From Piles to Power – My First PADT PC Build

By: Ahmed Fayed
– November 25, 2014
Categories:
Tags: , , ,

Welcome to the PADT IT Department now build your own PC

[Editors Note: Ahmed has been here a lot longer than 2 weeks, but we have been keeping him busy so he is just now finding the time to publish this. ]

I have been working for PADT for a little over 2 weeks now. After taking the ceremonial office tour that left me with a fine white powder all over my shoes (it’s a PADT Inc special treat). I was taken to meet my team, David Mastel – My Boss for short, who is the IT commander & chief at PADT Inc. and Sam Goff – the all-knowing systems administrator.

I was shown to a cubicle that reminded me of the shady computer “recycling” outfits you’d see on a news report highlighting the vast amounts of abandoned hardware; except there were no CRT (tube) screens or little children working as slave labor.
aa1

Sacred Tradition

This tradition started with Sam, then Manny, and now it was my turn taking this rite of passage. As part of the PADT IT department, I am required by sacred tradition to build my own desktop with my bare hands – then I was handed a screwdriver.

My background is mixed and diverse but mostly has one thing in common. We usually depended on pre-built servers, systems and packages. Branded machines have an embedded promise of reliability, support and superiority over the custom built machines.

  1. What most people don’t know about branded machines is that they carry two pretty heavy tariffs.
  2. First, you are paying upfront for the support structure, development, R&D, supply chains that are required to pump out thousands of machines.
  3. Second, because these large companies are trying to maximize their margins, they will look for a proprietary cost effective configuration that will:
    1. Most probably fail or become obsolete as close as possible to the 3-year “expected” life-span of computers.
    2. Lock users into buying any subsequent upgrade or spare part from them.

Long Story short, the last time I fully built a desktop computer was back in college when a 2GB hard disk was a technological breakthrough that we could only imagine how many MP3’s we could store on it.

The Build

There were two computer cases on the ground, one resembled a 1990 Mercury Sable that was at most tolerable as a new car and the other looked more like 1990 BMW 325ci a little old but carries a heritage and potential to be great once again.
aa2

So with my obvious choice for a case I began to collect parts from the different bins and drawers and I was immediately shocked at how “organized” this room really was. So I picked up the following:

There are a few things that I would have chosen differently but were not available at the time of the build or were ridiculous for a work desktop would be:

  • Replaced 2 drives with SSD disks to hold OS and applications
  • Explored a more powerful Nvidia card (not really required but desired)

So after a couple of hours of fidgeting and checking manuals this is what the build looks like.
aa3

(The case above was the first prototype ANSYS Numerical Simulation workstation in 2010. It has a special place in David’s Heart)

Now to the Good STUFF! – Benchmarking the rebuilt CUBE prototype

ANSYS R15.0.7 FEA Benchmarks

Below are the results for the v15sp5 benchmark running distributed parallel on 4-Cores.
aa4

ANSYS R15.0.7 CFD Benchmarks

Below are the results for the aircraft_2m benchmark using parallel processing on 4-Cores.
aa5

This machine is a really cool sleeper computer that is more than capable at whatever I throw at it.

The only thing that worries me is that when Sam handed me the case to get started, David was trying –but failed- to hide a smile that makes me feel that there is something obviously wrong in my first build and I failed to catch it. I guess I will just wait and see.

Categories

Certified Elite Channel Partner

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Product Development
Diamond Partner

Technical Expertise to Enable your Addictive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: Phoenix Analysis and Design Technologies, 7755 S. Research Dr., Tempe, AZ, 85284, https://www.padtinc.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Share on twitter
Share on facebook
Share on linkedin
Share on pinterest

Upcoming Events

05/26/2022

Modelling liquid cryogenic rocket engines in Flownex - Webinar

05/25/2022

SMR & Advanced Reactor 2022

05/25/2022

05/24/2022

SMR & Advanced Reactor 2022

05/19/2022

RAPID + tct 2022

05/19/2022

Venture Cafe Roundtable: AI & Healthcare

05/18/2022

Tucson after5 Tech Mixer: World View

05/18/2022

RAPID + tct 2022

More Info

05/18/2022

Signal & Power Integrity Updates in Ansys 2022 R1 - Webinar

05/18/2022

Simulation World 2022

05/17/2022

RAPID + tct 2022

05/11/2022

Experience Stratasys Manufacturing Virtual Event

05/04/2022

Mechanical Meshing Updates in Ansys 2022 R1 - Webinar

04/27/2022

04/22/2022

12TH ANNUAL TUCSON GOLF TOURNAMENT

04/21/2022

04/20/2022

Additional Fluids Updates in Ansys 2022 R1

04/20/2022

Experience Stratasys Tour – Tempe Arizona

04/18/2022

Experience Stratasys Tour - Flagstaff Arizona

04/14/2022

D&M West | MD&M West

04/13/2022

D&M West | MD&M West

04/13/2022

Experience Stratasys Tour - Albuquerque New Mexico

04/12/2022

D&M West | MD&M West

04/12/2022

Experience Stratasys Tour - Los Alamos New Mexico

04/12/2022

Optimizing Engineering Workflows f​​​​or Propulsion System Design

04/07/2022

Experience Stratasys Tour - Austin Texas

04/07/2022

37th Space Symposium - Arizona Space Industry

04/06/2022

Transforming Digital Engineering with Ansys Discovery 2022 R1

04/06/2022

37th Space Symposium - Arizona Space Industry

04/05/2022

37th Space Symposium - Arizona Space Industry

04/04/2022

37th Space Symposium - Arizona Space Industry

03/30/2022

Simulation Best Practices for Vehicle Engineering - Webinar

03/23/2022

03/23/2022

High & Low Frequency Electromagnetics Updates in Ansys 2022 R1

02/24/2022

Arizona Technology Council After 5 Tech Mixer "Pandemic Pivot Pizza Pa

02/23/2022

SciTech Festival: Spend an Hour with 3D Printing Experts

02/11/2022

Webinar: Mechanical overview for Ansys 2022 R1

More Info

02/09/2022

Webinar: Product Development 101 (FAKE)

02/08/2022

Webinar: Navigating the Additive Landscape

01/27/2022

Arizona Technology Council 1st Quarter VIP Tech Mixer

More Info

01/26/2022

Simulation Best Practices for Gas Turbine Design & Development - Webin

More Info

01/19/2022

Arizona Photonics Days

More Info

11/04/2021

ExperienceIT, New Mexico

More Info

11/03/2021

Additive Manufacturing & Structural Optimization in Ansys 2021 R2 - We

More Info

11/03/2021

Optics Valley Technical Series: The Future of Simulation in the Optics

More Info

11/02/2021

SBIR Liftoff AZTC Virtual Breakfast Series

More Info

10/10/2021

Stratasys Mobile Truck Stop - Tucson Arizona

More Info

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: