All Things Ansys 099: The Future of Ansys on the Cloud

 

Published on: October 18th, 2021
With: Eric Miller & Wim Slagter
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Director of Strategic Partnerships at Ansys Wim Slagter to discuss the latest advancements in the software’s HPC capabilities, and how users can make the most out of cloud computing.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Running Ansys Fluent on Ansys Cloud using a Journal File and a UDF

Cloud computing is becoming more and more popular with the recent changes in the work environment, and Ansys Cloud solution is no exception. While running a Fluent simulation on the Ansys Cloud is now a more familiar task among CFD users since its introduction around a year ago, there are still some cases that might be challenging and need more attention. One of these cases is performing a Fluent simulation using a UDF.

The first thing users might notice when launching an Ansys Cloud Fluent job through the ACT extension is that the UDF files won’t be uploaded, which is why they might see their cases are failing if they don’t pay extra attention. In order to avoid this issue, users must follow one of the options below.

The first and most commonly used method to launch a Fluent job with a UDF is via the CLI (Command Line Interface). With this method, the .c and all other files in the working directory will be uploaded to the Cloud. Then UDF will then be compiled on the Cloud.

Since the Cloud computers already have compilers installed, one doesn’t need to anything special. The local directory should have .c file, case file with UDF plugged-in, and a journal file. As a side note, Ansys Fluent 19.3 and higher supports expressions that can be used to define boundary conditions instead of UDF. Starting with Ansys Fluent 2020R2, the C compiler is built-in with the software. Please refer to the product documentation.

We highly recommend that the user should have the required compiler installed locally to compile, hook, and test the routine before submitting it to the cloud.

If you have not used CLI to submit a Fluent job to the clouds, please read the article below:

https://cloudforum.ansys.com/t/80njy9/how-to-running-fluent-on-cloud-using-a-journal-file-and-udf

In short, you have to open a command prompt (cmd.exe) and navigate to your working folder. This folder should contain all the Fluent input files needed for the run: journal file, case file, etc. Once you login using ansyscloudcli command, you are ready to submit your job on the cloud.

Below is a common example for the commands to run Fluent on the cloud:

ansyscloudcli runfluent -j fluent_via_journal --jou tjunction.jou –q Flexible_eastus_Standard_HC44rs_2020r2 -n 1 -m 36 -v 2020r2

Here is some description of these commands:

> AnsysCloudCLI runFluent -j <job name> [--jou <journal>] -q <queue>  [-n <num nodes>] [-m <max cores>] -v <solver version>
-j: job name
-q: name of the queue 
    (run: ansyscloudcli getQueues, to get a list of all queues. Queue name is case sensitive)
-i: name of the input file for the solver
--jou: journal to execute (if set, -i is not used)
-n: number of nodes
-m: (optional) max number of cores. Useful if you want to make a run with 4 cores on a computer with 16 cores
-v: target solver version

The second method is to compile the UDF locally and upload all files to a virtual desktop infrastructure (VDI) session. Then the compiled UDF can be used with Fluent through the VDI session. Note that the UDF can’t be compiled on a VDI session with versions 2020R2 and earlier.

Lastly, with 2021R1 Fluent has a built in Clang compiler which will allow you to compile a UDF in a VDI session. However, the Clang compiler still won’t allow you to submit a Fluent job with a UDF through the ACT.

Ansys Cloud VDI solution running on a local desktop via RDP

Bring Your Simulation Home with Ansys Cloud Solutions – Webinar

Engineering simulation has long been constrained by fixed computing resources available on a desktop or cluster. Today, however, cloud computing can deliver the on-demand, high performance computing (HPC) capacity required for faster high-fidelity results offering greater performance insight, all from the comfort of your home.

Ansys Cloud delivers the speed, power and compute capacity of cloud computing directly to your desktop — when and where you need it. You can run larger, more complex and more accurate simulations to gain more insight into your product — or you can evaluate more design variations to find the optimal design without long hardware/software procurement and deployment delays.

Join PADT’s Senior Application & Simulation Support Engineer Sina Ghods for a look at how Ansys is working to drive adoption by providing users a ready to use cloud service that provides:

  • Higher Fidelity Models
  • Faster Turnaround Time
  • Improved Productivity
  • Flexible Licensing
  • Multiple Supported Solvers
  • And Much More

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

High Frequency Electromagnetic Updates in ANSYS 2019 R2 – Webinar

HFSS (High Frequency Structure Simulator) employs versatile solvers and an intuitive GUI to provide unparalleled performance, as well as deep insight, into a wide variety of 3D electromagnetic (EM) problems. ANSYS HFSS is the premier EM tool for R&D and virtual design prototyping. It reduces design cycle time and boosts your product’s reliability and performance. 

The ANSYS HFSS simulation suite consists of a comprehensive set of solvers to address diverse electromagnetic problems, ranging in detail and scale from passive IC components to extremely large-scale EM analyses. Its reliable automatic adaptive mesh refinement allows users to focus on the design instead of spending time determining and creating the best mesh.

Join PADT’s Lead Electromagnetics Engineer Michael Griesi for a look at what new capabilities are available for HFSS users in ANSYS 2019 R2.

This presentation will include updates for the following topics:

  • Solve speed
  • Electronics Desktop
  • ANSYS Cloud
  • Post processing
  • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 031 – Experience the Power of Simulation on the Cloud

 

Published on: February 25th, 2019
With: Eric Miller, Sina Ghods, & Judd Kaiser
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Sina Ghods from the Simulation Support Team and Judd Kaiser of ANSYS Inc. for a discussion on the latest offering from ANSYS: ANSYS Cloud; a tool that allows you to take advantage of the speed and computing power of ANSYS simulation products, all without the need for expensive hardware. Listen as they discuss the various capabilities and applications for this new tool and share their excitement about what impact this will have on the world of engineering.

Want to learn more about what to expect in ANSYS Cloud? Check out PADT’s webinar covering everything you need to know about the tool’s latest update.

Watch here: https://bit.ly/2U7blzj

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS