Mechanical Updates in Ansys 2021 R2 pt. 3: nCode, Linear Dynamics & Acoustics – Webinar

Ansys Mechanical delivers features to enable easier workflows, analysis, scripting and product integrations that offer more complex solver capabilities. 

With the Ansys suite of tools, engineers can perform finite element analyses (FEA), customize and automate solutions for structural mechanics challenges and analyze multiple physics scenarios. By implementing this software into a manufacturing workflow, users can save money and time while ensuring their product meets the innovative requirements they have setup.

Join PADT’s Senior mechanical engineer & lead trainer Joe Woodward to discover the new features that have been added to Ansys Mechanical in PADT’s final webinar covering the 2021 R2 Mechanical release.

Highlights include nCode design capabilities, linear dynamics, acoustics, and explicit dynamics among many others.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Mechanical Analysis Updates in Ansys 2021 R1 – Webinar

Ansys 2021 R1 delivers significant improvements in simulation technology together with nearly unlimited computing power to help engineers across all industries reimagine product design and achieve product development goals that were previously thought impossible. 

With updates made to Ansys mechanical, users can easily handle the complexity of a variety of design environments. Everything from mulitphysics analysis to dynamic simulation allows for the ability to create a product that meets performance goals and holds up over time. 

Join PADT’s Application Engineer Robert McCathren for a look at analytical advancements in Ansys Mechanical 2021 R1, including updates for: 

          ​​​​• Element Technology

          • NonLinear Adaptivity

          • Coupled Physics Analysis

          • Linear Dynamics

          • Contact

          • And much more

Register Here

Alternating Stresses in Ansys Mechanical – Part 2: von Mises Stress

Editor’s Note:
The following PowerPoint is from one of PADT’s inhouse experts on linear dynamics, Alex Grishin.

One of the most valuable results that can come from a harmonic response analysis is the predicted alternating stresses in the part. This feeds fatigue and other downstream calculations as well as predicting maximum possible values. Because of the math involved, calculating derived stresses, like Principal Stresses and von Mises Stress can be done in several ways. This post shows how Ansys Mechanical does it and offers an alternative that is considered more accurate for some cases for von Mises. Part 1 covers how to do the same for Principal Stresses.

Alternating_vonMises_Stress

Alex also made this zip file that contains updated macros, an example Mechanical database, and a spreadsheet:

Mechanical Updates in Ansys 2020 R2 – Webinar

From designers and occasional users looking for quick, easy and accurate results, to experts looking to model complex materials, large assemblies and nonlinear behavior, Ansys has you covered. The intuitive interface of Ansys Mechanical enables engineers of all levels to get answers fast and with confidence. Ansys structural analysis software is used across industries to help engineers optimize their product designs and reduce the costs of physical testing.

Ansys Mechanical is the flagship mechanical engineering software solution that uses finite element analysis (FEA) for structural analysis.It covers an enormous range of applications and comes complete with everything you need from geometry preparation to optimization and all the steps in between. With Mechanical Enterprise you can model advanced materials, complex environmental loadings and industry-specific requirements in areas such as offshore hydrodynamics and layered composite materials.

In this webinar, PADT’s Senior Mechanical Engineer & Lead Trainer, Joe Woodward will cover a few key components of this tool and what is newly available for them in Ansys 2020 R2. This includes updates for:

– Mechanical Core

– Mechanical Graphics/Post Processing

– Linear Dynamics

– SMART Fracture

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Alternating Stresses in Ansys Mechanical – Part 1: Principal Stresses

Editor’s Note:
The following PowerPoint is from one of PADT’s inhouse experts on linear dynamics, Alex Grishin.

One of the most valuable results that can come from a harmonic response analysis is the predicted alternating stresses in the part. This feeds fatigue and other downstream calculations as well as predicting maximum possible values. Because of the math involved, calculating derived stresses, like Principal Stresses can be done in several ways. This post shows how Ansys Mechanical does it and offers an alternative that is considered more accurate for some cases.

Part 2 on von Misses Stress can be found here.

ANSYS-PADT-Alternating-Principal-Stresses-1

Alex also created an example Ansys Workbench archive that goes with the PowerPoint.

Mechanical Updates in ANSYS 2020 R1 – Webinar

With ANSYS structural analysis software, users are able to solve more complex engineering problems, faster and more efficiently than ever before. Customization and automation of structural solutions is much easier to optimize thanks to new and innovative finite element analysis (FEA) tools available in this product suite.

Once again, ANSYS is able to cement their role as industry leaders when it comes to usability, productivity, and reliability; adding innovative functionality to an already groundbreaking product offering. ANSYS Mechanical continues to be used throughout the industry, and for good reason as it enables engineers to optimize their product design and reduce the costs of physical testing.

Join PADT’s Senior Mechanical Engineer & Lead Trainer Joe Woodward, for an in-depth look at what’s new in the latest version of ANSYS Mechanical, including updates regarding:

  • External Modeling
  • Graphics
  • Composites
  • Linear Dynamics
  • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Mechanical Updates in ANSYS 2019 R1 – Webinar

From designers and occasional users looking for quick, easy, and accurate results, to experts looking to model complex materials, large assemblies, and nonlinear behavior, ANSYS Mechanical enables engineers of all levels to get answers fast and with confidence. 

With applications for everything form strength analysis to topology optimization, it’s no wonder this comprehensive suite of tools continues to serve as the flagship mechanical engineering software solution.

Impressive performance just got even faster with ANSYS Mechanical’s ability to run models with large contact areas up to 2X faster.

Join PADT’s Simulation Support Manager, Ted Harris for a look at this update along with what other new capabilities are available for ANSYS Mechanical, in the latest version; 2019 R1.

This presentation will feature exploration into updates regarding:

  • Linear Dynamics
  • Rigid Body Dynamics
  • Explicit Dynamics
  • Topology Optimization
  • Composites
  • And Much More

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Updates and Enhancements in ANSYS Mechanical 19.2 – Webinar

Don’t miss this informative presentation – Secure your spot today!

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!