Design, Simulate, Print: ANSYS Offerings in Additive Manufacturing – Webinar

Don’t miss this informative presentation – Secure your spot today!

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 019 – Using Simulation for consumer goods – An interview with MTD Products

 

Published on: August 27th, 2018
With: Eric Miller, Maryam Khorshidi, and Dominic Kedelty
Description: In this episode your host and Co-Founder of PADT, Eric Miller is joined by Maryam Khorshidi and Dominic Kedelty from MTD Products, for an interview regarding how they use ANSYS simulation to engineer consumer goods such as lawnmowers and leafblowers; followed by an update on news and events in the respective worlds of ANSYS and PADT.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

PADT & Nimbix FAQ

You asked, and we answered. Below find a list of answers to commonly asked questions regarding the capabilities of Nimbix and it’s applications for ANSYS simulation software.

If you have additional questions you can email us at info@padtinc.com, or view a recording of our recent webinar on the benefit of using Nimbix when it comes to running simulation on the cloud:

Nimbix FAQ

  • Does NIMBIX comply with NIST 800-171/800-53 requirements
    1. NIMBIX is currently working on NIST compliance as we speak and are hoping to complete this very soon
  • What is the maximum core count?
    1. Customers using NIMBIX has access to thousands of cores. There are customers using 500 cores, 1000 cores and even more.
  • Does Nimbix provide any details of solving performance or hardware performance after a solution?
    1. What’s great about Nimbix is that you have complete access to the typical ANSYS performance/hardware outputs that all the solvers provide. In addition NIMBIX provides access to time/cost for the machines themselves
  • Any try before you buy arrangement to try it out?
    1. Please contact us at info@padtinc.com if you have any questions or if you’d like to see Nimbix in more details
  • My companies QA program requires verification of software installation. Can Nimbix run the workbench/ANSYS test suite?
    1. Nimbix is able to run a variety of benchmarks to validate and verify ANSYS
  • Maybe just a general question…any idea which solvers use GPUs?
    1. The Mechanical solver utilizes GPU extensively. In addition one of the Fluent solvers and an HFSS solver can utilize a GPU
  • The cost is of course important…how can you get the startup cost easily?
    1. Nimbix shows list prices on the website for a variety of machines. In addition Nimbix does not charge any subscription fees, gives each user 500GB free and does not charge file upload/download fees.  Please email us for any further clarifications
  • Is the license fee the typical fee for a standalone/network license?
    1. In terms of licensing, a customer’s own licenses are always used to run ANSYS. Nimbix can either host some or all of your licenses on their license server. OR Nimbix can access your own license server through a tunnel VPN.
  • Can you provide more insight on the monetary cost of running a computational intensive simulation, like very high-velocity object impact using ANSYS/Autodyn on Nimbix (large run time, large file storage)?
    1. As always, costs will vary depending on the type of problem. Please email us at info@padtinc.com if you want exact details on costs
  • How is session cost calculated?
    1. Session costs are purely based on time that you hold a machine. Time is calculated to the second
  • Suppose I’m limited not on cores in the office, but on licenses. If all the Mechanicals/Solvers/PrepPosts are occupied by the rest of the team, can I still use your service?
    1. Licenses need to be provided by the customer, either through their own license server or by hosting partial licenses on Nimbix’s own license server
  • How is ANSYS licensing handled?
    1. In terms of licensing, a customer’s own licenses are always used to run ANSYS. Nimbix can either host some or all of your licenses on their license server. OR Nimbix can access your own license server through a tunnel VPN.
    2. How does a dedicated server works? Dedicated Servers are one of the most powerful form of  Knownhost VPS hosting service available,  provides better reliability, more power, great flexibility, you might want to check how ServerMania explains dedicated servers, for a business or organization the online presence matters the most. It is very important to have a proper server by which one can operate the business.
  • How does Nimbix proving compare to purchasing HPC units upfront for an internal system with 16 to 32 cores? I know usage profile would matter, but this could be easily charted?
    1. Usage would definitely dictate a comparison. If there any specific use cases you’d like to investigate please reach out to us at info@padtinc.com
  • ANSYS/Autodyn is available on the Nimbix HPC platform?
    1. Yes it is
  • Is there a minimum charge?
    1. There is no minimum charge.

All Things ANSYS 018 – Exploring the ANSYS Academic Program

 

Published on: August 13th, 2018
With: Eric Miller & Gilles Eggenspieler
Description: In this episode your host and Co-Founder of PADT, Eric Miller is joined by Gilles Eggenspieler, Worldwide Academic Program Sales Operations Director at ANSYS, Inc. for a deep dive into what the program is all about, including how to take advantage of its offerings, and some examples of members of the program who have seen significant success in their use of ANSYS simulation tools.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Elevate Your Post Processing & Visualization Quality with ANSYS EnSight – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Simulation in the Cloud – Challenges, Tools & Mindsets – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Investigating Signal Integrity: Finding Problems Before They Find You – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

All Things ANSYS 017 – Exploring the ANSYS HPC Benchmark Program & other ANSYS news

 

Published on: July 10th, 2018
With: Eric Miller & Wim Slagter
Description: In this episode your host and Co-Founder of PADT, Eric Miller is joined by Wim Slagter, Director of HPC & Cloud Alliances at ANSYS, Inc. for an interview and discussion of the ANSYS HPC Benchmark Program; it’s capabilities, benefits, and so much more.

If you have any questions, comments, or would like to suggest a topic for the next episode, shoot us an email at podcast@padtinc.com we would love to hear from you!

Listen:
Subscribe:

@ANSYS #ANSYS

Introducing Signal Integrity: What is it and how does it impact you? – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Updates and Enhancements in ANSYS Mechanical 19.1 – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

An Update on The All Things ANSYS Podcast – Episode 016

 

Published on: June 8th, 2018
With: Eric Miller
Description: The All Things ANSYS Podcast will be back in full swing in the near future, however we wanted to give you a quick heads up on where we’ve been, and how we plan on reformatting and presenting the show going forward. We love putting these together and sharing them with you all, so we will be regrouping and exploring some new options to ensure we can continue to share the high quality news, content, and discussion that you’ve come to expect from this show as we move forward.

For the time being, check out this update on the new release of ANSYS Mechanical 19.0 and 19.1, and stay tuned for more content, hopefully coming soon.

Listen:
Subscribe:

@ANSYS #ANSYS

How to Accelerate & Simplify your Antenna Impedance Matching Network Design – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Drop Test Simulation: Analyze Stress & Deformation without Breaking Your Device – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Exploring RAPID 2018 in Fort Worth, TX

Waking up at 3 A.M. isn’t something I like to do often. However, for this conference I was about to attend, it was worth the early rise! Caffeine is a must to get through a long day of walking around and being educated by all the different new and old manufacturers of 3D printers. If you have been around 3D printing, you know there are really two conferences that are above the rest; AMUG and RAPID. Here are some of the things that were announced that I believe are the most significant at RAPID.

Stratasys:

Stratasys didn’t disappoint this year in introducing a new carbon fiber 3D printer, material, and metal technology that will be coming in a year+. We are very familiar with the Nylon 12 Carbon Fiber reinforced material that Stratasys has. It is THE best Nylon 12 carbon fiber material on the market and there are a few factors as to why that is the case. One is that they are using longer strands of Carbon Fiber than the competitor along with 35% carbon fiber filled parts compared to 15%. Soluble support is huge for this material as well, along with 2 to 5 times faster printer speeds. Check out how One Wheel is using this printer to help with manufacturing their cool skateboard:

https://www.youtube.com/watch?v=tOojDgd7KVE

ANTERO 800 is the new material that Stratasys released recently. This material is being used in many amazing ways. Lockheed Martin/NASA/Stratasys/PADT collaborated in a very successful task to get flight approved hardware for one of the next missions to space. Below is the full story on this new and exciting ESD version of Antero 800 FDM material. Could your company also benefit from using this type of material? We would like to help!

http://www.3ders.org/articles/20180418-lockheed-martin-padt-stratasys-to-3d-print-over-100-parts-for-nasas-orion-capsule.html

Vero Magenta V and Vero Yellow V are the new Polyjet materials to help with getting more vibrant colors along with deeper red and brighter yellow. 500,000 color combinations can be achieved now with these 2 materials that have been improved upon. Absolutely beautiful parts can be made with a Stratasys J750 or J735.

Metal We have been asking (and have been asked) for metal for the longest time! When is Stratasys going to jump into the metal game? One of the main reasons why I went to RAPID this year was to see Stratasys Metal parts. They did not disappoint. As far as what density these metal parts are, the process for printing, and when a machine will be available, that is still the big unknown. One thing mentioned at the conference is that they are wanting to make metal 3D printing affordable to all with the ability to 3D print metal 80% cheaper than anything available right now. How this compares to what Desktop Metal, Mark Forged, HP, and others who proclaim to make metal parts cheaper than the Laser or Electron Beam options is yet to be known. Stratasys wants to be able to provide value to the metal market by focusing on areas that are lacking, which is Aluminum. Always good to have competition against the large companies of metal as it makes everyone get better at what they are doing. Read more about this machine and what Phil Reeves (VP of Strategic Consulting from Stratasys) has to say in an exclusive interview with TCT. Also below are a few pictures I took in the Stratasys booth of their metal parts that were on display.

www.tctmagazine.com/tct-events/3d-printing-at-rapid-tct/stratasys-metal-3d-printing/

 

 

 

 

 

 

Software was featured big time at RAPID because it unlocks the ability to 3D print amazing parts like this that was featured in the EOS booth. Lattice structures and topology optimized parts!

There were a lot of companies present at RAPID that highlighted where the industry is headed. Materials with vibrant color capabilities was one such area receiving a lot of attention. While competitors have introduced machines that are capable of printing in a wide variety of colors, they still fall short when compared to the Stratasys Polyjet offerings. Machines such as the J750 and J735 both offer a similar range of color compared to other companies on the market, but surpass them when it comes to material options, applications, and overall usability.

I enjoyed talking with all the major 3D printer manufactures at RAPID. One questions I would ask each of them is, what makes your system better than the competitors? I loved hearing the sales pitch about their machines and there was some great insight gained by asking this.At the end of the day, it all comes down to how you are wanting to use the 3D printer. At PADT we have many different 3D printers, and while we see and understand the appeal of the various different offerings on the market today, there is a reason why we continue to resell and support the brands we do. Let us know how we can help you out and any questions that you have with 3D printing.

Simulate Moving Parts Faster & Easier with Overset Mesh – Webinar

Don’t miss this informative presentation – Secure your spot today!
Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!