!

Denver: MSU Advance Manufacturing & Engineering Sciences Building Opening

Meanwhile, in Denver it was raining.  In spite of that,  supporters of educating the next generation of manufacturers and engineers gathered for the opening of the Advanced Manufacturing and Engineering Sciences Building at Metropolitan State University.  This 142,000 sqft multi-disciplinary facility is located in the heart of downtown Denver and will house classes, labs, and local companies.  PADT was there to not only celebrate the whole facility, but we were especially excited about the new 3D Printing lab that is being funded by a $1 million gift from Lockheed Martin.  A nice new Stratasys Fortus 900 is the centerpiece of the facility.  It will be a while before the lab itself is done, so watch for an invite to the grand opening.  While we wait we are working with MSU, Lockheed Martin, Stratasys, and others to put a plan together to develop the curriculum for future classes and making sure that the engineers needed for this technology are available for the expected explosion of use of this technology.

Stratasys and PADT are proud to be partners of this fantastic effort along with many key companies in Colorado.  If you want to learn more about how we can help you build partnerships between industry and academia, please reach out to info@padtinc.com or give us a call.

Phoenix:  2017 Aerospace, Aviation, Defense + Manufacturing Conference

The 113f high in Phoenix really didn’t stop anyone from coming to the AADM conference. This annual event was at ASU SkySong in Phoenix and is sponsored by the AZ Tech Council, AZ Commerce Authority, and RevAZ.  PADT was proud to not only be a sponsor, but also have a booth, participate in the advanced manufacturing panel discussion, and do a short partner presentation about what we do for our Aerospace and Defense Customers.

Here is Rob’s presentation on PADT:

PADT-AeroConf-AZTC-2017

We had great conversations at our booth with existing customers, partners, and a few people that were new to us.  This is always one of the best events of the summer, and we look forward to next year.

If you want to know more about how PADT can help you in your Aerospace, Defense, and Manufacturing efforts, reach out and contact us.

ANSYS Startup Roadshow – November 18th, Phoenix AZ

Phoenix!

The Co-Owner of PADT, Inc. Eric Miller will be at The Gateway Center for Entrepreneurial Innovation (CEI) this Friday, November 18th, from 12-1pm to discuss how ANSYS software is helping new entrepreneurs drive success through simulation.

This is a free event, and while registration is not required it is preferred.

The presentation will include a discussion on:

  • What simulation is and how it can be applied to product development

  • How partnering with PADT and ANSYS can be crucial to the success of a startup
  • How using ANSYS software will help deliver ideas to market more rapidly and cost effectively. Thus saving money, time, and increasing the probability of success.

Click Here for directions and additional registration information.

Eric will also be presenting information on the ANSYS Startup Program, which provides entrepreneurs with access to various ANSYS multiphysics simulation products bundled and priced specifically for early stage startup companies.

Acceptance to this program is limited to companies who are not current ANSYS customers and meet a variety of qualifications.

Those who are eligible will also receive access to the ANSYS Customer Portal for marketing opportunities and customer support.

Visit Padtinc.com/ANSYS_Startup to see if you qualify for this program, or Click Here to register to attend the startup presentation on November 18th.

We look forward to seeing you there

AmCon Phoenix 2015: Comments and Presentation Notes

prezo_padt_amcon_phoenix-2015We just finished up our third and final AmCon show of the year at what turned out to be the best show of the three.  The PADT booth was packed during the exhibition time with a wide variety of people asking questions and checking out examples of what PADT and Stratasys can do.  We were able to meet with a lot of our local customers, and even better, were able to get to know a ton of new potential clients.  Some shows are kind of boring and people just don’t get what we do. AmCon shows are the exact opposite. The attendees are smart, informed, and eager to learn more.

As is usual, we had a collection of parts on display. We also had a Geomagic Capture scanner showing off our growing offering of optical scanning solutions.  Here is a picture of Mario at the show.  He definitely photographs the best:

mario_padt_amcon_phoenix-2015In addition to the booth, we were asked to speak on 3D Printing at the event.  Yours truly gave a presentation entitled: “The Practical Application of 3D Printing for Prototyping, Tooling, and Production” that lasted a bit over an hour.

As promised the notes from that presentation can be downloaded here.

We hope to see more of you at future events. If you have questions about 3D Printing and its application please don’t hesitate to contact us.

 

Come See PADT at a Conference Near You.

padt-on-the-road-iconSometimes you get that prefect storm where everything happens at once, and these last weeks of May and first weeks of June are shaping up to be our busiest time for conferences and shows this year.  We are going to be all over the place: Newfoundland, Montreal, Long Beach, Houston, and even Phoenix.

So I thought I’d shoot out this quick note just in case some of you who follow this blog are going to be at any of these events. Please make sure you stop by and say hello:

  • May 19-21, 2015:  RAPID Show – Long Beach, California
    We will have a booth and will be talking about 3D Printing as well as Simulation and Design.
  • May 31-June 6, 2015:  ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering (OMAE) – St John’s, Newfoundland, Canada
    Clinton Smith will be presenting a paper with ANSYS, Inc.  on a mesh refinement study we did for a customer on an offshore platform with ANSYS FLUENT
  • June 2-3, 2015: AmCon Phoenix – A Design & Contract Manufacturing Expo – Phoenix, AZ
    This will be our third AmCon this year, this time in our home territory.  The 3D Printing and product development team will be in a booth and I will be doing a talk on “The Practical Application of 3D Printing for Prototyping, Tooling, and Production”
  • June 9, 2015: ANSYS Convergence – Houston, TX
    Clinton Smith will be manning our booth at this event and available to talk about all that PADT does.
  • June 15-19, 2015: ASME Turbo Expo (IGTI) – Montreal Quebec, Canada
    We will just attending this conference, hanging in the Flownex booth, and can probably be found around the ANSYS booth as well.

And don’t forget our Lunch and Learn Road Show: Dealing with Scanned, Repaired, and Legacy Geometry for 3D Printing

Press Release: Grand Opening of 3D Printing and Design Resource for Start-Up Companies in Phoenix

 PADT_StartUpLabs-1

The Phoenix area startup community gathered last night at the Center for Entrepreneurial Innovation to celebrate the grand opening of PADT's StartUpLabs. It was a bit warm for April but around 120 people made it out to the Gateway Community College campus to tour the facility, enjoy some food and beverage, and to hear a few words from representatives from a collection of three and four letter acronyms: CEI, PADT, the ACA, ATI, and PCC*. PADT StartUpLabs is a facility at CEI focused on delivering 3D Printing and Design services to early stage startups, rounding out the already excellent offerings at CEI including business planning, leadership training, marketing, and legal services. 

It was an opportunity for those who came to tour the facilities and network with others in the startup community including investors, inventors, entrepreneurs, professional service providers, and some students.  You can read the press release below or download a PDF here. In addition we enjoyed entertainment from Rachel Lydia Ellis and Colten Reece Hood and demonstration from Falcon Robotics of their latest robot that featured an amazing vision system.  

If you would like to learn more about PADT StartUpLabs, please visit the website: www.padtinc.com/startup or contact us at 480.813.4884.  

Here are some images from the event:

PADT-StartUpLabs-CEI-Grand-opening-5
Jeff Saville, Executive Director of CEI Shares his thoughts. 
PADT-StartUpLabs-CEI-Grand-opening-3
The PADT Medical Mascot watches over the display booths
PADT-StartUpLabs-CEI-Grand-opening-4
The displays in the lab are ready to go and are a great example of the marketing help CEI offers their clients. 
PADT-StartUpLabs-CEI-Grand-opening-1
A steady stream of visitors toured the new lab.
PADT-StartUpLabs-CEI-Grand-opening-2
Attendees escape the heat and network in the main hallway at CEI.
PADT-StartUpLabs-CEI-Grand-opening-6
Falcon Robotics, a great example of the future of technology and entrepreneurship. 
PADT-StartUpLabs-CEI-Grand-opening-7
MedicoLabs is a maker space for medical device development and is collocated in PADT StartUpLabs.  
PADT-StartUpLabs-CEI-Grand-opening-8
Rachel and Colten entertain the crowd with great voices.
 

Press Release:

Grand Opening of 3D Printing and Design Resource for Start-Up Companies in Phoenix

PADT and CEI officially open StartUpLabs to provide 3D Printing and design services to high-tech startups. StartupLabs focuses on helping early stage companies meet their product development and prototyping needs in a timely, efficient, and cost effect way through 3D Printing, Mentoring, and Design Services.

Tempe, AZ – April 20, 2015 – Phoenix Analysis & Design Technologies, Inc. (PADT), the Southwest’s largest provider of simulation, product development, and 3D Printing services and products, is pleased to announce the grand opening of StartUpLabs, a joint effort with the Center for Entrepreneurial Innovation (CEI). Located in CEI’s Phoenix, Arizona facility, the lab features state-of-the-art Additive Manufacturing (3D Printing) systems from Stratasys, leading Computer Aided Design (CAD) tools, and the equipment and space to provide needed services to early stage companies developing physical products.

The official Grand Opening for StartUpLabs was held at CEI on April 20th, 2015 from 3:00 to 7:00 PM. However, CEI clients have been utilizing the lab since the beginning of the year, with great success.

“We were approached in 2014 by CEI to help them build up a 3D Printing capability” noted Eric Miller, one of PADT’s owners. “As we worked together both sides saw the need for something more than a room full of printers, and PADT StartUpLabs was born. The experience has been fantastic for everyone involved and we feel we are well on the way to providing affordable access to these services that are critical to new product companies.”

The mission for StartUpLabs is simple:

Establish an additive manufacturing and product development lab within CEI to provide the Arizona physical product startup community with high quality 3D Printing and Design resources at an accessible price. 

What makes this lab unique is a combination of a fantastic facility, leading-edge equipment, entrepreneurs that are part of a well-managed program, and experienced engineers to guide the use of the resources being made available. In addition, both CEI and PADT have a particular focus on Medical Device related product development, bringing the experience of both teams to play for this critical and growing part of the Arizona startup community.

“Our mission at CEI is to provide commercialization assistance for job-creating technology entrepreneurs in the Phoenix area,” said Jeff Saville, CEI Executive Director. “PADT, with its product development expertise and specific medical device specialties, fills a major role for us in support of our client companies and their growth.”

At this time, only CEI Clients have access to discounted services at the lab. Over time the goal is to expand the services offered, furthering the contribution that both PADT and CEI make to the high-tech ecosystem in the state. In addition, PADT uses the impressive facilities at CEI as a central location for meetings with customers and as a location to hold meetings, seminars, and training sessions. 

To learn more about the StartUpLabs, visit http://www.padtinc.com/startuplabs or contact PADT at 480.813.4884 or CEI at 602.286.8950. 

About Phoenix Analysis and Design Technologies

Phoenix Analysis and Design Technologies, Inc. (PADT) is an engineering product and services company that focuses on helping customers who develop physical products by providing Numerical Simulation, Product Development, and Rapid Prototyping solutions. PADT’s worldwide reputation for technical excellence and experienced staff is based on its proven record of building long term win-win partnerships with vendors and customers. Since its establishment in 1994, companies have relied on PADT because “We Make Innovation Work. “  With over 75 employees, PADT services customers from its headquarters at the Arizona State University Research Park in Tempe, Arizona, and from offices in Littleton, Colorado, Albuquerque, New Mexico, and Murray, Utah, as well as through staff members located around the country. More information on PADT can be found at http://www.PADTINC.com.

About CEI
A division of the Maricopa Corporate College, the Center for Entrepreneurial Innovation (CEI) is a community-based business incubator located on the campus of GateWay Community College in the heart of Discovery Triangle. With funding from the US Economic Development Administration, City of Phoenix, and Maricopa Community College District, CEI provides targeted business services and proactive business support to create a systemic link between technology development, compelling markets, and opportunities; entrepreneurial and managerial talent development; early stage capital sourcing; and education and training, interns, coaching and business counseling. For more about CEI, visit http://www.ceigateway.com.  

* The acronyms translate to:
CEI: Center for Entrepreneurial Innovation
PADT: Phoenix Analysis & Design Technologies
ACA: Arizona commerce Authority
ATI: Arizona Technology Investors
PCC:Phoenix City Council… OK, that one is a stretch to make the joke work.

PADT Presented with 2012 IEEE Phoenix Section Small Company of the Year Award

PADT IEEE Small Company AwardPADT is very honored to have received the “Small Company of the Year Technical Contributions Award” from the Phoenix Section of the Institute of Electrical and Electronics Engineers (IEEE) at their annual award banquet held on February 9th, 2013. 

Quoting the award, it was given: “In Recognition of Developing Outstanding Engineering Services and Technologies for Companies Throughout the Southwest.”  It was a very special honor to receive this particular award because it is recognition from the local electronics business community, an important part of PADT’s customer base. As a company focused on providing products and services to customers that develop physical products, what most people consider mechanical engineering, being thanked for our contributions by a group of very hard core electrical engineers was truly touching.

Phoenix IEEE 2013 Awards BanquetThe awards banquet was well attended, there are a lot of electrical engineers in Phoenix.  Seven of PADT’s staff were able to attend, including three of the four owners.  The networking before the dinner was an enjoyable time and we were able to talk with many customers and managers of groups that we have serviced for a long time, many for over 15 years.  Some were even customers back in 1994 or 1995 when the company was just starting out.

Phoenix IEEE 2013 Awards Banquet Program

PADT IEEE Small Company AwardIt is always a privilege to be listed with other companies who are so successful and well known.  Being a co-sponsor with Freescale, Intel, and On Semiconductor, who are all also customers, was icing on the evening’s cake. 

 

 

PADT Award ShelfIt might be time to start looking for another shelf in the lobby for awards.  We placed this one between our Governor’s Celebration of Innovation and ASU Innovation Awards.  The shelves are getting so crowded that I had to move my FDM Kachina models to another shelf!

In all seriousness, we truly do appreciate the recognition that these awards signify.  They are acknowledgement from our peers and the community that what we do here at PADT is different, that by doing a good job at something you really enjoy doing, you can make a difference. 

There was time during the ceremony for a short acceptance speech. We missed filming the beginning which basically said “Thank you very much, this is an truly an honor, coming from a group made up of Electrical Engineers to a company that provides Mechanical Engineering products and services.  Most of you here are customers of PADT, and what we…” 

Here is the bulk of it: