Materials, Composites & Scripting Updates in Ansys Mechanical 2021 R1 – Webinar

Composites provide new solutions for manufacturers looking for stronger, lighter and more cost-effective materials.

At the same time, they pose new modeling and manufacturing challenges because of the nature of the materials. With the right simulation tools, designers can account for residual stresses, predict performance, analyze reliability and potential failures, optimize construction, and export accurate information to manufacturing, all before a physical prototype is built.

Join PADT’s Application/Support Engineer and materials Expert Doug Oatis to learn more about updates made to the composites, materials and scripting capabilities in Ansys 2021 R1.

Register Here

All Things Ansys 089: Design for Autonomous Robotics

 

Published on: June 1st, 2021
With: Eric Miller & Jonathan Byars
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Jonathan Byars of AMP Robotics to discuss their recent presentation at Ansys Simulation World 2021, covering how Ansys mechanical aids in the design of quick release gripper mechanisms for autonomous material recycling robots.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things Ansys 088: Taking Simulation To The Moon

 

Published on: May 17th, 2021
With: Eric Miller, Tyler Smith & Connor Nail
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Tyler Smith and Connor Nail from the ASU Luminosity Lab to talk about their recent presentation at Ansys Simulation World 2021. A team of students at the ASU Luminosity Lab was awarded funding from NASA to develop a system for exploration of the permanently shadowed regions of the lunar poles.

Through this project titled VELOS (Variable Exploratory Lunar Observation System) the team designed, built, and conducted proof-of-concept testing to successfully validate operation of their prototype system. Learn how Ansys helped make their success possible.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Signal & Power Integrity Updates in Ansys 2021 R1 – Webinar

The use of Ansys Electronics solutions minimizes the testing costs, ensures regulatory compliance, improves reliability and drastically reduces your product development time. All this while helping you build the best-in-class and cutting-edge products.

With signal and power integrity (SI & PI) analysis products, users can mitigate many electrical and thermal issues affecting printed circuit boards such as electromagnetic interference, crosstalk, overheating, etc. Ansys integrated electromagnetics and circuit simulation tools are essential for designing high-speed serial channels, parallel buses, and complete power delivery systems found in modern high-speed electronic devices.

Leverage the simulation capability from Ansys to solve the most critical aspects of your designs. Join PADT’s Electronics expert and application engineer Aleksandr Gafarov for a detailed look at what is new for SI & PI in Ansys 2021 R1, including updates available within the following tools:

• SIwave – Granta support & differential time domain crosstalk

• Q3D – Uniform current terminals

• Circuits – Network data explorer & SPISim

• HFSS 3D – Parallel meshing, encrypted 3D components & IC workflow improvements

• Electronics Desktop – Ansys cloud, Minerva & optiSLang integration

• And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 087: Introducing Rocky DEM – The latest in 3D Discrete Element Modeling Technology

 

Published on: May 3rd, 2021
With: Eric Miller, Robert McCathren, Ahmad Haidari & Marcus Reis
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Application Engineer, Robert McCathren, as well as Ahmad Haidari – Senior Director of Strategy & Business Development at Rocky DEM, and Marcus Reis – VP of Sales, Support & Marketing at Rocky DEM to discuss the company’s partnership with Ansys and what their tool is capable of.

Rocky is a powerful 3D Discrete Element Modeling (DEM) Particle Simulation Software that quickly and accurately simulates the flow behavior of bulk materials with complex particle shapes and size distributions, for typical applications such as conveyor chutes, mills, mixers, and other materials handling equipment.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Electronics Reliability Updates in Ansys 2021 R1 – Webinar

Best practices for ensuring and predicting electronics reliability require comprehensive multi-physics simulations. Ansys ensures reliability success by developing solutions and workflows that overcome today’s biggest simulation and design challenges. 

With Ansys 2021 R1, electronics reliability became much easier to manager with advanced capabilities for design democratization, workflow automation, and robust reliability predictions. Along with these updated components, users can better access integrated workflows between Ansys Sherlock, Icepak, Mechanical, LS-Dyna, and more to provide the results necessary to optimize product designs and ensure unparalleled reliability in the field. 

Join PADT’s Systems Application & Support Engineer Josh Stout for a presentation covering updates to existing features and the introduction of new tools available in this latest release. Learn how users can:

• Extract detailed geometries from any ECAD file

     • Predict time to failure before prototyping

     • Perform complex multiphysics analyses

     • Implement automation and optimization 

     • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 086: Thermal Integrity in Ansys 2021 R1

 

Published on: April 20th, 2021
With: Eric Miller & Josh Stout
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Systems Application & Support Engineer, Josh Stout in order to discuss what is new with regards to thermal integrity in Ansys 2021 R1.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Mechanical Analysis Updates in Ansys 2021 R1 – Webinar

Ansys 2021 R1 delivers significant improvements in simulation technology together with nearly unlimited computing power to help engineers across all industries reimagine product design and achieve product development goals that were previously thought impossible. 

With updates made to Ansys mechanical, users can easily handle the complexity of a variety of design environments. Everything from mulitphysics analysis to dynamic simulation allows for the ability to create a product that meets performance goals and holds up over time. 

Join PADT’s Application Engineer Robert McCathren for a look at analytical advancements in Ansys Mechanical 2021 R1, including updates for: 

          ​​​​• Element Technology

          • NonLinear Adaptivity

          • Coupled Physics Analysis

          • Linear Dynamics

          • Contact

          • And much more

Register Here

All Things Ansys 085: Additive & Structural Optimization Updates in Ansys 2021 R1

 

Published on: April 5th, 2021
With: Eric Miller & Doug Oatis
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Lead Mechanical Engineer, Doug Oatis in order to discuss what is new with regards to additive and structural optimization in Ansys 2021 R1.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Experience Stratasys: Manufacturing – Virtual Reveal

In one blockbuster event, Stratasys will unveil the most complete set of new, best-in-class, additive manufacturing solutions the industry has ever seen.

From tooling and jigs and fixtures to mass production of end use parts, Stratasys is redefining speed, productivity, and agility in manufacturing.

Wednesday, April 28th, 2021 – 9:00 am CST

Register today to join us for a 30-minute virtual live reveal with Stratasys CEO Yoav Zeif. After Yoav’s exciting overview, we’ll conduct detailed breakout sessions and demonstrate how each of these new solutions will transform your manufacturing operations and help you seize a competitive advantage.

Secure your spot now – you don’t want to miss this unparalleled event!

Register Here

Thermal Integrity Updates in Ansys 2021 R1 – Webinar

With CAD-centric (mechanical and electrical CAD) and multiphysics user interfaces, Icepak facilitates the solving of today’s most challenging thermal management problems in electronics products and assemblies. Icepak uses sophisticated CAD healing, simplification and metal fraction algorithms that reduce simulation times, while providing highly accurate solutions that have been validated against real-world products.

This tool provides powerful electronic cooling solutions that utilize the industry leading Ansys Fluent computational fluid dynamics solver for thermal and fluid flow analyses of integrated circuits, packages, printed circuit boards, and electronic assemblies.

With the release Ansys 2021 thermal integrity capabilities saw improvements in a variety of areas. Join PADT’s Application & Support Engineer and Thermal Integrity expert Josh Stout to learn more about recent advancements surrounding: 

• Solar Radiation Modeling

     • Robust Meshing Distribution

     • Dynamic Thermal Management

     • The Release of AEDT Mechanical Solutions

     • And Much More

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 084: The State of Mechanical Meshing in Ansys 2021

 

Published on: March 22nd, 2021
With: Eric Miller & Joe Woodward
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Mechanical Engineer and Lead Trainer, Joe Woodward in order to discuss what new mechanical meshing capabilities are available in Ansys 2021.

Meshing is an integral part of the engineering simulation process where complex geometries are divided into simple elements that can be used as discrete local approximations of the larger domain. The mesh influences the accuracy, convergence and speed of the simulation. Furthermore, since meshing typically consumes a significant portion of the time it takes to get simulation results, the better and more automated the meshing tools, the faster and more accurate the solution.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Additive & Structural Optimization Updates in Ansys 2021 R1 – Webinar

The most powerful simulation solution for metal additive manufacturing, the Ansys Additive Suite delivers the critical insights required by designers, engineers and analysts to avoid build failure and create parts that accurately conform to design specifications. This comprehensive solution spans the entire workflow — from design for additive manufacturing (DfAM) through validation, print design, process simulation and exploration of materials.

Ansys 2021 R1 delivers enhancements across all portfolio products — Ansys Additive Prep, Ansys Additive Print, Ansys Additive Science and Ansys Workbench Additive — empowering users to further advance their additive manufacturing capabilities.

Join PADT’s Simulation Support & Application Engineer Doug Oatis for a webinar covering both the structural optimization and additive updates made to Ansys 2021 R1 including enhancements for: 

  • Process Simulation

  • Part Qualification

  • Design for AM

  • Build Setup

  • Shape & Lattice Optimization

  • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 083: Digital Mission Engineering & the Acquisition of AGI

 

Published on: March 8th, 2021
With: Eric Miller, Anthony Dawson & Paul Graziani
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Anthony Dawson, Vice President & General Manager at Ansys, and Paul Graziani, CEO and Co-Founder of Analytical Graphics, Inc. (AGI) to discuss the acquisition of AGI and what it means for those simulating in the aerospace and defense industry.

Digital mission engineering, pioneered by AGI, combines digital modeling, simulation, testing, and analysis for aerospace, defense, telecommunication, and intelligence applications to evaluate mission outcomes at every phase of a system’s life cycle. Using this tool you can evaluate the full effect of every change you make and find problems before they become crises.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

The State of Mechanical Meshing in Ansys 2021 R1 – Webinar

Meshing is an integral part of the engineering simulation process where complex geometries are divided into simple elements that can be used as discrete local approximations of the larger domain. The mesh influences the accuracy, convergence and speed of the simulation. Furthermore, since meshing typically consumes a significant portion of the time it takes to get simulation results, the better and more automated the meshing tools, the faster and more accurate the solution.

Ansys provides general purpose, high-performance, automated, intelligent meshing software which produces the most appropriate mesh for accurate, efficient multiphysics solutions — from easy, automatic meshing to highly crafted mesh. 

Join PADT’s Senior Mechanical Engineer and meshing expert Joe Woodward for an introduction to the new meshing capabilities available in Ansys 2021 R1, including updates for: 

• Repairing Topology

• Weld Control

• Separating Morphing Adaptive Remeshing Technology (SMART)

• Batch Connections

• And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!