Meshing in the New Ansys Fluent Task-based Workflows

Categories:

Working with a variety of users with different levels of CFD (Computational Fluid Dynamics) backgrounds, I have to admit that Fluent meshing used to be a challenging and confusing task for beginners and even intermediate users.

Ansys has addressed this challenge by redesigning the Fluent user interface to provide a task-based workflow for meshing that enables engineers to do more and solve more complex problems than ever before in less time. The new Fluent task-based workflow streamlines the user experience by providing a single window that offers only relevant choices and options and prompts the user with best practices that deliver better simulation results.

Best practices are embedded into the workflow in the form of defaults and messages to the user. This reduces the amount of training required to start using the software and makes it easier for occasional users to return to the software.

How to Mesh Watertight CFD Geometry in the New Ansys Fluent Task-based Workflow

In order to use this workflow, you need a relatively clean watertight solid and/or fluid regions that can be meshed by surface meshing and then volume filling (no wrapping required.) Geometry can consist of single or multiple bodies.

Going through the task-based workflow is straightforward. You are presented with several steps, like:

  • Surface mesh.
  • Describe geometry. (Fluid and/or solid)
  • Capping. (If you are creating an internal flow volume, then the capping tools in Fluent makes extraction easy)
  • Volume meshing. (If you wish to use the latest Mosaic meshing technology, select “Poly-hexcore”)
PADT Ansys Fluent Meshing TaskBasedWorflow f01
PADT Ansys Fluent Meshing TaskBasedWorflow f02
Mosaic Meshing Technology

Now, click on “Switch-to-Solution,” to bring the mesh into a familiar Fluent interface.

PADT Ansys Fluent Meshing TaskBasedWorflow f03

Fault-Tolerant Workflow for Ansys Fluent Meshing Wraps and Seals Leaks and Gaps

Sometimes CFD simulations contain dirty, non-watertight geometries. For instance, 3D scanned or manufacturing geometry files. These geometries may contain missing faces, gaps, holes, overlaps, and other issues. As a result, they require extensive cleanup before simulation.

To overcome this obstacle, Ansys offers a new Fluent meshing workflow that wraps dirty geometry without cleanup.

The workflow for non-watertight geometry offers distinct advantages over other meshing technologies such as:

Part management:

Users can perform CAD-level changes to any geometry or assembly, including dragging and dropping objects from the CAD model into the simulation model.

Leakages and overlaps:

The fault-tolerant workflow seals leakages caused by gaps and misalignments between solid bodies. This significantly reduces the manual efforts required to clean up geometry.

PADT Ansys Fluent Meshing TaskBasedWorflow f05
The fault-tolerant workflow can easily wrap leaky geometry

STL file input

The workflow can create fluid regions directly from STL files or scanned data. This eliminates the need to convert STL files into solid geometry for the biomedical, oil and gas, automotive and other industries.

PADT Ansys Fluent Meshing TaskBasedWorflow f04
Imported STL File

2020R2 updates:

There are a few important improvements both in Watertight meshing (WTM) and Fault-Tolerant meshing (FTM) workflows in the 2020R2 release.

FTM/WTM: Wild card selection in lists

The Meshing Workflows now have an option to use a persistent Wildcard string for selecting labels or zones. This is in addition to the Filter Text option previously available. The new Use WildCard option stores the wildcard string itself in recorded workflows instead of an explicit list of locations so that when they are played back with new geometries, the matching will be performed again and pick up any matching zones/labels that were not in the earlier geometry.

PADT Ansys Fluent Meshing TaskBasedWorkflow f06

WTM: Support of Region-specific Sizing 

You can specify region-specific Max Size and Growth Rates during the Volume Meshing task.  If you enable Region-based Sizing, Fluent will compute default sizing specifications for each region.  These can then be adjusted as required for each region.

PADT Ansys Fluent Meshing TaskBasedWorkflow f07

WTM: Start From Imported Surface Mesh

This is useful if you have an established surface-meshing workflow or if you already have a mesh generated (perhaps from another preprocessor or an existing Fluent case) and want to use that as a starting point for Fluent meshing. Once you import the surface mesh you have the option of using it as it is, or selectively adding additional Local Size controls and/or remeshing particular surfaces as needed.

FTM: Continuous prism layers for Poly and Poly-Hexcore for Fluids

For the Fault-Tolerant Meshing Workflow you can now create continuous prism layers without stair-stepping within poly and poly-hexcore fluid regions.  Note that this will apply in all zones of the region.

WTM: Support of Local Sizing on Labeled Edges

Once you have labeled the edges, you can select Edge Size in Add Local Sizing to prescribe a target size on the selected edge(s).

PADT Ansys Fluent Meshing TaskBasedWorkflow f08
Categories

Get Your Ansys Products & Support from the Engineers who Contribute to this Blog.

Technical Expertise to Enable your Additive Manufacturing Success.

PADT’s Pulse Newsletter

Keep up to date on what is going on at PADT by subscribing to our newsletter.


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Share this post:

Upcoming Events

03/27/2024

High Frequency Updates in Ansys 2024 R1 - Webinar

03/27/2024

2024 Arizona Space Summit

03/28/2024

SAF Blue Carpet Event

03/28/2024

2024 Arizona Space Summit

04/03/2024

Low Frequency Updates in Ansys 2024 R1 - Webinar

04/03/2024

Venture Madness Conference Reception + Expo

04/08/2024

39th Space Symposium

04/09/2024

39th Space Symposium

04/10/2024

Discovery Updates in Ansys 2024 R1 - Webinar

04/10/2024

39th Space Symposium

04/11/2024

39th Space Symposium

04/24/2024

Structures Updates in Ansys 2024 R1 (2)

05/08/2024

Fluent Materials Processing Updates in Ansys 2024 R1 - Webinar

05/22/2024

Optics Updates in Ansys 2024 R1 - Webinar

06/12/2024

Connect Updates in Ansys 2024 R1 - Webinar

06/26/2024

Structures Updates in Ansys 2024 R1 (3) - Webinar

06/27/2024

E-Mobility and Clean Energy Summit

07/10/2024

Fluids Updates in Ansys 2024 R1 - Webinar

08/05/2024

2024 CEO Leadership Retreat

10/23/2024

PADT30 | Nerdtoberfest 2024

Search in PADT site

Contact Us

Most of our customers receive their support over the phone or via email. Customers who are close by can also set up a face-to-face appointment with one of our engineers.

For most locations, simply contact us: