Simulation Best Practices for Gas Turbine Design & Development – Webinar

Designing gas turbines to meet performance and safety standards remains a challenging process, and simulation is an integral part of said process. Original equipment manufacturers (OEMs) demand robust, fast and accurate solutions to reach optimized designs the first time.

Ansys offers a best-in-class multiphysics simulation solution for all gas turbine modules from inlet to exhaust. The end-to-end solution helps engine manufacturers increase safety, performance and efficiency while reducing emissions, noise, weight and maintenance cost.

Join PADT’s Senior Application Engineer and turbine expert Daniel Chaparro for an in-depth look at challenges facing engineers working with gas turbines, Ansys capabilities that can provide solutions, and examples of expected outputs after implementation. 

Discussion topics will include:

  • Aerodynamic performance
  • Combustion, acoustics and aerothermal
  • Structural durability and reliability
  • Process Compression
  • And much more

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!

Combining Simulation with Additive Manufacturing to Optimize Product Design – Webinar

Advatech Pacific, a Phoenix-based aerospace and defense contractor founded in 1995, works to change the way engineering is conducted for the better by incorporating innovative technologies into its customer’s workflow. Based on the success of previous projects, Advatech is a strong proponent of using high-end simulation software such as Ansys to identify and evaluate the fine details of massive multi-body mechanical systems, whether through simple static analyses or tightly-coupled multiphysics computations.

Implementing additive manufacturing as an additional way to improve system design presented opportunities to cut back on tooling costs and reduce lead time for several candidate turbine-engine parts. Doing so would also alleviate the challenge of reproducing complex castings, a problem made increasingly difficult by the fact that many of the original casting providers are no longer in business.

Join PADT’s Lead Mechanical Engineer Doug Oatis, and Advatech Pacific’s Engineering Manager Matt Humrick for a discussion on Ansys tools with regards to additive manufacturing & topology optimization, and how Advatech Pacific was able to use them to drastically improve the efficiency of their design and manufacturing process.

Register Here

If this is your first time registering for one of our Bright Talk webinars, simply click the link and fill out the attached form. We promise that the information you provide will only be shared with those promoting the event (PADT).

You will only have to do this once! For all future webinars, you can simply click the link, add the reminder to your calendar and you’re good to go!