Manufacturing Open House Highlights – October 2015

padt-mfg-openhouse-2015-1 Here at PADT we help people who make products, stuff that gets manufactured.  So we focused our open house yesterday on advanced manufacturing and invited the community to come out and network, learn, and share.  Even though it was a busy week for technology events in Arizona, we had a great turnout on a surprisingly cloudy Wednesday evening.

October is Manufacturing month and this open house was part of the Arizona Commerce Authority’s coordinated events to highlight manufacturing in Arizona.   You can learn more about other events in the state here.

This event was a bit more casual and less structured then past PADT open houses, letting attendees spend more time one-on-one with various experts and dig deep in to technologies like metal 3D Printing, urethane casting, topological optimization, and scanning.

What struck all of us here was the keen interest in and knowledge about the various tools we were showing across a wide range of attendees.  From students with home built 3D Printers to managers from local aerospace companies that are on the forefront of Additive Manufacturing, the questions that were asks and comments that were made with insightful and show a transition of this technology from hype to real world application.

Below are some more quick snapshot taken during the event.

A big thanks to everyone who made it out and we hope to see more of you next time. If you have any questions about the application of advanced manufacturing technologies to your products, don’t hesitate to reach out to us at info@padtinc.com or 480.813.4884.  As always, visit www.PADTINC.com to learn more.

padt-mfg-openhouse-2015-2
PADT’s Dr. Dhruv Bhate explains the latest developments in metal Additive Manufacturing.

padt-mfg-openhouse-2015-3
PADT’s Director of Engineering, Rob Rowan, discusses how PADT Medical has helped companies turn their medical device ideas into products.
 

 

 

 

 

Ademola Falade, PADT's scanning expert, describes how blue light scanning has changed how we capture geometry of existing parts.
Ademola Falade, PADT’s scanning expert, describes how blue light scanning has changed how we capture geometry of existing parts.

PADT's Seminar Room was packed with people talking to PADT's expert engineering staff.
PADT’s Seminar Room was packed with people talking to PADT’s expert engineering staff.
 

 

IMG 1891
PADT’s 3D Printing Demo room was the place to hang and discuss different ways to use 3D Printing.
  
IMG 1890  

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter. Every month we share news about PADT, our partners, and our customers. We also share links to useful information on simulation, product development, and 3D Printing.  Sign up, and let's stay in touch.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

06/17/2024

TechConnect World Innovation Conference & Expo

06/18/2024

TechConnect World Innovation Conference & Expo

06/20/2024

Sky's Not the Limit: The Power of SAF 3D Printing for Aerospace

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/26/2024

Enabling 6G Technologies - Ansys Hosted Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/15/2024

Experience Stratasys Truck Tour: Salt Lake City, UT

07/18/2024

Stratafest - Denver, CO

08/05/2024

2024 CEO Leadership Retreat

09/09/2024

Turbine Engine Technology Symposium 2024

09/10/2024

New Mexico Tech Summit 2024

10/23/2024

PADT30 | Nerdtoberfest 2024

Search the PADT Site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: