Other Brands
PRODUCTS
The Fortus FDC™ is a supplemental material delivery cabinet that pairs with the F900® FDM® printer. It accommodates two 250 cubic inch spools of material, adding substantial material capacity to the printer.
Additionally, the Fortus FDC provides material drying capability to ensure the filament is at an optimal dryness level before printing. This greatly reduces the risk of poor print quality due to moisture-related defects, and enhances yield by reducing scrap.
The Fortus FDC™ is a supplemental material delivery cabinet that pairs with the F900® FDM® printer. It accommodates two 250 cubic inch spools of material, adding substantial material capacity to the printer.
Additionally, the Fortus FDC provides material drying capability to ensure the filament is at an optimal dryness level before printing. This greatly reduces the risk of poor print quality due to moisture-related defects, and enhances yield by reducing scrap.
The Fortus FDC™ is a supplemental material delivery cabinet that pairs with the F900® FDM® printer. It accommodates two 250 cubic inch spools of material, adding substantial material capacity to the printer.
Additionally, the Fortus FDC provides material drying capability to ensure the filament is at an optimal dryness level before printing. This greatly reduces the risk of poor print quality due to moisture-related defects, and enhances yield by reducing scrap.
| Spool Material Volume | 200 ci (41000 cc) |
|---|---|
| Full Spool Weight (material dependent) | < 20 lbs (9 kg) |
| Power Requirements | 10 amp, 230 volt, 1 phase (50 Hz or 60 Hz) |
| Compressed Air Requirements | 80-120 psi and 7 cfm (non-lubricated, non-condensing) |
| Cabinet Footprint | 29 in. x 29 in. (74 cm x 74 cm) |
| Weight | 474lb (215 kg) |
| ULTEM 9085 (Black & natural) | ULTEM™ 9085 resin is an advanced polyetherimide (PEI) thermoplastic material. It is grouped within the high-performance classification of FDM polymers due to its excellent physical and mechanical properties. |
|---|---|
| FDM Nylon 12CF | FDM Nylon 12CF (carbon fiber) combines nylon 12 base polymer with chopped carbon fiber, 35% by weight. The result is an FDM material with the capability to produce parts that are very strong and stiff. Due to the unique directional orientation of the fibers, Nylon 12CF exhibits anisotropic properties that can be employed similar to a composite laminate. |
Main Office:
ASU Research Park
7755 S Research Dr
Suite 110
Tempe, AZ 85284
Colorado Office:
165 S Union Blvd
Suite 550
Lakewood, CO 80228
New Mexico Office:
Sandia Science & Technology Park
1451 Innovation Pkwy SE
Suite 402
Albuquerque, NM 87123
Home Officed Employees:
Carlsbad, CA
San Bernardino, CA
Boise, ID
Las Vegas, NV
Rochester, NY
Knoxville, TN
Greenville, SC
Austin, TX
Dallas, TX
Houston, TX
