Introducing the Stratasys V650 Flex – Stereolithography Upgraded

By: Trevor Rubinoff
– May 8, 2019

The result of over four years of testing, the Stratasys V650 Flex delivers high quality outputs unfailingly, time after time. More than 75,000 hours of collective run time have gone into the V650 Flex; producing more than 150,000 parts in its refinement.

Upgrade to the Stratasys V650 Flex 3D Stereolithography printer and you can add game-changing advances in speed, accuracy and reliability to the established capabilities of Stereolithography. Create smooth-surfaced prototypes, master patterns, large concept models and investment casting patterns more quickly and more precisely than ever.  

In partnership with DSM, Stratasys have configured, pre-qualified and fine-tuned a four-strong range of resins specifically to maximize the productivity, reliability and efficiency of the V650 Flex 3D printer. Create success with thermoplastic elastomers, polyethylene, polypropylene and ABS:

Next-generation stereolithography resins, ideal for investment casting patterns.

Stereolithography accuracy with the look, feel and performance of thermoplastic.

For applications needing strong, stiff, high-heat-resistant composites. Great detail resolution

A clear solution delivering ABS and PBT-like properties for stereolithography.

Thanks to reduced downtime and increased workflow, the Stratasys V650 Flex prints through short power outages, and if you ever need to re-start, you can pick up exactly where you left off. Years of testing have helped deliver not only the stamina to run and run, but also low maintenance needs and high efficiency. To make life even easier, the V650 Flex runs on 110V power, with no need to switch to a 220V power source.

For ease of use, every V650 Flex comes with a user-friendly, touch-enabled interface developed in parallel with SolidView build preparation software. This software contains smart power controls and an Adaptive Power Mode for automated adjustment of laser power, beam size and scan speeds for optimum build performance. 

The V650 Flex also comes equipped with adjustable beam spot sizes from 0.005” to 0.015” that enhance control, detail, smoothness and accuracy. With more precise printing comes better informed decision-making and better chances of success. You have twice the capacity and, to ease workflow further, this production-based machine provides a large VAT for maximum output (build volume 20”W x 20”D x 23”H) and interchangeable VATs.

Through partnering with Stratasys and Stereolithography now comes with an invaluable component: peace of mind. The V650 Flex is backed by the end-to-end and on-demand service and world-class support that is guaranteed with Stratasys. Any field issues get fixed fast, and their 30 years’ experience in 3D printing enable us to help you do more than ever, more efficiently.

Discover how you can work with advanced efficiency thanks to the all new Stratasys V650 Flex.

Contact the industry experts at PADT via the link below for more information:

Categories

Certified Elite Channel Partner

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Product Development
Diamond Partner

Technical Expertise to Enable your Addictive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: Phoenix Analysis and Design Technologies, 7755 S. Research Dr., Tempe, AZ, 85284, https://www.padtinc.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Share on twitter
Share on facebook
Share on linkedin
Share on pinterest

Upcoming Events

05/19/2022

RAPID + tct 2022

05/19/2022

Venture Cafe Roundtable: AI & Healthcare

05/18/2022

Tucson after5 Tech Mixer: World View

05/18/2022

RAPID + tct 2022

More Info

05/18/2022

Signal & Power Integrity Updates in Ansys 2022 R1 - Webinar

05/18/2022

Simulation World 2022

05/17/2022

RAPID + tct 2022

05/11/2022

Experience Stratasys Manufacturing Virtual Event

05/04/2022

Mechanical Meshing Updates in Ansys 2022 R1 - Webinar

04/27/2022

04/22/2022

12TH ANNUAL TUCSON GOLF TOURNAMENT

04/21/2022

04/20/2022

Additional Fluids Updates in Ansys 2022 R1

04/20/2022

Experience Stratasys Tour – Tempe Arizona

04/18/2022

Experience Stratasys Tour - Flagstaff Arizona

04/14/2022

D&M West | MD&M West

04/13/2022

D&M West | MD&M West

04/13/2022

Experience Stratasys Tour - Albuquerque New Mexico

04/12/2022

D&M West | MD&M West

04/12/2022

Experience Stratasys Tour - Los Alamos New Mexico

04/12/2022

Optimizing Engineering Workflows f​​​​or Propulsion System Design

04/07/2022

Experience Stratasys Tour - Austin Texas

04/07/2022

37th Space Symposium - Arizona Space Industry

04/06/2022

Transforming Digital Engineering with Ansys Discovery 2022 R1

04/06/2022

37th Space Symposium - Arizona Space Industry

04/05/2022

37th Space Symposium - Arizona Space Industry

04/04/2022

37th Space Symposium - Arizona Space Industry

03/30/2022

Simulation Best Practices for Vehicle Engineering - Webinar

03/23/2022

03/23/2022

High & Low Frequency Electromagnetics Updates in Ansys 2022 R1

02/24/2022

Arizona Technology Council After 5 Tech Mixer "Pandemic Pivot Pizza Pa

02/23/2022

SciTech Festival: Spend an Hour with 3D Printing Experts

02/11/2022

Webinar: Mechanical overview for Ansys 2022 R1

More Info

02/09/2022

Webinar: Product Development 101 (FAKE)

02/08/2022

Webinar: Navigating the Additive Landscape

01/27/2022

Arizona Technology Council 1st Quarter VIP Tech Mixer

More Info

01/26/2022

Simulation Best Practices for Gas Turbine Design & Development - Webin

More Info

01/19/2022

Arizona Photonics Days

More Info

11/04/2021

ExperienceIT, New Mexico

More Info

11/03/2021

Additive Manufacturing & Structural Optimization in Ansys 2021 R2 - We

More Info

11/03/2021

Optics Valley Technical Series: The Future of Simulation in the Optics

More Info

11/02/2021

SBIR Liftoff AZTC Virtual Breakfast Series

More Info

10/10/2021

Stratasys Mobile Truck Stop - Tucson Arizona

More Info

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: