Advatech Pacific, a Phoenix-based aerospace and defense contractor founded in 1995, works to change the way engineering is conducted for the better by incorporating innovative technologies into its customer’s workflow. Based on the success of previous projects, Advatech is a strong proponent of using high-end simulation software such as Ansys to identify and evaluate the fine details of massive multi-body mechanical systems, whether through simple static analyses or tightly-coupled multiphysics computations.
Implementing additive manufacturing as an additional way to improve system design presented opportunities to cut back on tooling costs and reduce lead time for several candidate turbine-engine parts. Doing so would also alleviate the challenge of reproducing complex castings, a problem made increasingly difficult by the fact that many of the original casting providers are no longer in business.
Join PADT’s Lead Mechanical Engineer Doug Oatis, and Advatech Pacific’s Engineering Manager Matt Humrick for a discussion on Ansys tools with regards to additive manufacturing & topology optimization, and how Advatech Pacific was able to use them to drastically improve the efficiency of their design and manufacturing process.
If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).
You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!
You must be logged in to post a comment.