Additive & Structural Optimization Updates in Ansys 2021 R1 – Webinar

The most powerful simulation solution for metal additive manufacturing, the Ansys Additive Suite delivers the critical insights required by designers, engineers and analysts to avoid build failure and create parts that accurately conform to design specifications. This comprehensive solution spans the entire workflow — from design for additive manufacturing (DfAM) through validation, print design, process simulation and exploration of materials.

Ansys 2021 R1 delivers enhancements across all portfolio products — Ansys Additive Prep, Ansys Additive Print, Ansys Additive Science and Ansys Workbench Additive — empowering users to further advance their additive manufacturing capabilities.

Join PADT’s Simulation Support & Application Engineer Doug Oatis for a webinar covering both the structural optimization and additive updates made to Ansys 2021 R1 including enhancements for: 

  • Process Simulation

  • Part Qualification

  • Design for AM

  • Build Setup

  • Shape & Lattice Optimization

  • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

The State of Mechanical Meshing in Ansys 2021 R1 – Webinar

Meshing is an integral part of the engineering simulation process where complex geometries are divided into simple elements that can be used as discrete local approximations of the larger domain. The mesh influences the accuracy, convergence and speed of the simulation. Furthermore, since meshing typically consumes a significant portion of the time it takes to get simulation results, the better and more automated the meshing tools, the faster and more accurate the solution.

Ansys provides general purpose, high-performance, automated, intelligent meshing software which produces the most appropriate mesh for accurate, efficient multiphysics solutions — from easy, automatic meshing to highly crafted mesh. 

Join PADT’s Senior Mechanical Engineer and meshing expert Joe Woodward for an introduction to the new meshing capabilities available in Ansys 2021 R1, including updates for: 

• Repairing Topology

• Weld Control

• Separating Morphing Adaptive Remeshing Technology (SMART)

• Batch Connections

• And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

General Interface & Performance Updates in Ansys 2021 R1 – Webinar

Ansys 2021 R1 delivers significant improvements in simulation technology together with nearly unlimited computing power to help engineers across all industries reimagine product design and achieve product development goals that were previously thought to be impossible.

Ansys Mechanical delivers features to enable faster simulations, easier workflows, journaling, scripting and product integrations that offer more solver capabilities. Within this new release, interface and performance capabilities have been enhanced to offer greater ease of use and overall efficiency in nearly every circumstance. 

Join PADT’s Simulation Support Manager and Ansys expert Ted Harris, for an overview of what updates in this release best energize this tool, such as enhancements made to:

• Solution History

• Fluid Network Creation

• Circuits

• GPU & Solvers

• And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

High Frequency Updates in Ansys 2021 R1 – Webinar

Whether leveraging improved workflows or leading-edge capabilities with Ansys 2021 R1, teams are tackling design challenges head on, eliminating the need to make costly workflow tradeoffs, developing next-generation innovations with increased speed and significantly enhancing productivity, all in order to deliver high-quality products to market faster than ever.

When it comes to high frequency electromagnetics, Ansys 2021 R1 delivers a plethora of groundbreaking enhancements. Ansys HFSS Mesh Fusion enables simulation of large, never before possible electromagnetic systems with efficiency and scalability. This release also allows for encrypted 3D components supported in HFSS 3D Layout for PCBs, IC packages and IC designs to enable suppliers to share detailed 3D component designs for creating highly accurate simulations.

Join PADT’s Lead Electromagnetics Engineer and high frequency expert Michael Griesi for a presentation on updates made to the Ansys HF suite in the 2021 R1 release, including advancements for:

  • Electronics Desktop
  • HFSS
  • Circuits
  • EMIT
  • And Much More

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Workflow & Meshing Updates in Ansys Fluent 2021 R1 – Webinar

From small to mid-sized companies to global organizations, companies of every size seek new ways for pioneering breakthrough innovations that are safer and more reliable to win the race to market.

Ansys 2021 R1 delivers significant improvements in simulation technology together with nearly unlimited computing power to help engineers across all industries reimagine product design and achieve product development goals that were previously thought impossible.

For fluids simulation in this release, products can be designed faster than ever before, thanks to major physics and productivity enhancements that build upon the tool’s ​already powerful workflow and meshing capabilities. Join PADT’s Senior Simulation Support & Application Engineer and fluids expert Sina Ghods for a look at what’s new in this release including: 

• Fluent User Interface Updates

      • Meshing Workflow Advancements

      • Combustion Applications

      • Turbomachinery Applications

      • Battery Modeling Applications

      • Multiphase and DPM Improvements

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Discussions on the Past, Present & Future of Optimizing Topology for Manufacturing – Webinar

Traditional design approaches don’t make the most of new manufacturing methods, like additive manufacturing, which are removing design constraints and opening up new possibilities. The optimal shape of a part is often organic and counterintuitive, so designing it requires a different approach.

Topology optimization lets you specify where supports and loads are located on a volume of material and lets the software find the best shape.

Kick off the year by learning about one of the most exciting advancements in modern design and manufacturing. Join experts from PADT and nTopology for an interactive roundtable discussion on the ins and outs of topological optimization.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Optimize Additive Topology with FDM Fixture Generator – Webinar

Additive Manufacturing has profoundly impacted all aspects of manufacturing. With the ability to increase speed-to-market, lower production costs, and customize specialty parts, it continues to fuel innovation. Manufacturing jigs, fixtures, and other tooling accounts for more than 20% of all end-use parts produced with 3D printing today. Yet, without tools that make the design of custom jigs and fixtures simpler, many users are kept from reaching the full benefits of Additive Manufacturing on the factory floor.

One tool that is helping engineers bypass this roadblock is the latest collaborative effort from Stratasys and nTopology, the FDM Fixture Generator.

This innovative software tool allows you to automate the design of 3D printed jigs & fixtures. Generate custom designs and streamline operations on your factory floor without spending time in CAD. Ready to print with a few clicks.

Join nTopology and PADT to learn more about FDM Fixture Generator and how it stands to disrupt the manufacturing environment.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Optimization & Automation Updates in Ansys 2020 R2 – Webinar

Simulation is becoming an integral part of our customers’ product development processes, and new horizons await. By combining different physics into a multidisciplinary approach, phenomena can be investigated more holistically and optimized to a greater degree. Additionally, simulation processes can be standardized and shared across teams, allowing simulation novices to gain more direct access to simulation.

Time-consuming manual searches for the best and most robust design configuration can now be accelerated by adding state-of-the-art algorithms for design exploration, optimization, robustness and reliability analysis. Through the power of interactive visualization and artificial intelligence technologies, engineers and designers can gain a better understanding of their design and make the right decisions in less time.

The process integration and design optimization solution that enables all the above is Ansys optiSLang.

Join PADT’s Mechanical Application Engineer and Systems Expert Josh Stout for an exploration of this interconnected tool and what new capabilities are available in it’s 2020 R2 release.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Multibody Dynamics Updates in Ansys Motion 2020 R2 – Webinar

Ansys Motion, now in the Mechanical interface, is a third generation engineering solution based on an advanced multibody dynamics solver that enables fast and accurate analysis of rigid and flexible bodies and gives an accurate evaluation of physical events through the analysis of the mechanical system as a whole.

Ansys Motion uses four tightly integrated solving schemes (rigid body, flexible body, modal & meshfree EasyFlex) that give the user unparalleled capabilities to analyze in any combination imaginable. Large assemblies with millions of degrees of freedom can be studied with the effects of flexibility and contact included. With an integration into Mechanical, users can take advantage of multi-use models resulting in substantial time savings.

Join PADT’s Senior Staff Technologist, Jim Peters for an exploration of what this tool has to offer, and how seamlessly it integrates with the Ansys Mechanical interface.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

MAPDL – Elements, Contact & Solver Updates in Ansys 2020 R2 – Webinar

The Ansys finite element solvers enable a breadth and depth of capabilities unmatched by anyone in the world of computer-aided simulation. Thermal, Structural, Acoustic, Piezoelectric, Electrostatic and Circuit Coupled Electromagnetics are just an example of what can be simulated. Regardless of the type of simulation, each model is represented by a powerful scripting language, the Ansys Parametric Design Language (APDL).

APDL is the foundation for all sophisticated features, many of which are not exposed in the Workbench Mechanical user interface. It also offers many conveniences such as parameterization, macros, branching and looping, and complex math operations. All these benefits are accessible within the Ansys Mechanical APDL user interface.

Join PADT’s Simulation Support Manager, Ted Harris for a look at what’s new for MAPDL in Ansys 2020 R2, regarding:

  • Contact Modeling & Robustness
  • Elements
  • Post Processing
  • Solver Components
  • And Much More

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Optical System Design & Disruption in Ansys SPEOS 2020 R2 – Webinar

When customers evaluate products, the overall look and details can make all the difference. Ansys physics-based imaging, photonics and illumination software streamlines the design process, so you can better understand how your product will look and operate under real-world lighting and usage conditions.

Whether you are designing a TV screen, street lighting network, smart headlight, head-up display or interior mood lighting in an automobile, Ansys optical simulation software helps you make your design more efficient and appealing. Optical sensors are the eyes of any intelligent system, and Ansys physics-based simulations can help you assess raw signals from camera and lidar systems in their operating environments.

Ansys 2020 R2 empowers Ansys SPEOS users to go further than ever before with enhancements that improve the handling of complex sensors, project preview and computation.

Enhancements include:

 •  Highly accurate camera models drastically improve camera simulation experience 

•  Faster simulation times when using light sources and provides nearly real-time review 

•  4X faster simulation setup thanks to optimized GUI

Join PADT’s Application Engineer Robert McCathren for a first hand look at the capabilities of optical simulation, followed by what’s available for SPEOS in the Ansys 2020 R2 update.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Design & Digital Engineering Updates in Ansys 2020 R2 – Webinar

The Ansys Discovery suite of tools allows engineers to improve their 3D design capabilities, by increasing productivity, improving product quality, and spurring innovation. Explore ideas, iterate and innovate with unprecedented speed early in your design process with Ansys 3D design software.

Delve deeper into design details, refine concepts and perform multiple physics simulations to better account for real-world behaviors. 

Join PADT’s Application Engineer Robert McCathren for a look at 3D product design and updates for Ansys Discovery AIM, Live, and SpaceClaim in 2020 R2.

In the Ansys 2020 R2, users can explore large design spaces and answer critical design questions early in the product design process without waiting days or weeks for traditional simulation results.

Additionally, these tools have been upgraded to support concept modeling and model prep for importing modified CAD geometry, auto-skinning topology optimization results from Ansys Mechanical for automated geometry reconstruction, and so much more.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Optimizing Electronics Reliability with Ansys Sherlock – Webinar

Ansys Sherlock automated design analysis software is the only Reliability Physics/Physics of Failure (PoF)-based electronics design analysis software that provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early design stages. A unique, powerful capability of Sherlock is its revolutionary ability to rapidly convert electronic CAD (ECAD) files into CFD and FEA models with accurate geometries and material properties.

Through its powerful parsing engine and embedded libraries containing over 500,000 parts, Sherlock reduces pre-processing time from days to minutes and automates workflows through its integration with Ansys Icepak, Ansys Mechanical and Ansys Workbench.

With its extensive parts/materials libraries, Sherlock automatically identifies your files and imports your parts list, then builds an FEA model of your circuit board in minutes. It also produces a holistic analysis that is critical to developing reliable electronics products. It enables designers to simulate each environment, failure mechanism and assembly that a product might encounter over its lifespan.

Join PADT’s Systems Application & Support Engineer Josh Stout for an introduction to this powerful tool along with a look at what new features and updates have been added in the Ansys 2020 R2 version.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Fluent Updates in Ansys 2020 R2 – Webinar

The industry-leading fluid simulation software Ansys Fluent is capable of predicting fluid flow, heat & mass transfer, chemical reactions and other related phenomena.

Known for delivering the most accurate solutions in the industry without compromise, Ansys continues to provide cutting-edge advancements with each new release. In 2020 R2 users can learn about updates from pre-processing to new physics models and workflow improvements.

Join PADT’s Senior Simulation Support & Application Engineer Sina Ghods for an in depth discussion on what is new and improved in this version of Ansys Fluent, covering topics such as:

– Meshing Workflows

– Battery Modeling

– Multi-phase & DPM Flow

– Solver Enhancements

– And Much More

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Mechanical Updates in Ansys 2020 R2 – Webinar

From designers and occasional users looking for quick, easy and accurate results, to experts looking to model complex materials, large assemblies and nonlinear behavior, Ansys has you covered. The intuitive interface of Ansys Mechanical enables engineers of all levels to get answers fast and with confidence. Ansys structural analysis software is used across industries to help engineers optimize their product designs and reduce the costs of physical testing.

Ansys Mechanical is the flagship mechanical engineering software solution that uses finite element analysis (FEA) for structural analysis.It covers an enormous range of applications and comes complete with everything you need from geometry preparation to optimization and all the steps in between. With Mechanical Enterprise you can model advanced materials, complex environmental loadings and industry-specific requirements in areas such as offshore hydrodynamics and layered composite materials.

In this webinar, PADT’s Senior Mechanical Engineer & Lead Trainer, Joe Woodward will cover a few key components of this tool and what is newly available for them in Ansys 2020 R2. This includes updates for:

– Mechanical Core

– Mechanical Graphics/Post Processing

– Linear Dynamics

– SMART Fracture

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!