/HBC: One of Those Little Known Commands

Categories:

The other day we received a tech support call requesting a way to remove the space between the element faces on a pressure plot.  He wanted this so that he could get a contour plot without seeing the contours of the elements on the back side of the part. So I built my trusty test block and applied a pressure. By turning on the pressure load symbols with  the /PSF command, also under PlotCrtls > Symbols, you can get plots like this.

image

Face Outlines (/PSF,1,1)

 

image

Arrows (/PSF,1,2)

 

image

Contours (/PSF,1,3)

Of course the customer was using this last contour plot option, but as you can see below, if you have pressure on both sides of the model, then the backside pressures show through the gaps. The plot can get a bit confusing. So after some digging, starting with the /PSF command, and not finding any reference on how to change the plot behavior, I asked around if anyone else had a way to do it, other than my first inclination which was to write a macro. So as I reverted to creating a macro, to do what should be a simple task, I thought, “No, there HAS to be an easier way.” Of course there is.

image

The one thing I’ve learned over the years… Well, yes, I’ve learned more than ONE thing, but I’m trying to make a point here… The one thing I’ve learned over the years, is that no matter how much I learn, there is always someone who know more than me.  So I asked Sheldon! (Not the Sheldon on Big Bang Theory; ANSYS, Inc’s very own Sheldon Imaoka.) I thought, “Surely he will know some undocumented command to save me time.  It took him all of three minutes to get back to me with the /HBC command. It is a fully documented, but seldom used, command that is hidden in the recesses of the Command Reference that determines how boundary condition symbols are displayed. When turned on, it will “use an improved pressure contour display.” So you go from the picture on the top, to the picture on the bottom.

image image

So I learned two new things. One is the /HBC command can give you nicer looking plots. The other, and even more useful thing, is to click the links on the help page at the upper right corner.

image

For if I did, I would have found the /HBC command on my own.

image

It looks like I need to sit down with a nice cup of hot chocolate* and the Command Reference and just scan the listing for commands that I don’t recognize and learn what they do.  Oh, what I go through for you people. Well, I’ll just make sure that it’s really good hot chocolate*.   I’ll write a new post from time to time on cool commands I find useful.

Have a great day!!!

*It’s 85 degrees here this week and I really meant iced tea, but I didn’t want to rub it in. Smile

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

03/28/2024

SAF Blue Carpet Event

03/28/2024

2024 Arizona Space Summit

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/03/2024

Stratasys F3300: Game Changing Throughput - Webinar

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/22/2024

Experience Stratasys Truck Tour: Houston, TX

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

04/24/2024

Experience Stratasys Truck Tour: Houston, TX

05/07/2024

Experience Stratasys Truck Tour: Albuquerque, NM

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/09/2024

Experience Stratasys Truck Tour: Los Alamos, NM

05/14/2024

Simulation World 2024

05/15/2024

Simulation World 2024

05/16/2024

Simulation World 2024

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: