The next webinar of the ANSYS Breakthrough Energy Innovation Campaign is now available!

Turbocharge Rotating Machinery Efficiency with Simulation
 
Rotating machinery users demand increased efficiency, reliability and durability while expecting compliance with regulatory mandates to reduce emissions and noise. Simulation pinpoints solutions and guides trade-offs early in the design process before significant investments have been made. By reducing the need for expensive prototypes and test rigs, simulation delivers better performance at lower cost.
By watching this webinar you will:

● Understand the concept of a virtual prototype and how it reduces development costs while optimizing product performance.

● Identify seven essential features that must be included in a simulation in order to maximize the performance and efficiency.

● Learn how ZECO Hydropower used ANSYS simulation tools coupled with high performance computing to develop a new and optimal intake for a Kaplan turbine in half of the usual time. They were able to reduce civil engineering infrastructure costs to ensure they would be competitive in emerging markets.

● Walk through ZECO’s simulation process and results including CFD turbomachinery simulation, parallel computing, parametric modeling, and optimization tools.

Register here to watch – or Click Here for more information on Machine & Fuel Efficiency
This webinar is presented by Brad Hutchinson and Alessandro Arcidiacono.
Keep checking back to the Energy Innovation Homepage for more updates on upcoming segments, webinars, and other additional content.

ANSYS Startup Roadshow – November 18th, Phoenix AZ

Phoenix!

The Co-Owner of PADT, Inc. Eric Miller will be at The Gateway Center for Entrepreneurial Innovation (CEI) this Friday, November 18th, from 12-1pm to discuss how ANSYS software is helping new entrepreneurs drive success through simulation.

This is a free event, and while registration is not required it is preferred.

The presentation will include a discussion on:

  • What simulation is and how it can be applied to product development

  • How partnering with PADT and ANSYS can be crucial to the success of a startup
  • How using ANSYS software will help deliver ideas to market more rapidly and cost effectively. Thus saving money, time, and increasing the probability of success.

Click Here for directions and additional registration information.

Eric will also be presenting information on the ANSYS Startup Program, which provides entrepreneurs with access to various ANSYS multiphysics simulation products bundled and priced specifically for early stage startup companies.

Acceptance to this program is limited to companies who are not current ANSYS customers and meet a variety of qualifications.

Those who are eligible will also receive access to the ANSYS Customer Portal for marketing opportunities and customer support.

Visit Padtinc.com/ANSYS_Startup to see if you qualify for this program, or Click Here to register to attend the startup presentation on November 18th.

We look forward to seeing you there

The first webinar of the ANSYS Breakthrough Energy Innovation Campaign is now available

download-6

Register here to watch

Simulation of Planar Magnetic Components – Possible or Impossible?

Planar magnetic components consisting of a ferrite magnetic core and numerous conductor/insulation layers have been in use for many years. Historically, determining temperature dependent winding and core losses has only been possible using iterative testing of physical models due to the difficulty in determining 3-D frequency and thermal dependency. The only way to accomplish this now is to use frequency and thermally dependent material properties in a 2-way spatially coupled simulation.

Additionally, you can only construct a frequency dependent system model that accurately represents the real device after the steady-state temperature condition has been reached throughout the device.

Recent breakthrough developments in simulation technology and high-performance computing from ANSYS make it possible to design, simulate and optimize planar magnetic components without building physical models or compromising simulation fidelity.

This webinar demonstrates how you can use ANSYS software tools, featuring a customized interface complete with manufacturer libraries, to automatically set up and then solve a frequency dependent, 2-way coupled magnetic-thermal model.

Register here to watch

This webinar is presented by Mark Christini, the lead ElectromagneticsMark Christini Application Engineer at ANSYS.

He has been working in design, development, application and manufacturing of electrical devices and systems for the past 30 years. Mark has a strong interest in transformers of all kinds ranging, from small electronic transformers to large oil-filled EHV power transformers.

Keep checking back to the Energy Innovation Homepage for more updates on upcoming segments, webinars, and other additional content.

ANSYS Startup Roadshow Kickoff – CEI Phoenix

Click Here to Register

Click Here to Register

Can’t make it? Keep an eye out as we will be hosting events in other locations as the roadshow continues on!

In the meantime, click here for more information on the ANSYS Startup Program.

ANSYS Breakthrough Energy Innovation Campaign – Machine & Fuel Efficiency

Information regarding the next topic in the Breakthrough Energy Innovation Campaign has been released, covering machine and fuel efficiency, and how ANSYS simulation software can be used to help solve a variety of issues related to this topic, as well as optimize the performance of all system components as they work together.

Additional content regarding machine and fuel efficiency can be viewed and downloaded here.

This is the second topic of a campaign that covers five main topics:

  1. Advanced Electrification 
  2. Machine & Fuel Efficiency
  3. Effective Lightweighting
  4. Thermal Optimization
  5. Aerodynamic Design

Information on each topic will be released over the course of the next few months as the webinars take place.

Sign Up Now to receive updates regarding the campaign, including additional information on each subject, registration forms to each webinar and more.

We here at PADT can not wait to share this content with you, and we hope to hear from you soon.

Machine & Fuel Efficiency – Industry Application

As it progresses, we here at PADT would like to share some examples of companies working within the five topics that this campaign focuses on (Advanced Electrification, Machine & Fuel Efficiency, Effective Lightweighting, Thermal Optimization, and Aerodynamic Design) in order to give you a better idea as to how they can be applied within the industry.

Machine & Fuel Efficiency – Infiniti unveils its Twin-Turbo VC-T Engine at the PMS 2016

Infiniti Motor Company gave a tech briefing on a new remarkable engine at the Paris Motor Show 2016. The VC-T Engine is the world’s first production-ready compression ratio machine. It will be available from

All you need to know about Infiniti's Twin Turbo V6 Engine

Want to learn more? Click Here for more information on how ANSYS simulation software can benefit companies working in the field of Machine & Fuel Efficiency.

Join PADT in exploring the impact of breakthrough energy innovation as well as how ANSYS simulation solutions can be used to help combat the challenges that this area presents. Fill out the registration form to receive additional information on each topic, along with updates regarding the release of various webinars as the campaign progresses.

Digital Engineering: Fast-Forwarding Next-Generation Product Development

digital_engineering_logoNothing beats seeing a product we were part of hit the shelves, except seeing that product become a success.  The Globalstar Spot3 project was even better because we were able to apply the full range of PADT’s capabilities to contribute to this success: Product Development, Simulation, and 3D Printing.

In “Fast-Forwarding Next-Generation Product Development” PADT’s Mike Landis outlines how we applied leading edge technology and a proven process to quickly develop Globalstar’s next-generation design, not just for performance but also for manufactuing.  The article is a great overview of the service PADT has to offer and how we partner with customers to make their innovation work.

If you have a new generation of an existing product line, or a brand new product under development and want a better product to market faster, PADT is here to help with our design, simulation, 3D Printing, test, and manufacturing expertise.  Just give us a call at 1-800-293-PADT or email info@paditnc.com.

 

ANSYS Breakthrough Energy Innovation Campaign is live!

As the worldwide demand for energy continues to grow every year, energy systems simulation is becoming an indispensable tool for improving the way energy is produced and consumed. At the same time, concerns about climate change are leading to stricter emissions regulations and calls for sustainable design in all future energy systems. Clearly, breakthroughs in energy innovation are needed to meet these formidable challenges.

Join PADT in exploring the impact of breakthrough energy innovation as well as how ANSYS simulation solutions can be used to help combat the challenges that this area presents.

This campaign covers five main topics:

  1. Advanced Electrification
  2. Machine & Fuel Efficiency
  3. Effective Lightweighting
  4. Thermal Optimization
  5. Aerodynamic Design
Information on each topic will be released over the course of the next few months as the webinars take place.
The campaign will consist of a series of webinars explaining the applications of ANSYS simulations software with regards to each topic, along with additional downloadable content.

Sign Up Now to receive updates regarding the campaign, including additional information on each subject, registration forms to each webinar and more.

More information regarding the campaign in general can be found Here.

artwork-for-bei-campaign

Investigation Signal Integrity: How to find problems before they find you – Webinar

In the Age of IoT, electronics continue to get smaller, faster, more power efficient, and are integrated into everything around us. Increasingly, companies are incorporating simulation early in the product development process, when the cost of design changes are at their lowest, to meet the challenges presented by Signal Integrity. For this to be effective, simulation tools need to be easy-to-use, compatible with existing work flows, and accurate, all while delivering meaningful results quickly.

If you or your company are designing or using electronics that are:
Critical to revenue, performance, or safety
Getting smaller, faster, or more efficient
Communicating with Gbps data rates
Using several or new connectors
Using long cables or backplanes
Then you could be a victim of Signal Integrity failure!

Join us September 7th, 2016 at 1 pm Pacific Time for this free webinar to discover how ANSYS is delivering intuitive Signal Integrity analysis solutions that can easily import ECAD geometry to compute SYZ parameters, inter-trace coupling, or impedance variations. Learn how ANSYS can help identify Signal Integrity problems and optimize potential solutions faster and cheaper than prototyping multiple iterations.

This webinar will introduce:

  • What products ANSYS provides for Signal Integrity problems
  • How these products can integrate into existing design workflows
  • And how easy these products are to use, even for novice operators

Followed by a Q&A session!

Click Here to register for this event and be sure to add it to your calendar to receive reminders.

Can’t make it? We suggest you register regardless, as our webinars are recorded and sent out along with a PDF of the presentation to our contacts within 24 hours of the presentation finishing.

ANSYS AIM Webinar: Increase Simulation Realism with Multiphysics

Some product designs require a single physics solution, while others require multiple physics simulations. Electronics cooling, wind loading on a solar array and the thermal performance of a heat exchanger are just a few examples of applications that require multiphysics simulation. Setting up and running multiphysics simulations used to be a challenging task involving the transfer of data between multiple physics solvers. With AIM, multiphysics simulations are easy to perform. AIM provides a consistent workflow and intuitive simulation environment for fluids, structures and electromagnetics that lowers the barrier to entry for multiphysics simulations.

 

Join us for this webinar to discover how AIM makes it easier than ever to solve your multiphysics design challenges in a single, easy-to-use environment. Don’t settle for single physics approximation when multiphysics simulations yield more accurate results with AIM.

This webinar will be held on September 1st from 1:00 – 2:00 pm PT 
Click Here to register for this webinar
AIM Webinar Title Page3

ANSYS AIM Webinar: Democratize Simulation for Your Design Engineers

Innovative companies are using simulation early in the product development process to improve and optimize product designs. Companies deploying up-front simulation to their product design teams require simulation software that is easy-to-use, provides accurate simulation results and allows customization to enforce best practices. Such design engineering simulation software allows teams to develop and refine design ideas early in the design cycle when the cost of making design changes is still low.

Join us for this webinar to discover how AIM’s intuitive simulation workflow delivers high levels of automation and allows customization to automate engineering simulation best practice. Learn how AIM’s custom applications enable every engineer in your organization to benefit from simulation insights.
This webinar will be held on August 24th from 1:00 pm – 2:00 pm PT

 

Click Here to register for this webinar

AIM Webinar Title Page2

Introducing Signal Integrity: What is it and how does it impact you? – Webinar

Is your comapny designing or using electronics that are:
  • Critical to revenue, performance, or safety
  • Designed in-house or by 3rd parties
  • Using wireless technology (e.g. Wi-Fi, Bluetooth)
  • Connecting to the cloud or Internet of Things (IoT)
  • Collecting large sets of data
  • Getting smaller, faster, or more efficient
If so then you could potentially be a victim of signal integrity failure!
Join us August 17th, 2016 at 1 pm Pacific Time for a free webinar covering an introduction to Signal Integrity

This is a high-level introduction that will cover:
  • What Signal Integrity is
  • Some of the challenges related to it
  • How to identify those at risk of signal integrity related failure
  • What is being done in response
Followed by a Q&A session afterwards!

Click Here to register for this event and be sure to add it to your calendar to receive reminders.

 

Can’t make it? We suggest you register regardless, as our webinars are recorded and sent out along with a PDF of the presentation to our contacts within 24 hours of the presentation finishing.

ANSYS AIM Webinar: Simulation For Product Design Engineers

Product design engineers are increasingly under pressure to complete product designs faster so innovative products can reach the market sooner. Performing up-front simulation as part of the product development process can accelerate designing optimized products and reduce costly physical prototypes. To successfully implement simulation early in the product development process, simulation software must be easy-to-use and cover all the necessary physics that impact product designs.

Join us for this webinar to discover how AIM delivers unparalleled ease-of-use for simulation driven product development, and learn how design engineers can benefit from using simulation early in the product development process.

This webinar will be held on August 10th from 1:00 pm – 2:00 pm PT

Click Here to register for this webinar

AIM Webinar Title Page

Simulation Driven Product Development with Free Form Fabrication

am-topo-prezo-titleJoining Two of PADT’s Favorite Things: Simulation and 3D Printing

Recent advances in Additive Manufacturing (3D Printing) have removed barriers to manufacturing certain geometry because of constraints in traditional manufacturing methods. Although you can make almost any shape, how do you figure out what shape to make. Using ANSYS products you can apply topological optimization to come up with a free-form shape that best meets your needs, and that can be made with Additive Manufacturing.

A few months ago we presented some background information on how to drive the design of this type of part using ANSYS tools to a few of our customers.  It was a well received so we cleaned it up a bit (no guarantee there all the typos are gone) and recorded the presentation.  Here it is on YouTube

Let us know what you think and if you have any questions or comments, please contact us.

The Record Reporter: Simulation Solutions

record-reporter-logoPADT’s Ward Rand and Eric Miller were interviewed recently by Chris Gilfallan of  “The Record Reporter” about what PADT does and how it impacts the local product development and intellectual property community. It ended up being a great overview and is aimed at helping the Arizona legal profession understand a bit more about what we do.   If you have a subscription you can read the article here.