Press Release: 3D Printing Glossary Now Available from PADT Provides Most Comprehensive Online Resource for Additive Manufacturing Terminology

3DPrinting-Glossary.com Covers Everything from Machines and Materials to Pre- and Post-Processing Terms

After searching the internet for a resource you can’t find, have you ever sat at your desk and said to yourself “I wish someone would take the time to create this. I could really use it.” Here at PADT, we have been saying that for many years about the need for a comprehensive reference on the terms used in Additive Manufacturing. Then we realized that the only way to get it done was to roll up our sleeves and do it ourselves. And so we did.

The result is www.3DPrinting-Glossary.com

3D Printing Glossary Term2 ScreenShot

This free online resource contains over 250 terms with definitions for each one. We write each definition and reviewed it amongst our team of long term users of Additive Manufacturing. After over 25 years in the business, we should know the difference between direct laser melting and selective laser sintering. And even if we are off a little, it is a start and we encourage the community to send us corrections, recommendations, and especially new terms to add to this compendium.

Glossary Print 1 banner1 scaled 2

The site is free for use, and the contents are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. This allows anyone to use the content how they wish as long as they say where it came from and don’t make money directly off of it.

Check it out and let us know what you think. More details are below in the official Press Release, which you can also find in PDF and HTML.

And do not hesitate to contact PADT for any of your Additive Manufacturing, Product Development, or Simulation needs. The same expertise that went into creating this resource is applied to every project we work on and every product we sell.


3D Printing Glossary Now Available from PADT Provides Most Comprehensive Online Resource for Additive Manufacturing Terminology

3DPrinting-Glossary.com Covers Everything from Machines and Materials to Pre- and Post-Processing Terms

TEMPE, Ariz., March 3, 2020 PADT, a globally recognized provider of numerical simulation, product development, and 3D printing products and services, today announced the launch of the most comprehensive online Glossary of industry terms relevant to additive manufacturing. The new site, www.3dprinting-glossary.com, includes more than 250 definitions in nine different categories.

3D Printing Glossary Index ScreenShot

“In addition to being an outstanding partner to our customers, PADT strives to be a trusted advisor on all things additive manufacturing,” said Eric Miller, co-founder and principal, PADT. “Our goal for the glossary is to help educate the community on the evolving terminology in our industry and serve as a critical resource for students and professionals seeking 3D printing knowledge and clarification.”

The company has been a provider of additive manufacturing services since 1994. They are also a Stratasys Platinum Partner that has sold and supported Stratasys equipment in the Southwest for over fifteen years. Many of their employees are recognized and award-winning experts in the AM community.

The creation of PADT’s 3D Printing Glossary was the result of a companywide effort to gather and define the terms used in the industry daily. The user-friendly website allows visitors to search for terms directly or by category. PADT will continue to support and update the glossary as the industry grows and innovates.

The nine glossary categories include:

  • Additive Manufacturing Processes
  • Build Characteristics
  • General
  • Manufacturing Term
  • Material
  • Post-Processing
  • Pre-Processing
  • Product Definition
  • System Characteristic

Since founding PADT in 1994, the company’s leadership has made a great effort to become more than just a reseller or service provider.  They want to be a resource to the community. In addition to investing in entrepreneurs, serving on technology boards and committees, and speaking at industry events, PADT donates a great deal of money, time and resources to STEM-focused educational initiatives. The 3D Printing Glossary is another resource that PADT has created for the benefit of students as well as up and coming professionals in the engineering and manufacturing industry.

PADT is also asking the community to contribute to this effort If users notice a term is missing, disagree with the definition, or have more to add to the definition, they ask that readers email additions or changes to info@padtinc.com.

