3D Printing the 4th Dimension – GISHWHES 2015 Scavenger Hunt

padt-sundial-insun-apple-watch-w GISHWHES is a huge international scavenger hunt. Every year teams around the globe comb through the list of 215 tasks and pick as many as possible that their team can do.  Last year they introduced 3D Printing as a task, and we helped a team 3D Print a quill pen. That was a lot of fun, so when this year’s list included an item on 3D printing, we jumped at the chance to be involved.

The item was:

110: VIDEO. Use a cutting edge 3D printer to 3D print your representation of the 4th dimension.62 POINTS

Being engineers we said “4th Dimension?  Time.”  Then it became a choice between the way mass distorts the space-time continuum or some sort of clock’ish thing.  The distortion thing seemed difficult so we focused on a clock.  Being that we were constrained on budget and time we decided to do a sundial.

The result can be seen here in this YouTube video.

It was a fun project and the team spent a bit of time in the 112F sunshine trying it out.  We can’t wait to see what we will get to do for the 2016 scavenger hunt.

Making the Model

A couple of people have asked if we downloaded the solid model for the sundial or if we made it. We actually made it. After a little bit of research we found that making a simple horizontal sundial like this one is very easy. Here are the steps we took:

Get Geometry Values

So it turns out that the angle of each hour line is determined by the latitude of where the dial will go. The angle of the pointy thing, called a gnomon, is also the latitude.  So for Tempe, AZ that is 33.4294°.That gets applied to the equation:

angle(h) = arctan(sin(L*tan(15° · h))

h = integer of the hour, 6 am to 6 pm
L = latitude

I plopped that into Excel:

=ABS(DEGREES(ATAN(SIN(RADIANS($C$3))*TAN(RADIANS(15)*B7))))

and got the following:

Latitude 33.4294
Hour Angle
6 90.00
7 64.06
8 43.66
9 28.85
10 17.64
11 8.40
12 0.00

Build the Solid Model

The next step is to build the model. I used SolidEdge because I know it real well and was able to knock it out quickly.  But all CAD tools would be the same:

  1. Pick a center point.
  2. Add lines as rays from that using the angles in the table above for each hour.
  3. Design the shape of your sundial to look cool. I did a simple circle .
  4. Mark the hours using the sketch. I raised up thin rectangles.
  5. Model the gnomon using the latitude as the angle.  Make this as fancy or simple as you want.
  6. Add whatever doo-dads you want.
  7. Label the hours if you want.
  8. Save to STL

Here is what my sketch looked like:PADT-sundial-cad-model-hour-sketc

And the final solid model looked like this:

PADT-sundial-cad-model We sent this to the printer as shown in the video, and got a sundial.

 

 

 

 

 

 

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

03/28/2024

SAF Blue Carpet Event

03/28/2024

2024 Arizona Space Summit

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/03/2024

Stratasys F3300: Game Changing Throughput - Webinar

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/22/2024

Experience Stratasys Truck Tour: Houston, TX

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

04/24/2024

Experience Stratasys Truck Tour: Houston, TX

05/07/2024

Experience Stratasys Truck Tour: Albuquerque, NM

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/09/2024

Experience Stratasys Truck Tour: Los Alamos, NM

05/14/2024

Simulation World 2024

05/15/2024

Simulation World 2024

05/16/2024

Simulation World 2024

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: