Legacy Training Material: Tcl/Tk for ANSYS Mechanical APDL

Categories:

The Graphical User Interface (GUI) for ANSYS Mechanical APDL is written in a toolset called Tcl/Tk. This is actually the same GUI toolset that ICEM CFD uses.  Way back in the days when dinosaurs roamed the earth and the .com bubble was bursting, PADT wrote an Advanced Customization class for what was then just called ANSYS.  We still use a large portion of that class today, but one area that has really been mothballed is the chapter on Tcl/Tk.

But some users may find some value there so we present it here, in its un-edited and un-verified totality as a resource for the community.

Use it with success, but at your own risk.

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

12/06/2023

Optics Updates in Ansys 2023 R2 - Webinar

12/07/2023

Stratafest 2023 - Houston, TX

12/13/2023

AZ Tech Council Tech The Halls 2023

01/24/2024

Arizona Photonics Days 2024

01/25/2024

Arizona Photonics Days 2024

01/26/2024

Arizona Photonics Days 2024

02/06/2024

IME West 2024

02/07/2024

IME West 2024

02/08/2024

IME West 2024

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: