Hey, did you know that you can access predefined views in both ANSYS Mechanical and DesignModeler using your numeric keypad? You can! Assuming the front view is looking down the +Z-axis at the X-Y plane, here are the various views you can access via your numeric keypad.
For this to work, make sure you’ve clicked within the graphics window itself—not on the top window bar, or one of the tool bars, but right in the region where the model is displayed. You may need to turn off Num Lock, though it works for me on both my laptop and desktop with Num Lock on or off.
With that out of the way, here are the views:
0) Isometric view, a bit more zoomed in than the standard auto-fit isometric view. This is my preferred level of zoom while still being able to see the whole model, to be honest.
1) Front view (looking down the +Z-axis)
2) Bottom view (looking down the -Y-axis)
3) Right view (looking down the +X-axis)
4) Back up to the previous view
5) Isometric view, standard autofit (I don’t like the standard auto-fit—too much empty space. I prefer the keypad 0 level of zoom.)
6) Go forward to the next view in the cache
7) Left view (looking down the -X-axis)
8) Top view (looking down the +Y-axis)
9) Back view (looking down the -Z-axis)
Here’s a handy-dandy chart you can print out to refer to when using the numeric keypad to change views in Mechanical or DesignModeler. Share it with your friends.