Fluids Updates in Ansys 2021 R2 – Webinar

Ansys computational fluid dynamics (CFD) products are for engineers who need to make better, faster decisions. CFD simulation products have been validated and are highly regarded for their superior computing power and accurate results. Reduce your development time and efforts while improving performance and safety.

With Ansys 2021 R2 comes a variety of features for improved workflows and more advanced simulations. Experience up to 5X speed ups for high-speed flows to Mach 30 and above, with improved treatment of reaction sources in the density-based solver. Discover embedded best practices in the automated mesh adaption setup for combustion and multiphase applications, resulting in cell count reductions of up to 70%.

Join PADT’s Senior Application Engineer and fluids expert Sina Ghods for an overview of what’s new in this latest release, including enhancements made to: 

Fluent

Forte

EnSight

CFX & Turbo Tools

And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

What’s new in Flownex 2021 Update 1

Friday Flownex Tip #16:

The Flownex team has just released Flownex SE 8.12.8, also known as 2021- Update 1. This release added new components, additional flexibility, additional improvements to user-friendliness, and bug fixes. There is a lot to unpack, and the best way to know all the details is to dig into the Release Notes. If you don’t have time for that, below are the nine enhancements that PADT’s engineers feel are the most noteworthy.

Velocity Based PID controller in the Distributed Control System

The new velocity based PID controller calculates the change in output variables, rather than an output itself. This enables multiple controllers to control the same variable without causing spikes in the output.

Steady state operations are now part of DCS components

DCS components can propagate their inputs into the model before, during, or after a steady state solution has been computed. This allows the user to decide if the DCS component initializes the steady state solution, calculate values for each timestep during the solution, or after the steady state solution has been completed. Be default, before is used.

Component Selection now has a search feature

The same controls that are in Flownex’s “Find” dialog are now in the Component Selection dialog. Multiple filters and options are available to make it easy to select components in models.

Added humid air fluid functions to Material Scripts

Psychrometric fluid functions have been added to the Material Scripts to enable the calculation of mixture mass fractions for three input combinations:

  • Humidity Ratio
  • Pressure, dry bulb temperature, and relative humidity
  • Pressure, dry bulb temperature, and wet bulb temperature

A new option to select between Conduction Shape Factors and Effective Area for the composite conductivity element

This one is pretty straightforward. A drop down in the Composite Conductivity dialog, under “Geometry”, lets the user specify which method they want for calculation conduction.

The installation verification tool now support several instances of Flownex in parallel

Users can now make sure that their installation is running parallel instances correctly with this new option. By default, it will run half the number of available logical processors, or the user can change the number in the tools user interface.

The Reactor Builder script has been greatly enhanced

User input has been combined to make multiple changes to the script that builds reactors. The enhancements are very specific to nuclear reactors and not only allow for more accurate models, but also a smoother process. If you use this feature, make sure you check the release notes.

Changes have been made to the runtime neutronics script

Another area that should excite (is that a pun?) those who model nuclear reactors are the user-driven changes to the script that models neutron behavior in reactors. These are fairly significant and a must-read for anyone who uses this feature.

Ability to select all components in a flow circuit on the drawing canvas

Users can now right-mouse-button on a component in their model and select all the components that are in the same flow circuit. Not only are they selected, but any common properties are shown in the properties grid.

And, much more

There were also a few bug fixes, especially in the flow solver components, so if you were dealing with an issue check the release notes or contact PADT to see if your problem has been resolved.

These were the changes that we think most users would be interested in knowing about. Check out the release notes to see all of them and, as always, don’t hesitate to reach out if you have any questions or don’t see something you need.

All Things Ansys 091: Heat Transfer & Flow Updates in Ansys Fluent 2021 R1

 

Published on: June 29th, 2021
With: Eric Miller & Tom Chadwick
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Tom Chadwick, Senior CFD Engineer at PADT to discuss what’s new regarding heat transfer and flow in the latest Ansys release.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things Ansys 081: Meshing & UI updates in Ansys Fluent 2021 R1

 

Published on: February 8th, 2021
With: Eric Miller & Sina Ghods
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Simulation Support & Application Engineer and fluids expert Sina Ghods for a look at what’s new in this release.

For fluids simulation in this release, products can be designed faster than ever before, thanks to major physics and productivity enhancements that build upon the tool’s ​already powerful workflow and meshing capabilities.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things Ansys 080: 2020 Wrap-up & Predictions for Ansys in the New Year

 

Published on: January 25th, 2021
With: Eric Miller & PADT’s Ansys Support Team
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by the simulation support team to look back at the past year of Ansys technology and make some predictions regarding what may happen in the year to come.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Fighting COVID-19 with Ansys Simulation – Webinar

Simulation has been and continues to be a powerful tool for helping to drive innovation in the medical industry. Everything from medical devices, to hospital equipment, and even pharmaceutical and clinical practices can benefit from the introduction of simulation technology. This is true now more than ever, as the we all are facing such turbulent times.

During the COVID-19 pandemic, Ansys is striving to combat the spread of the coronavirus, by backing the ongoing initiatives of customers and partners working in the medical sphere. In order to support healthcare professionals, policy makers, and communities around the world in this endeavor, Ansys is sharing key insights gained from their own analyse, along with those of partners and other collaborators, regarding how to prevent future spread, and treat those already effected by the virus.

Join PADT’s Co-founder and Principal engineer Eric Miller, along with Marc Horner, Principal Healthcare Engineer at Ansys, for a discussion on what the company is doing to combat the virus, as well as a look at some models that effectively illustrate how the tools are being used.

Register Here

All Things Ansys 063: Fighting COVID-19 with Ansys Simulation

 

Published on: May 18th, 2020
With: Eric Miller, Thierry Marchal & Marc Horner
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by two leaders in the Ansys response to COVID-19 – Thierry Marchal, Global Industry Director for Healthcare, Consumer Products & Construction, and Marc Horner, Principal Healthcare Engineer – for a discussion on what the company is doing to combat the spread of the virus, as well as give our listeners a more complete understanding regarding the specific applications that Ansys tools are being used for during this global pandemic.

If you would like to learn more about Ansys and their response to COVID-19, check out the following link: https://bit.ly/36bs8rR

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 037 – Optimizing the Industrial Internet of Things with ANSYS Digital Twins

 

Published on: May 20th, 2019
With: Eric Miller & Matt Sutton
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Senior Analyst and Lead Software Developer, Matt Sutton for a discussion on the industrial internet of things, and how ANSYS Digital twins helps companies make confident predictions about future product performance, reduce the cost and risk of unplanned downtime, and improve future product development processes.

If you would like to learn more about this update and see the tools in action, check out PADT’s webinar covering ANSYS Twin Builder here: http://alturl.com/ccjjq

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 035 – The History of ANSYS: An Interview with Dr. John Swanson, author of the original program & founder of ANSYS Inc.

 

Published on: April 22nd, 2019
With: Eric Miller, Ted Harris, & Dr. John Swanson
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Ted Harris for a very special interview for users of ANSYS software, Dr. John Swanson. Dr. Swanson is known as the founder of “Swanson’s Analysis Systems” in 1970; the company that would later be known to the public as ANSYS Inc. He also wrote the original ANSYS program in his home, and since leaving the company has gone on the work in philanthropy and alternative energy.

A John Fritz Medal winner, and member of the National Academy of Engineering, John is considered an authority and pioneer in the application of Finite Element methods to engineering.

We are incredibly thankful that John was able to join us for this interview, and we hope you enjoy learning a little bit about the history of ANSYS from the founder himself.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 031 – Experience the Power of Simulation on the Cloud

 

Published on: February 25th, 2019
With: Eric Miller, Sina Ghods, & Judd Kaiser
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Sina Ghods from the Simulation Support Team and Judd Kaiser of ANSYS Inc. for a discussion on the latest offering from ANSYS: ANSYS Cloud; a tool that allows you to take advantage of the speed and computing power of ANSYS simulation products, all without the need for expensive hardware. Listen as they discuss the various capabilities and applications for this new tool and share their excitement about what impact this will have on the world of engineering.

Want to learn more about what to expect in ANSYS Cloud? Check out PADT’s webinar covering everything you need to know about the tool’s latest update.

Watch here: https://bit.ly/2U7blzj

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 030 – Updates Available in ANSYS Fluent 2019 R1

 

Published on: February 13th, 2019
With: Eric Miller, Tom Chadwick, & Sina Ghods
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by Sina Ghods, and Tom Chadwick from the Simulation Support Team for a discussion on their favorite updates available in the latest release of ANSYS Fluent so far, followed by an update on news and upcoming events pertaining to PADT and ANSYS Simulation.

Want to learn more about what to expect in ANSYS Fluent 2019 R1? Check out PADT’s webinar covering everything you need to know about the tool’s latest update.

Watch here: https://bit.ly/2SJBFC4

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 027 – 2018 Wrap-up – Our Favorite ANSYS Features From This Year

 

Published on: December 17th, 2018
With: Eric Miller, Tom Chadwick, Joe Woodward, & Ahmed Fayad
Description:  

 

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s Simulation Support Team, including Tom Chadwick, Joe Woodward, and Ahmed Fayad for a round-table discussion of their favorite ANSYS features released in 2018, along with news regarding the PADT and ANSYS worlds.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

All Things ANSYS 025 – Elevating Post Processing with ANSYS Ensight

 

Published on: November 19th, 2018
With: Eric Miller & Clinton Smith
Description:  

In this episode your host and Co-Founder of PADT, Eric Miller is joined by PADT’s CFD Team Lead Engineer and PhD, Clinton Smith to discuss what makes ANSYS Ensight so special, including the boost it gives to both post processing speed and visualization quality by implementing ANSYS Ensight. All that, followed by an update on news and events in the respective worlds of ANSYS and PADT.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS