Running Ansys Fluent on Ansys Cloud using a Journal File and a UDF

By: Sina Ghods
– April 7, 2021
Categories:

Cloud computing is becoming more and more popular with the recent changes in the work environment, and Ansys Cloud solution is no exception. While running a Fluent simulation on the Ansys Cloud is now a more familiar task among CFD users since its introduction around a year ago, there are still some cases that might be challenging and need more attention. One of these cases is performing a Fluent simulation using a UDF.

The first thing users might notice when launching an Ansys Cloud Fluent job through the ACT extension is that the UDF files won’t be uploaded, which is why they might see their cases are failing if they don’t pay extra attention. In order to avoid this issue, users must follow one of the options below.

The first and most commonly used method to launch a Fluent job with a UDF is via the CLI (Command Line Interface). With this method, the .c and all other files in the working directory will be uploaded to the Cloud. Then UDF will then be compiled on the Cloud.

Since the Cloud computers already have compilers installed, one doesn’t need to anything special. The local directory should have .c file, case file with UDF plugged-in, and a journal file. As a side note, Ansys Fluent 19.3 and higher supports expressions that can be used to define boundary conditions instead of UDF. Starting with Ansys Fluent 2020R2, the C compiler is built-in with the software. Please refer to the product documentation.

We highly recommend that the user should have the required compiler installed locally to compile, hook, and test the routine before submitting it to the cloud.

If you have not used CLI to submit a Fluent job to the clouds, please read the article below:

https://cloudforum.ansys.com/t/80njy9/how-to-running-fluent-on-cloud-using-a-journal-file-and-udf

In short, you have to open a command prompt (cmd.exe) and navigate to your working folder. This folder should contain all the Fluent input files needed for the run: journal file, case file, etc. Once you login using ansyscloudcli command, you are ready to submit your job on the cloud.

Below is a common example for the commands to run Fluent on the cloud:

ansyscloudcli runfluent -j fluent_via_journal --jou tjunction.jou –q Flexible_eastus_Standard_HC44rs_2020r2 -n 1 -m 36 -v 2020r2

Here is some description of these commands:

> AnsysCloudCLI runFluent -j <job name> [--jou <journal>] -q <queue>  [-n <num nodes>] [-m <max cores>] -v <solver version>
-j: job name
-q: name of the queue 
    (run: ansyscloudcli getQueues, to get a list of all queues. Queue name is case sensitive)
-i: name of the input file for the solver
--jou: journal to execute (if set, -i is not used)
-n: number of nodes
-m: (optional) max number of cores. Useful if you want to make a run with 4 cores on a computer with 16 cores
-v: target solver version

The second method is to compile the UDF locally and upload all files to a virtual desktop infrastructure (VDI) session. Then the compiled UDF can be used with Fluent through the VDI session. Note that the UDF can’t be compiled on a VDI session with versions 2020R2 and earlier.

Lastly, with 2021R1 Fluent has a built in Clang compiler which will allow you to compile a UDF in a VDI session. However, the Clang compiler still won’t allow you to submit a Fluent job with a UDF through the ACT.

Ansys Cloud VDI solution running on a local desktop via RDP

Categories

Certified Elite Channel Partner

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Product Development
Diamond Partner

Technical Expertise to Enable your Addictive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: Phoenix Analysis and Design Technologies, 7755 S. Research Dr., Tempe, AZ, 85284, https://www.padtinc.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Share on twitter
Share on facebook
Share on linkedin
Share on pinterest

Upcoming Events

05/24/2022

SMR & Advanced Reactor 2022

05/19/2022

RAPID + tct 2022

05/19/2022

Venture Cafe Roundtable: AI & Healthcare

05/18/2022

Tucson after5 Tech Mixer: World View

05/18/2022

RAPID + tct 2022

More Info

05/18/2022

Signal & Power Integrity Updates in Ansys 2022 R1 - Webinar

05/18/2022

Simulation World 2022

05/17/2022

RAPID + tct 2022

05/11/2022

Experience Stratasys Manufacturing Virtual Event

05/04/2022

Mechanical Meshing Updates in Ansys 2022 R1 - Webinar

04/27/2022

04/22/2022

12TH ANNUAL TUCSON GOLF TOURNAMENT

04/21/2022

04/20/2022

Additional Fluids Updates in Ansys 2022 R1

04/20/2022

Experience Stratasys Tour – Tempe Arizona

04/18/2022

Experience Stratasys Tour - Flagstaff Arizona

04/14/2022

D&M West | MD&M West

04/13/2022

D&M West | MD&M West

04/13/2022

Experience Stratasys Tour - Albuquerque New Mexico

04/12/2022

D&M West | MD&M West

04/12/2022

Experience Stratasys Tour - Los Alamos New Mexico

04/12/2022

Optimizing Engineering Workflows f​​​​or Propulsion System Design

04/07/2022

Experience Stratasys Tour - Austin Texas

04/07/2022

37th Space Symposium - Arizona Space Industry

04/06/2022

Transforming Digital Engineering with Ansys Discovery 2022 R1

04/06/2022

37th Space Symposium - Arizona Space Industry

04/05/2022

37th Space Symposium - Arizona Space Industry

04/04/2022

37th Space Symposium - Arizona Space Industry

03/30/2022

Simulation Best Practices for Vehicle Engineering - Webinar

03/23/2022

03/23/2022

High & Low Frequency Electromagnetics Updates in Ansys 2022 R1

02/24/2022

Arizona Technology Council After 5 Tech Mixer "Pandemic Pivot Pizza Pa

02/23/2022

SciTech Festival: Spend an Hour with 3D Printing Experts

02/11/2022

Webinar: Mechanical overview for Ansys 2022 R1

More Info

02/09/2022

Webinar: Product Development 101 (FAKE)

02/08/2022

Webinar: Navigating the Additive Landscape

01/27/2022

Arizona Technology Council 1st Quarter VIP Tech Mixer

More Info

01/26/2022

Simulation Best Practices for Gas Turbine Design & Development - Webin

More Info

01/19/2022

Arizona Photonics Days

More Info

11/04/2021

ExperienceIT, New Mexico

More Info

11/03/2021

Additive Manufacturing & Structural Optimization in Ansys 2021 R2 - We

More Info

11/03/2021

Optics Valley Technical Series: The Future of Simulation in the Optics

More Info

11/02/2021

SBIR Liftoff AZTC Virtual Breakfast Series

More Info

10/10/2021

Stratasys Mobile Truck Stop - Tucson Arizona

More Info

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: