Top 10 New Thermal Fluid Modeling Capabilities in Flownex 2014

Categories: , ,

3D graph We are pleased to announce the release of Flownex SE 2014.  This is a very exciting release for all of us involved in Flownex because it introduces a mix of advanced features and usability enhancements – we love better and easier.  We will be publishing more information about this release, as well as videos and webinars. While we set all of that up, we wanted to whet everyone’s appetite and give you a list of what we feel are the 10 most important enhancements.

  1. Rotating components, Swirl Boundary, and General Turbine and Compressor Models 
    A new library has been added which models rotating flow on a system level. Focusing on secondary flow and heat transfer in turbine engines, it includes all the components needed including compressors, turbines, seals, gaps, nozzles, and cavities. A complete library for Steam Turbine modeling was also added. 
  2. Importing and Geometries
    Users can read in 2D and 3D layout files in common formats and directly create Flownex models from the geometry. The model and results can then be visualized with the 3D geometry.
  3. GIS File Support
    When modeling systems that cover a large area, such as water or gas pipelines, the geographical data can be imported for display and to automatically include altitude into the model. 
  4. Connections to ANSYS Products
    Users can import 3D Pipe geometry as an ANF file, and connect to ANSYS Mechanical and ANSYS Fluent for co-simulation.
  5. Link to Mathcad
    Users can transfer parametric data to and from Mathcad worksheets
  6. Graphical Script Generation Tool
    Users can use Quick Script to create complex scripts to customize their processes or models without having to learn the full scripting language
  7. New Designer Tools to Quickly Model Common Systems.
    Designer tools atomically iterate on a user’s model to calculate unknown values for them. This release includes tools for calculating mass flow when only pressure is known at a boundary, automatically calculating steady state conditions in a two-phase tank, and a component designer that calculates input parameters for common components so that those components deliver the users requested mass flow.
  8. Five Additional Convection Models 
    Based on user input, five new models were added to the Dittus-Boelter correlation for calculating heat transfer coefficients: tube, shell-side single phase, shell-side horizontal tube condensation, ribbed wall channel, and channel with pedestals. 
  9. Exit Thrust Nozzle Added
    New model in subsonic and supersonic flow at the outlet of a flow network with gasses and superheated fluids
  10. Additional Enhancements:
    Support for miter bends in piping
    3D graphs
    Radiation supports multiple surface enclosures
    The range of methane two phase fluid was increased
    Support for 64 bit 
    Several more values can be changed during a transient solution

The best way to learn more about these additions, or anything about Flownex, is to contact Roy Haynie at roy.haynie@padtinc.com or 480-813-4884.  
There is also some more detailed material here:

 

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

03/28/2024

SAF Blue Carpet Event

03/28/2024

2024 Arizona Space Summit

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/03/2024

Stratasys F3300: Game Changing Throughput - Webinar

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/22/2024

Experience Stratasys Truck Tour: Houston, TX

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

04/24/2024

Experience Stratasys Truck Tour: Houston, TX

05/07/2024

Experience Stratasys Truck Tour: Albuquerque, NM

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/09/2024

Experience Stratasys Truck Tour: Los Alamos, NM

05/14/2024

Simulation World 2024

05/15/2024

Simulation World 2024

05/16/2024

Simulation World 2024

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: