Efficient Engineering Data, Part 2: Setting Default Materials and Assignments aka No, You’re Not Stuck with Structural Steel for the Rest of Your Life

Longer ago than I care to admit, I wrote an article about creating and using your own material libraries in Workbench. This is the long awaited follow-up, which concerns setting the default Engineering Data materials and default material assignments in Mechanical and other analysis editors.

imageNote:
Part of the reason it’s taken me this long is that I moved to New Mexico to help staff PADT’s new office there, and to shadow Walter White. It has been a hectic, exhausting endeavor but I’m here and I’m finally settled in. If you’re in New Mexico and are interested in ANSYS, engineering services, product development, or rapid prototyping (e.g. 3D printing), please feel free to contact me.

In order to make the best use of the procedures here, you will probably want to know how to create your own material libraries. Part 1 describes how to do this. This will also work with the material libraries that come with the ANSYS installation, though.

Pick Favorites

The first step is to get into Engineering Data and expose the material libraries by clicking on the book stack button ( image ). Then, drag the materials of your choice from the appropriate library(ies) to the Favorites Data Source. These can include materials you want to have available in Mechanical by default as well as materials that you would like to consolidate into a single location for quick access. At this point, the default material availability and assignments have not been altered. These will be handled in the next couple of steps.

image

Drag and Drop Materials to Favorites

Set Default Material Availability

To specify which materials will be immediately available for assignment in future analyses, go to the Favorites Data Source and check all applicable materials in column D. Though not assigned to the immediate set of engineering data, these will be on the default list of available materials in subsequent analyses, i.e. when you create a new analysis in the same project schematic or when you exit and reopen Workbench.

image

Check to Add to Default List of Available Materials

image

Materials Immediately Available Inside Mechanical

Set Default Material Assignment

Now our most commonly used materials are immediately available in our analysis editor. But Structural Steel still lingers. In many, if not most, cases, we would prefer our default assignment to be something else.

The fix is easy. Once again, go to the Favorites Data Source, right click the material you wish to have as your default material, and select Default Solid Material (and if you’re doing Emag or CFD, you can set your default fluid or field material with the right-click menu too). Your default solid material will now replace Structural Steel in subsequent analyses.

image

Example: Aluminum 6061-T651 Set as Default Material Assignment

image

Becomes Default Material Assignment in Analysis

Note that you can stop at any step in this process. If you want to consolidate favorite materials, but don’t want to have them immediately in your analysis editor, you can do that. If you want a default list of materials to select from without specifying a default material assignment, you can do that too. More than likely, though, you’ll want to do all three.