About PADT

PADT is an engineering product and services company that focuses on helping customers who develop physical products by providing Numerical Simulation, Product Development, and 3D Printing solutions. PADT’s worldwide reputation for technical excellence and experienced staff is based on its proven record of building long-term win-win partnerships with vendors and customers. Since its establishment in 1994, companies have relied on PADT because “We Make Innovation Work.” With over 90 employees, PADT services customers from its headquarters at the Arizona State University Research Park in Tempe, Arizona, and from offices in Torrance, California, Littleton, Colorado, Albuquerque, New Mexico, Austin, Texas, and Murray, Utah, as well as through staff members located around the country. More information on PADT can be found at www.PADTINC.com.

# # #

Media contact: Alec Robertson Brodeur Partners arobertson@brodeur.com 585-281-6399

Organization Contact:
Eric Miller
PADT, Inc.
eric.miller@padtinc.com
480-813-4884

Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

09/27/2023

2023 AZ Bio Awards

09/26/2023

Experience Stratasys Truck Tour - Houston

09/22/2023

AIAA Rocky Mountain Section Technical Symposium 2023

09/22/2023

Experience Stratasys Truck Tour - Dallas, TX

09/21/2023

Accelerating the Energy Transition through Simulation

09/20/2023

3D Printing vs. CNC Machining - Webinar

09/13/2023

Maxwell Updates in Ansys 2023 R2 - Webinar

09/12/2023

Sandia Science & Technology Park 25th Anniversary

09/12/2023

Experience Stratasys Truck Tour - Tempe, AZ

09/08/2023

26th Annual New Mexico Flying 40 Awards

09/08/2023

New Mexico Tech Summit

09/07/2023

New Mexico Tech Summit

08/30/2023

Structures Updates in Ansys 2023 R2 (1) - Mechanical, Post & Graphics

08/23/2023

Improved Injection Molding with Additive - Webinar

08/22/2023

SPIE Optics & Photonics Exhibition 2023

08/16/2023

Fluids Updates in Ansys 2023 R2 - Webinar

08/04/2023

Experience Stratasys Truck Tour - Salt Lake City, Utah

08/01/2023

Experience Stratasys Truck Tour - Denver Colorado

07/26/2023

Solving Supply Chain Issues with Additive - Webinar

07/25/2023

Arizona Tech Leadership Golf Tournament

07/24/2023

Arizona Tech CEO Leadership Retreat

07/19/2023

System Automation & Optimization Updates in Ansys 2023 R1 - Webinar

07/13/2023

2023 AEROSPACE, AVIATION, DEFENSE AND MANUFACTURING CONFERENCE

07/12/2023

Materials Updates in Ansys Granta 2023 R1 - Webinar

06/30/2023

Turbo Expo 2023

06/29/2023

Turbo Expo 2023

06/28/2023

Turbo Expo 2023

06/28/2023

Revolutionize Packaging Design with Additive - Webinar

06/27/2023

Turbo Expo 2023

06/27/2023

2023 E-MOBILITY AND CLEAN ENERGY SUMMIT

06/26/2023

Turbo Expo 2023

06/21/2023

Optics Updates in Ansys 2023 R1 - Webinar

06/07/2023

LS-DYNA Updates in Ansys 2023 R1 - Webinar

05/31/2023

Driving Automotive Innovation with Additive - Webinar

05/24/2023

Hill Air Force Base Tech Expo

05/24/2023

Structural Updates in Ansys 2023 R1 (3) – Structural Optimization & Ex

05/23/2023

CROSSTALK 2023: Emerging Opportunities for Advanced Manufacturing Smal

05/10/2023

Signal & Power Integrity Updates in Ansys 2023 R1 - Webinar

04/26/2023

Additive Manufacturing Updates in Ansys 2023 R1 - Webinar

04/20/2023

38th Space Symposium Arizona Space Industry

More Info

04/19/2023

38th Space Symposium
Arizona Space Industry

04/19/2023

Additive Aids for Manufacturing - Webinar

04/18/2023

38th Space Symposium
Arizona Space Industry

04/17/2023

38th Space Symposium

04/13/2023

Venture Madness 2023

04/12/2023

Fluid Meshing & GPU-Solver Updates in Ansys 2023 R1 - Webinar

03/29/2023

8th Thermal and Fluids Engineering Conference

03/29/2023

Structural Updates in Ansys 2023 R1 - Composites, Fracture & MAPDL

03/28/2023

8th Thermal and Fluids Engineering Conference

03/27/2023

8th Thermal and Fluids Engineering Conference

03/26/2023

8TH Thermal and Fluids Engineering Conference

03/24/2023

Arizona BioPreneur Conference | Spring 2023

03/22/2023

2023 Arizona MedTech Conference

03/22/2023

Optimize Jigs & Fixtures with Additive - Webinar

03/15/2023

3D Design Updates in Ansys 2023 R1 - Webinar

03/08/2023

Competitive Advantages of 1D/3D Coupled Simulation - Webinar

03/01/2023

High Frequency Updates in Ansys 2023 R1 - Webinar

02/22/2023

Additive Advantages in Aerospace - Webinar

02/15/2023

Structural Updates in Ansys 2023 R1 (1) - Webinar

02/09/2023

IME 2023: MD&M | WestPack | ATX | D&M | Plastek

02/08/2023

IME 2023 MD&M | WestPack | ATX | D&M | Plastek

02/07/2023

IME 2023 MD&M | WestPack | ATX | D&M | Plastek

01/27/2023

Arizona Photonics Days, 2023

01/26/2023

Arizona Photonics Days, 2023

01/26/2023

TIPE 3D Printing | 2023

01/26/2023

Venture Cafe Phoenix Talent Night - Job Fari

01/26/2023

VFS 2023 Autonomous/Electric VTOL Symposium

01/25/2023

Arizona Photonics Days, 2023

01/25/2023

Building A.M.- Utah: Kickoff!

01/25/2023

TIPE 3D Printing | 2023

01/25/2023

VFS 2023 Autonomous/Electric VTOL Symposium

01/24/2023

VFS 2023 Autonomous/Electric VTOL Symposium

01/24/2023

TIPE 3D Printing | 2023

01/18/2023

2023 AZ Tech Council Golf Tournament

12/21/2022

Simulation Best Practices for 5G Technology - Webinar

12/14/2022

Digital Twins Updates in Ansys 2022 R2 - Webinar

12/08/2022

Tech the Halls - AZ Tech Council Holiday Mixer

12/07/2022

Electric Vehicle and Other Infrastructure Update Panel

11/30/2022

SPEOS Updates in Ansys 2022 R2 - Webinar

11/23/2022

Simulation Best Practices for Electronics Reliability - Webinar

11/16/2022

Discovery Updates in Ansys 2022 R2

11/10/2022

VentureCafe Phoenix Panel: Venture Capital in AZ

11/08/2022

2022 GOVERNOR’S CELEBRATION OF INNOVATION AWARDS + TECH SHOWCASE

11/03/2022

VentureCafe Phoenix Panel: Angel Investment in AZ

11/02/2022

High & Low Frequency Electromagnetics Updates in Ansys 2022 R2

10/26/2022

Simulation Best Practices For Chip-Package-System Design & Development

10/20/2022

Nerdtoberfest 2022

10/19/2022

2022 Southern Arizona Tech + Business Expo

10/19/2022

LS-DYNA Updates in Ansys 2022 R2 - Webinar

10/17/2022

Experience Stratasys Truck Tour - Clearfield Utah

10/14/2022

ASU School of Manufacturing Systems and Networks - Formal Opening Cele

10/14/2022

Experience Stratasys Truck Tour - Midvale Utah

10/12/2022

Experience Stratasys Truck Tour - Littleton Colorado

10/06/2022

Fluids Updates in Ansys 2022 R2 - Webinar

10/05/2022

Experience Stratasys Truck Tour - Colorado Springs

09/29/2022

White Hat Life Science Investor Conference - 2022

09/28/2022

2022 AZBio Awards

09/28/2022

Simulation Best Practices for Rotating Machinery Design & Development

09/21/2022

ExperienceIT NM 2022

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: