Named Selections + Object Generator = Awesome

Categories:

Guess who’s back…back again.  Yes, just like Slim Shady, I’m back (returned to PADT and writing Focus blogs).

ducreux guess who s back by kaka fail at art d34yjoz

So run and go tell your friends that horrible pop cultural references have returned to ANSYS blog posts.  It’s been too long.

Getting back on track, the object generator debuted in R14.5 Mechanical.  You can access this feature in the toolbar (image below taken from R15):

How the pro's generate objects

What exactly does the object generator do?  Simple answer…it makes your life better.  It uses named selections and a single instance of an object (joint, spring, bolt pretension, etc) and replicates it across all entities in the named selection.  Let’s play around with this feature on the following (dummy) assembly:

image

Above is a t-pipe with three covers, one of them has bolt ‘bodies’ modeled.  We’ll use fixed-fixed joints to connect the two ‘bolt-less’ bodies together, and then define bolt preloads on the bolt pattern.  To get started, we need to build up the named selections. 

I’m planning on defining the fixed-fixed joint between the two cylindrical surfaces:

image

This is a pretty simple assembly, and I could easily just manually select them all, right-mouse-click, and generate the named selection.  In the real world, things aren’t always so easy, so we’ll get a little fancy.  First, create a named selection of the bodies that contain faces we want to joint together:

image

I’ve created two named selections, called ‘joint_cover’ and ‘joint_pipe’ and utilized the ‘random colors’ option to display them in different colors.  Next, I insert a named selection but set the scoping method to be ‘by worksheet’:

image

I’ll then use selection logic (MAPDL hipsters will recognize the logic as the xSEL commands):

image

Now, order is important here, as the selection logic ‘flows’ from top to bottom.  First, this named selection selects the bodies contained in the existing named selection ‘joint_cover’ (note:  this object MUST exist above the worksheet-created named selection in the tree).  At this point in time, we have two bodies selected.  Next, it converts my body selection to faces belonging to those bodies.  Finally, it filters out any face that has a radius less than .05m (units are set by the ‘units’ drop-down menu, values entered in worksheet scale when units are changed).  Hit ‘generate’ and you get the following:

image

You may need to switch to the ‘graphics’ tab (circled in red in the above image).  This is great, we now have all of our faces highlighted.  Next, we need to reproduce this behavior on the pipe.  Rather than redo all of this work, just right-mouse-click on our new named selection and select ‘duplicate’. 

image image

Select the duplicated named selection, and edit the first line to use a different named selection.  Hit generate:

image

Perfect.  We can go back and add/remove bodies to the existing named selections and re-generate the named selections to have it automatically re-create these named selections. 

Next, we’ll create the original ‘joint’ we want to re-create across the two flanges. 

image

After making the joint, make note of which part is the ‘reference’ and ‘mobile’.  For the image above, the cover is the ‘reference’ while the pipe is the ‘mobile’.  Highlight this joint and select the object generator:

image

If we use the object generator on a joint, it will ask us to define the named selections that contain the reference and mobile faces.  From above, we know that the cover faces are contained in the ‘cover_faces’ named selection.  We then duplicated that and swapped the body selection, meaning the faces for the pipe are contained in ‘cover_faces 2’ (I’m lazy and didn’t rename it…sorry).  Next, we define the minimum distance between centroids.  This acts as a filter for re-creating each joint.  What happens when we hit ‘generate’ is it looks at the distance between the centroids of each face in the two named selections.  If it finds ‘matching’ faces within that distance it creates the joint. 

image

In the image above, if I use a distance equal to the red line, I will get incorrect joints defined.  I’ll get the following (a=cover, b=pipe): 1a-1b, 1a-2b, 2a-2b, 2a-1b…

What I need to do is limit the distance to the blue line, which is big enough to find the correct pairs but filter out the wrong ones.  To figure out a proper distance, you can use the ‘selection information’ window to figure out the centroid information:

image

Once you’re set, hit ‘generate’:

image

What a time to be alive!  It’s always a good idea to go through joint-by-joint to make sure everything is correct…or you can always just count the number of joints created and confirm that the number is correct (I have 15 total faces in the cover_faces named selection…so I should have 15 joints…and I do).

Next, let’s look at the bolt pretension definition.  We start with a named selection of the face where the bolt pretension will be applied:

image

Next, we create our original bolt pretension load:

image

I’ve setup my bolt pretension to solve for a 100N axial load in load step 1 and then lock the solved-for relative displacement in for load step 2.  We select the bolt pretension in the tree, then select the object generator:

image

Select the named selection that contains the bolt faces, and hit generate:

image

This is incredibly useful for bolt pretension for two reasons.  The first reason is obvious…it significantly cuts down on the amount of work you need to do for large bolt patterns.  The second reason…you can only make changes to bolt pretension objects one at a time.  By that, I mean you cannot multi-select all your bolt pretensions and change the load and step behavior (e.g. change load to 200N, open in load step 2, etc). 

image

If you select all the bolt pretensions, the changes you make in the tabular data window are only applied to the first selected object.  All other bolt pretensions are kept the same.  So if you suddenly realize the pretension was setup incorrectly, it’s best to delete all but one of the pretension object, make the necessary changes, then duplicate it.  That way you can be sure all the bolt pretensions are correct (unless you’re simulating a bolt opening up…then ignore). 

One very important thing to note is that the object generator is not parametrically linked to anything.  If I go back and change the number of holes/bolts/etc in my model, I may need to re-generate the duplicated joints/bolts/etc.  The named selections should update just fine, assuming you didn’t open the hole up bigger than the selection tolerance.  I would recommend deleting all but the original joint/bolt pretension and just re-create everything after the CAD update (this may actually speed up the CAD transfer as it’s not trying to link up incorrect entity IDs).

Hopefully this will save you some time/frustration in your next analysis.  The documentation in R15 can be accessed here:  help/wb_sim/ds_object_generator.html

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

03/28/2024

SAF Blue Carpet Event

03/28/2024

2024 Arizona Space Summit

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/03/2024

Stratasys F3300: Game Changing Throughput - Webinar

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/22/2024

Experience Stratasys Truck Tour: Houston, TX

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

04/24/2024

Experience Stratasys Truck Tour: Houston, TX

05/07/2024

Experience Stratasys Truck Tour: Albuquerque, NM

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/09/2024

Experience Stratasys Truck Tour: Los Alamos, NM

05/14/2024

Simulation World 2024

05/15/2024

Simulation World 2024

05/16/2024

Simulation World 2024

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: