How To Update The Firmware Of An Intel® Solid-State Drive DC P3600

Categories:

How To Update The Firmware Of An Intel® Solid-State Drive DC P3600 in four easy steps!

The Dr. says to keep that firmware fresh! so in this How To blog post I illustrate to you how to verify and/or update the firmware on a 1.2TB  Intel® Solid-State Drive DC 3600 Series NVMe MLC card.

CUBE Workstation Specifications – The Tester

PADT, Inc. – CUBE w32i Numerical Simulation Workstation

  • 2 x 16c @2.6GHz/ea. (INTEL XEON e5-2697A V4 CPU), 40M Cache, 9.6GT, 145 Watt/each
  • Dual Socket Super Micro X10DAi motherboard
  • 8 x 32GB DDR4-2400MHz ECC REG DIMM
  • 1 x NVIDIA QUADRO M2000 – 4GB GDDR5
  • 1 x  Intel® DC P3600 1.2TB, NVMe PCIe 3.0, MLC AIC 20nm
  • Windows 7 Ultimate Edition 64-bit

Step 1: Prepping

Check for and download the latest downloads for the Intel® Solid-State DC 3600 here: https://downloadcenter.intel.com/product/81000/Intel-SSD-DC-P3600-Series

You will need the latest downloads of the:

Intel® SSD Data Center Family for NVMe Drivers
  • Intel® Solid State Drive Toolbox

  • Intel® SSD Data Center Tool

  • Intel® SSD Data Center Family for NVMe Drivers

Step 2: Installation

After instaling, the Intel® Solid State Drive Toolbox and the Intel® SSD Data Center Tool reboot the workstation and move on to the next step.

INTEL SSD Toolbox
INTEL SSD Toolbox

INTEL SSD Toolbox Install

Step 3: Trust But Verify

Check the status of the 1.2TB NVMe card by running the INTEL SSD DATA Center Tool. Next, I will be using the Windows 7 Ultimate 64-bit version for the operating system. Running the INTEL DATA CENTER TOOLS  within an elevated command line prompt.

Right-Click –> Run As…Administrator
Command Line Text: isdct show –intelssd

INTEL DATA Center Command Line Tool
INTEL DATA Center Command Line Tool

As the image indicates below the firmware for this 1.2TB NVMe card is happy and it’s firmware is up to date! Yay!

If you have more than one SSD take note of the Drive Number.

  • Pro Tip – In this example the INTEL DC P3600 is Drive number zero. You can gather this information from the output syntax. –> Index : 0

Below is what the command line output text looks like while the firmware process is running.

C:\isdct >isdct.exe load –intelssd 0 WARNING! You have selected to update the drives firmware! Proceed with the update? (Y|N): y Updating firmware…The selected Intel SSD contains current firmware as of this tool release.
isdct.exe load –intelssd 0 WARNING! You have selected to update the drives firmware! Proceed with the update? (Y|N): n Canceled.
isdct.exe load –f –intelssd 0 Updating firmware… The selected Intel SSD contains current firmware as of this tool release.
isdct.exe load –intelssd 0 WARNING! You have selected to update the drives firmware! Proceed with the update? (Y|N): y Updating firmware… Firmware update successful.

Step 4: Reboot Workstation

The firmware update process has been completed.

shutdown /n

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/03/2024

Stratasys F3300: Game Changing Throughput - Webinar

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/22/2024

Experience Stratasys Truck Tour: Houston, TX

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

04/24/2024

Experience Stratasys Truck Tour: Houston, TX

05/07/2024

Experience Stratasys Truck Tour: Albuquerque, NM

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/09/2024

Experience Stratasys Truck Tour: Los Alamos, NM

05/14/2024

Simulation World 2024

05/15/2024

Simulation World 2024

05/16/2024

Simulation World 2024

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: