ANSYS 16.0 License Manager – New Look and Feel, New Capabilities

Categories:

ansys-license-manager-160-tn If your role includes administering ANSYS licenses, you should be aware that the look and feel of the ANSYS license manager has changed somewhat at version 16.0.  The tasks that used to all be performed within the Server ANSLIC_ADMIN Utility have now been split pretty much between that tool and a new tool that runs within your browser called the ANSYS License Management Center.

The ANSYS License Management Center looks like this:

ansys-license-manager-160-f1

This new License Management Center window is opened on Windows via Start > All Programs > ANSYS, Inc. License Manager > ANSYS License Management Center, and on Linux via /ansys_inc/shared_files/licensing/start_lmcenter.

This utility is where you now install license files, start and start the license manager, and also gather diagnostic information if something goes wrong.  You can also view the license .log files here as well as ANSYS licensing documentation.

The ‘old’ Server ANSLIC_ADMIN Utility is now smaller and does less than it did in prior versions.  This is what it looks like at version 16.0:

ansys-license-manager-160-f2

This window is still useful in that you can click on View Status/Diagnostic Options to get information you can’t get in the new License Management Center, primarily Display the License Status to see what licenses are in use and are available.  This information is also available to clients via the Client ANSLIC_ADMIN Utility.  You can start the ANSYS License Management Center from here too.

One capability you won’t find in either utility is the ability to Reread the License Manager settings.  When you load a new license file, the License Management Center now automatically stops and starts the license manager so you shouldn’t have to do a reread after installing a new file, but just in case, it can still be done via the command line using these instructions:

On Windows, open a command prompt and move to:

C:\Program Files\ANSYS Inc\Shared Files\Licensing\winx64

Then issue the command:

ansysli_server –k reread

The same command works on Linux from the /ansys_inc/shared_files/licensing/linx64 directory.

Another important change is the location of the license files after they have been installed.  The new location is (on Windows):

C:\Program Files\Ansys Inc\Shared Files\Licensing\license_files

This means there is a new sub-folder named license_files that contains the license file(s).  File(s) is now plural since you can have both an ANSYS license file and an Ansoft license file in that folder, both running using the ANSYS License Management Center.  There is a new license file naming convention as well:

ANSYS License file name:  ansyslmd.lic

ANSOFT License file name:  ansoftd.lic

The path on Linux is:

 /ansys_inc/shared_files/licensing/license_files

When you install an ANSOFT license file, the license manager now does some edits to change the daemon to the ANSYS daemon in addition to renaming the file and placing it in the new location. 

One additional piece of information:  The license manager reads any .lic files that are located in the license_files folder, so it’s probably a good idea to ensure that only ‘good’ versions of ansyslmd.lic and ansoftd.lic reside in that folder. 

A major conclusion that can be drawn from all of this is that ANSYS license manager and Ansoft license manager license files can now be managed using a single licensing tool and single set of licensing software.  We’ve been waiting for this for some time and it’s nice to see it’s here and working successfully.

 

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

03/28/2024

SAF Blue Carpet Event

03/28/2024

2024 Arizona Space Summit

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/03/2024

Stratasys F3300: Game Changing Throughput - Webinar

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/22/2024

Experience Stratasys Truck Tour: Houston, TX

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

04/24/2024

Experience Stratasys Truck Tour: Houston, TX

05/07/2024

Experience Stratasys Truck Tour: Albuquerque, NM

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/09/2024

Experience Stratasys Truck Tour: Los Alamos, NM

05/14/2024

Simulation World 2024

05/15/2024

Simulation World 2024

05/16/2024

Simulation World 2024

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: