All Things Ansys 078: Optimization & Automation Updates in Ansys 2020 R2 – OptiSLang

 

Published on: December 14th, 2020
With: Eric Miller & Josh Stout
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Systems Support & Application Engineer Josh Stout for a discussion on how OptiSLang helps to increase the robustness and reliability of simulation, as well as a look at what new features are in the 2020 R2 updated version.

If you would like to learn more about this update, you can view Josh’s webinar on the topic here:

https://www.brighttalk.com/webcast/15747/458229

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Optimization & Automation Updates in Ansys 2020 R2 – Webinar

Simulation is becoming an integral part of our customers’ product development processes, and new horizons await. By combining different physics into a multidisciplinary approach, phenomena can be investigated more holistically and optimized to a greater degree. Additionally, simulation processes can be standardized and shared across teams, allowing simulation novices to gain more direct access to simulation.

Time-consuming manual searches for the best and most robust design configuration can now be accelerated by adding state-of-the-art algorithms for design exploration, optimization, robustness and reliability analysis. Through the power of interactive visualization and artificial intelligence technologies, engineers and designers can gain a better understanding of their design and make the right decisions in less time.

The process integration and design optimization solution that enables all the above is Ansys optiSLang.

Join PADT’s Mechanical Application Engineer and Systems Expert Josh Stout for an exploration of this interconnected tool and what new capabilities are available in it’s 2020 R2 release.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 077: Multibody Dynamics Updates in Ansys Motion 2020 R2

 

Published on: November 30th, 2020
With: Eric Miller & Jim Peters
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Staff Technologist Jim Peters for a discussion on the new capabilities available within Ansys Motion 2020 R2. With an integration into Mechanical, users can take advantage of multi-use models resulting in substantial time savings.

If you would like to learn more about this update, you can view Jim’s webinar on the topic here:

https://www.brighttalk.com/webcast/15747/455203

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Multibody Dynamics Updates in Ansys Motion 2020 R2 – Webinar

Ansys Motion, now in the Mechanical interface, is a third generation engineering solution based on an advanced multibody dynamics solver that enables fast and accurate analysis of rigid and flexible bodies and gives an accurate evaluation of physical events through the analysis of the mechanical system as a whole.

Ansys Motion uses four tightly integrated solving schemes (rigid body, flexible body, modal & meshfree EasyFlex) that give the user unparalleled capabilities to analyze in any combination imaginable. Large assemblies with millions of degrees of freedom can be studied with the effects of flexibility and contact included. With an integration into Mechanical, users can take advantage of multi-use models resulting in substantial time savings.

Join PADT’s Senior Staff Technologist, Jim Peters for an exploration of what this tool has to offer, and how seamlessly it integrates with the Ansys Mechanical interface.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 076: MAPDL – Elements, Contact & Solver Updates in Ansys 2020 R2

 

Published on: November 16th, 2020
With: Eric Miller & Ted Harris
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Manager Ted Harris for a discussion on what’s new in the Ansys Mechanical APDL 2020 R2 release.

If you would like to learn more about this update, you can view Ted’s webinar on the topic here:

https://www.brighttalk.com/webcast/15747/452033

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

MAPDL – Elements, Contact & Solver Updates in Ansys 2020 R2 – Webinar

The Ansys finite element solvers enable a breadth and depth of capabilities unmatched by anyone in the world of computer-aided simulation. Thermal, Structural, Acoustic, Piezoelectric, Electrostatic and Circuit Coupled Electromagnetics are just an example of what can be simulated. Regardless of the type of simulation, each model is represented by a powerful scripting language, the Ansys Parametric Design Language (APDL).

APDL is the foundation for all sophisticated features, many of which are not exposed in the Workbench Mechanical user interface. It also offers many conveniences such as parameterization, macros, branching and looping, and complex math operations. All these benefits are accessible within the Ansys Mechanical APDL user interface.

Join PADT’s Simulation Support Manager, Ted Harris for a look at what’s new for MAPDL in Ansys 2020 R2, regarding:

  • Contact Modeling & Robustness
  • Elements
  • Post Processing
  • Solver Components
  • And Much More

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 075: Optical System Design & Disruption in Ansys SPEOS 2020 R2

 

Published on: November 2nd, 2020
With: Eric Miller & Robert McCathren
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Application Engineer Robert McCathren for a look at how Ansys 2020 R2 empowers SPEOS users to go further than ever before with enhancements that improve the handling of complex sensors, project preview and computation.

If you would like to learn more about this update, you can view Robert’s webinar on the topic here:

https://www.brighttalk.com/webcast/15747/449021

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Optical System Design & Disruption in Ansys SPEOS 2020 R2 – Webinar

When customers evaluate products, the overall look and details can make all the difference. Ansys physics-based imaging, photonics and illumination software streamlines the design process, so you can better understand how your product will look and operate under real-world lighting and usage conditions.

Whether you are designing a TV screen, street lighting network, smart headlight, head-up display or interior mood lighting in an automobile, Ansys optical simulation software helps you make your design more efficient and appealing. Optical sensors are the eyes of any intelligent system, and Ansys physics-based simulations can help you assess raw signals from camera and lidar systems in their operating environments.

Ansys 2020 R2 empowers Ansys SPEOS users to go further than ever before with enhancements that improve the handling of complex sensors, project preview and computation.

Enhancements include:

 •  Highly accurate camera models drastically improve camera simulation experience 

•  Faster simulation times when using light sources and provides nearly real-time review 

•  4X faster simulation setup thanks to optimized GUI

Join PADT’s Application Engineer Robert McCathren for a first hand look at the capabilities of optical simulation, followed by what’s available for SPEOS in the Ansys 2020 R2 update.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 074: Design & Digital Engineering Updates in Ansys 2020 R2

 

Published on: October 19th, 2020
With: Eric Miller & Robert McCathren
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Application Engineer Robert McCathren for a look at 3D product design and updates for Ansys Discovery AIM, Live, and SpaceClaim in 2020 R2.

If you would like to learn more about this update, you can view Robert’s webinar on the topic here:

https://www.brighttalk.com/webcast/15747/440598

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Design & Digital Engineering Updates in Ansys 2020 R2 – Webinar

The Ansys Discovery suite of tools allows engineers to improve their 3D design capabilities, by increasing productivity, improving product quality, and spurring innovation. Explore ideas, iterate and innovate with unprecedented speed early in your design process with Ansys 3D design software. You can check melodyeotvos for all the latest updates.

Delve deeper into design details, refine concepts and perform multiple physics simulations to better account for real-world behaviors. 

Join PADT’s Application Engineer Robert McCathren for a look at 3D product design and updates for Ansys Discovery AIM, Live, and SpaceClaim in 2020 R2.

In the Ansys 2020 R2, users can explore large design spaces and answer critical design questions early in the product design process without waiting days or weeks for traditional simulation results.

Additionally, these tools have been upgraded to support concept modeling and model prep for importing modified CAD geometry, auto-skinning topology optimization results from Ansys Mechanical for automated geometry reconstruction, and so much more.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things Ansys 073: LS-DYNA Updates in Ansys 2020 R2

 

Published on: October 5th, 2020
With: Eric Miller & Jim Peters
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Staff Technologist Jim Peters to discuss the capabilities of the explicit simulation tool LS-DYNA, and look into what’s new in the 2020 R2 version of the latest Ansys acquisition.

If you would like to learn more about this update, you can view Jim’s webinar on the topic here: https://www.brighttalk.com/webcast/15747/440598

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things Ansys 072: Building Digital Twins in Ansys 2020 R2

 

Published on: September 21st, 2020
With: Eric Miller, Matt Sutton & Josh Stout
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Analyst & Lead Software Developer Matt Sutton, and Systems Application & Support Engineer Josh Stout for a discussion on the advantages of using Ansys Twin Builder to create simulation-based virtual replicas of physical assets for testing, as well as what’s new and improved for this tool in the 2020 R2 release.

If you would like to learn more about this update, you can view Matt’s webinar on the topic here: https://www.brighttalk.com/webcast/15747/437059

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things Ansys 071: Structural Optimization & Additive Improvements in Ansys 2020 R2

 

Published on: September 8th, 2020
With: Eric Miller & Doug Oatis
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Lead Mechanical Engineer Doug Oatis for a discussion on what you can expect from the latest advancements in topology optimization and simulation for additive manufacturing, available in Ansys 2020 R2. This update spans a variety of areas, including optimizing setup, modifying STL files, parameter free morphing, and much more.

If you would like to learn more about this update, you can view Doug’s webinar on the topic here: https://www.brighttalk.com/webcast/15747/433058

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things Ansys 070: Optimizing Electronics Reliability with Ansys Sherlock

 

Published on: August 24th, 2020
With: Eric Miller & Josh Stout
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Application & Support Systems Engineer, Josh Stout for a discussion on the unique capabilities of Ansys Sherlock, and what’s new for the tool in 2020 R2.

If you would like to learn more about this update, you can view Josh’s webinar on the topic here: https://www.brighttalk.com/webcast/15747/428230

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things Ansys 069: Fluent Updates in Ansys 2020 R2

 

Published on: August 10th, 2020
With: Eric Miller & Sina Ghods
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Senior Application Engineer, Sina Ghods for a discussion on what’s new and their favorite features in the 2020 R2 update for Ansys Fluent.

Known for delivering the most accurate solutions in the industry without compromise, Ansys continues to provide cutting-edge advancements with each new release. In 2020 R2 users can learn about updates from pre-processing to new physics models and workflow improvements.

If you would like to learn more about this update, you can view Sina’s webinar on the topic here: https://www.brighttalk.com/webcast/15747/427082

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS