Importing Material Properties from Solidworks into ANSYS Mechanical…Finally!

Finally! One of the most common questions we get from our customers who use Solidworks is “Why can’t I transfer my materials from Solidworks? I have to type in the values all over again every time.”  Unfortunately, until now, ANSYS has not been able to access the Solidworks material library to access that information.

There is great news with ANSYS 18.  ANSYS is now able to import the material properties from Solidworks and use them in an analysis within Workbench.  Let’s see how it works.

I have a Solidworks assembly that I downloaded from Grabcad.  The creator had pre-defined all the materials for this model as you can see below.

Once you bring in the geometry into Workbench, just ensure that the Material Properties item is checked under the Geometry cell’s properties.  If you don’t see the panel, just right-click on the geometry cell and click on Properties.

Once you are in ANSYS Mechanical, for example you will see that the parts are already pre-defined with the material specified in Solidworks .

The trick now is to find out where this material is getting stored. If we go to Engineering Data, the only thing we will see is Structural Steel. However when we go to Engineering Data Sources that is where we see a new material library called CADMaterials.  That will show you a list of all the materials and their properties that were imported from a CAD tool such as Solidworks, Creo, NX, etc.

You can of course copy the material and store it for future use in ANSYS like any other material.  This will save you from having to manually define all the materials for a part or assembly from scratch within ANSYS.

Please let us know if you have any questions and we’ll be happy to answer them for you.