Talking Hydrogen Fuel Cell Blowers for Trucking at the Governor’s House

By: Eric Miller
– July 11, 2019

As we shared in our recent press release, PADT was invited to be one of nine companies presenting at the 2019 Commercial Vehicle Cleantech Challenge. We happily spent the day at the Colorado Governor’s mansion talking and learning about how to make the road transportation of goods with large and small vehicles cleaner and more efficient. As one of nine companies presenting, PADT talked about our custom blower technology for hydrogen fuel cells.

We want to thank both the Colorado Cleantech Industries Association (CCIA) and the North American Council for Freight Efficiency (NACFE) for hosting such an informative event. We were able to meet people from across the energy and learn about their needs, and give them an opportunity to learn more about PADT.

You can find their blog post here.

Here are some pictures describing how our day went.

The building and grounds at the Colorado Governor’s Mansion are truly beautiful. We spent most of the day in the carriage house in the garden… which I failed to get a picture of.

It was a packed day as can be seen from the agenda. And the list of sponsors was fantastic. We were able to talk with key industry visionaries for more efficient and cleaner commercial vehicle fleets.

One of my favorite things about the site were these very cool napkins they gave us. Nice seal. And, “Executive Residence” sounds so much classier than “the Gov’s House”

We spent most of our day in the green room where they gave us wifi, coffee, power, and a flat surface. So Rob and I set up a portable office. The three blowers we brought with us helped decorate the place.

We can’s share the full presentation, but we can discuss some key slides. They gave us 10 minutes to talk about our solution, then 10 for questions.

The problem is fairly simple. People designing stacks need custom blower solutions because of the hydrogen and the pressure/flow requirements on the air side of a hydrogen fuel cell.

PADT’s proven solution is to design custom blowers to meet very specific needs.

In the end, we just wanted to know that we are excited to see that Hydrogen fuel cells are seeing a resurgence, our blowers are perfect for most applications, and that we would love connections to people who need our solution.

When we were done we went inside the house. Room after room was stunning.

We gave a 2-minute short presentation with this great view behind us.

A great day where we met a lot of great people from around the country. Sadly, PADT didn’t win the competition. The truth is that the challenge was for new and disruptive technology and we talked about proven and enabling solutions. Useful to the sponsors, but not what they were looking for when handing out prizes.

Visiting Colorado in the summer is always a nice break for those of us from Phoenix. We hope to participate in this and related events in the future.

If you have any needs for air our hydrogen blowers for your fuel cell, or any complex engineering for your product, please contact us and we would love to learn how we can help.

Categories

Certified Elite Channel Partner

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Product Development
Diamond Partner

Technical Expertise to Enable your Addictive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: Phoenix Analysis and Design Technologies, 7755 S. Research Dr., Tempe, AZ, 85284, https://www.padtinc.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Share on twitter
Share on facebook
Share on linkedin
Share on pinterest

Upcoming Events

09/21/2022

ExperienceIT NM 2022

09/21/2022

Additive Updates in Ansys 2022 R2 - Webinar

09/14/2022

Rocky Mountain Life Sciences Investor & Partnering Conference

09/08/2022

Ansys Optics Simulation User Group Meeting - Virtual

09/08/2022

Ansys Optics Simulation User Group Meeting

09/07/2022

SI & PI Updates in Ansys 2022 R2 - Webinar

08/31/2022

Simulation Best Practices for Developing Medical Devices - Webinar

08/24/2022

Mechanical Updates in Ansys 2022 R2 - Webinar

08/10/2022

Tucson after5 Tech Mixer: Ruda-Cardinal

08/05/2022

Flagstaff Tech Tour, 2022

08/02/2022

2022 CEO Leadership Retreat

08/01/2022

2022 CEO Leadership Retreat

07/27/2022

Thermal Integrity Updates in Ansys 2022 R1 - Webinar

07/20/2022

Simulation Best Practices for the Pharmaceutical Industry - Webinar

07/14/2022

NCMS Technology Showcase: Corpus Christi Army Depot

07/13/2022

NCMS Technology Showcase: Corpus Christi Army Depot

07/13/2022

Additive & Structural Optimization Updates in Ansys 2022 R1 - Webinar

07/07/2022

Arizona AADM Conference, 2022

06/29/2022

LS-DYNA Updates & Advancements in Ansys 2022 R1 - Webinar

06/23/2022

Simulation Best Practices for Wind Turbine Design - Webinar

06/15/2022

MAPDL Updates & Advancements in Ansys 2022 R1 - Webinar

06/01/2022

Mechanical Updates in Ansys 2022 R1 - pt. 2 Webinar

05/26/2022

Modelling liquid cryogenic rocket engines in Flownex - Webinar

05/25/2022

SMR & Advanced Reactor 2022

05/25/2022

05/24/2022

SMR & Advanced Reactor 2022

05/19/2022

RAPID + tct 2022

05/19/2022

Venture Cafe Roundtable: AI & Healthcare

05/18/2022

Tucson after5 Tech Mixer: World View

05/18/2022

RAPID + tct 2022

More Info

05/18/2022

Signal & Power Integrity Updates in Ansys 2022 R1 - Webinar

05/18/2022

Simulation World 2022

05/17/2022

RAPID + tct 2022

05/11/2022

Experience Stratasys Manufacturing Virtual Event

05/04/2022

Mechanical Meshing Updates in Ansys 2022 R1 - Webinar

04/27/2022

04/22/2022

12TH ANNUAL TUCSON GOLF TOURNAMENT

04/21/2022

04/20/2022

Additional Fluids Updates in Ansys 2022 R1

04/20/2022

Experience Stratasys Tour – Tempe Arizona

04/18/2022

Experience Stratasys Tour - Flagstaff Arizona

04/14/2022

D&M West | MD&M West

04/13/2022

D&M West | MD&M West

04/13/2022

Experience Stratasys Tour - Albuquerque New Mexico

04/12/2022

D&M West | MD&M West

04/12/2022

Experience Stratasys Tour - Los Alamos New Mexico

04/12/2022

Optimizing Engineering Workflows f​​​​or Propulsion System Design

04/07/2022

Experience Stratasys Tour - Austin Texas

04/07/2022

37th Space Symposium - Arizona Space Industry

04/06/2022

Transforming Digital Engineering with Ansys Discovery 2022 R1

04/06/2022

37th Space Symposium - Arizona Space Industry

04/05/2022

37th Space Symposium - Arizona Space Industry

04/04/2022

37th Space Symposium - Arizona Space Industry

03/30/2022

Simulation Best Practices for Vehicle Engineering - Webinar

03/23/2022

03/23/2022

High & Low Frequency Electromagnetics Updates in Ansys 2022 R1

02/24/2022

Arizona Technology Council After 5 Tech Mixer "Pandemic Pivot Pizza Pa

02/23/2022

SciTech Festival: Spend an Hour with 3D Printing Experts

02/11/2022

Webinar: Mechanical overview for Ansys 2022 R1

More Info

02/09/2022

Webinar: Product Development 101 (FAKE)

02/08/2022

Webinar: Navigating the Additive Landscape

01/27/2022

Arizona Technology Council 1st Quarter VIP Tech Mixer

More Info

01/26/2022

Simulation Best Practices for Gas Turbine Design & Development - Webin

More Info

01/19/2022

Arizona Photonics Days

More Info

11/04/2021

ExperienceIT, New Mexico

More Info

11/03/2021

Additive Manufacturing & Structural Optimization in Ansys 2021 R2 - We

More Info

11/03/2021

Optics Valley Technical Series: The Future of Simulation in the Optics

More Info

11/02/2021

SBIR Liftoff AZTC Virtual Breakfast Series

More Info

10/10/2021

Stratasys Mobile Truck Stop - Tucson Arizona

More Info

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: