{"id":25658,"date":"2011-03-09T15:25:00","date_gmt":"2011-03-09T15:25:00","guid":{"rendered":"https:\/\/www.padtinc.com\/2011\/03\/09\/making-pretty-plots-in-ansys-mechanical-and-mechanical-apdl\/"},"modified":"2022-10-06T08:46:23","modified_gmt":"2022-10-06T15:46:23","slug":"making-pretty-plots-in-ansys-mechanical-and-mechanical-apdl","status":"publish","type":"post","link":"https:\/\/www.padtinc.com\/2011\/03\/09\/making-pretty-plots-in-ansys-mechanical-and-mechanical-apdl\/","title":{"rendered":"Making Pretty Plots in ANSYS Mechanical and Mechanical APDL"},"content":{"rendered":"<p><strong>UPDATE:\u00a0 <\/strong><\/p>\n<p><strong>This content is still good for APDL plotting, but way out of date for Ansys Mechanical. If you want to learn more about getting high quality images out of Ansys Mechanical at Ansys 2020R2 and newer, including 3D Printing your results, take a look at, &#8220;<a href=\"https:\/\/www.padtinc.com\/tag\/ansys-mechanical-output-update\/\" target=\"_blank\" rel=\"noopener\">An Update on Outputting Results from Ansys Mechanical<\/a>.&#8221;\u00a0<\/strong><\/p>\n<hr \/>\n<p><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/image_43.png\"><img fetchpriority=\"high\" decoding=\"async\" style=\"background-image: none; margin: 0px 10px 0px 0px; padding-left: 0px; padding-right: 0px; display: inline; float: left; padding-top: 0px; border: 0px;\" title=\"image\" src=\"\/wp-content\/uploads\/oldblog\/image_thumb_44.png\" alt=\"image\" width=\"277\" height=\"208\" align=\"left\" border=\"0\" \/><\/a>I was looking for some new images for our web page and all of the plots I had were pretty much screen grabs.\u00a0 Not the high quality I was looking for.\u00a0 And putting a picture of Angelina behind a mode plot probably won\u2019t go over too well, or will go over too well and will distract everyone.\u00a0 So I brought up the original models and started playing around trying to get a better quality image, and did pretty well.\u00a0 And, needing an article for this week, I thought I\u2019d share what I found. If you don\u2019t use MAPDL, skip on down to the ANSYS Mechanical bit.<\/p>\n<h1>ANSYS Mechanical APDL<\/h1>\n<p>NOTE: This is old information! Please go to the new article: <a href=\"https:\/\/www.padtinc.com\/2021\/01\/06\/ansys-mechanical-outputting-results-1-high-resolution\/\">An update on outputting results in Ansys Mechanical: Making High-Resolution Images<\/a>.<\/p>\n<p>For my MAPDL plots I actually referred back to an old \u201cThe Focus\u201d <a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/2022\/03\/PADT_TheFocus_27-1.pdf\" target=\"_blank\" rel=\"noopener\">article<\/a> I did in 2002. Yes, 2002.\u00a0 You can go back to that article for the details but here are the important bits below:<\/p>\n<ul>\n<li>Invest in a good image editing tool. If you are ultra-cheap, use the open source GIMP.\u00a0 But Adobe Photoshop and Corel Paint Shop Pro are worth the investment.\u00a0 With Paint Shop Pro having the price\/performance advantage if you don\u2019t already have Photo Shop<\/li>\n<li>You don\u2019t want to do screen grabs.\u00a0 MAPDL has great plotting to file abilities and you want to use those.<\/li>\n<li>Use the \/show command to output high quality graphics and skip using the pixels on your screen. You have two great options:\n<ul>\n<li>Use \/SHOW,PNG to tell MAPDL to write to a PNG file when you issue plot commands\n<ul>\n<li>\u00a0 PNG is the best choice for smaller files and high resolution.\u00a0 JPG may be more common but you will find that the images can be fuzzy, especially around edges.\u00a0 Go PNG.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/image_44.png\"><img decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: block; float: none; margin-left: auto; margin-right: auto; padding-top: 0px; border-width: 0px;\" title=\"image\" src=\"\/wp-content\/uploads\/oldblog\/image_thumb_45.png\" alt=\"image\" width=\"590\" height=\"484\" border=\"0\" \/><\/a><\/p>\n<ul>\n<li>If you are really hard-core and you want an exact representation of you model that can be scaled, then do a \/show,PSCR,,,8.\u00a0 This makes an encapsulated postscript file.\n<ul>\n<li>If you don\u2019t know what that is, we advice you don\u2019t bother.<\/li>\n<li>But if you do, pop it into Illustrator, group it and now you have a vector graphic you can scale, trim, edit and really do cool things with.<\/li>\n<\/ul>\n<\/li>\n<li>Get to know how to use the \/ERASE, \/NOERASE button for making multiple plots on a page.\u00a0 You can use \/win with the standard view commands to show results from different modes, different load steps, or if you get real clever, even different models.\u00a0\u00a0 Here is an example for plotting 4 different mode shapes:<\/li>\n<\/ul>\n<table border=\"1\" width=\"652\" cellspacing=\"0\" cellpadding=\"5\">\n<tbody>\n<tr>\n<td valign=\"top\" width=\"400\"><span style=\"font-family: 'Courier New'; font-size: xx-small;\"><span style=\"font-family: 'Courier New'; font-size: xx-small;\"><br \/>\n! Plots first 4 modes<br \/>\n\/erase<br \/>\n\/win,1,ltop $\/win,2,rtop<br \/>\n\/win,3,lbot $\/win,4,rbot<br \/>\n\/view,all,1,1,1,1<br \/>\n\/vup,all,Z<br \/>\n\/angle,all,0<br \/>\n\/dist,all,1.3<br \/>\n\/focus,all,.2,.08,.05<br \/>\n\/win,2,off $\/win,3,off $\/win,4,off<br \/>\n\/plopt,info,0<br \/>\n\/annot,delete<br \/>\n\/TSPEC, 15,0.700,1,0,0<br \/>\n*dim,anx,,4<br \/>\n*dim,any,,4<br \/>\n*dim,frq,,4<br \/>\nanx(1) = -.98, .4, -.98, .4<br \/>\nany(1) = .01, .01, -.92,-.92<br \/>\n*do,i,1,4<br \/>\nset,1,I<br \/>\n*get,frq(i),mode,i,freq<br \/>\nplnsol,u,sum<br \/>\n\/win,i,off<br \/>\n\/win,i+1,on<br \/>\n\/noerase<br \/>\n*enddo<br \/>\n\/tlab,anx(1),any(1),Mode 1: %frq(1)% Hz\/t<br \/>\n\/tlab,anx(2),any(2),Mode 2: %frq(2)% Hz\/t<br \/>\n\/tlab,anx(3),any(3),Mode 3: %frq(3)% Hz\/t<br \/>\n\/tlab,anx(4),any(4),Mode 4: %frq(4)% Hz\/t<br \/>\n\/replot<br \/>\n\/erase<br \/>\n<\/span><\/span><span style=\"font-family: 'Courier New'; font-size: xx-small;\">anx=<br \/>\n<\/span><span style=\"font-family: 'Courier New'; font-size: xx-small;\">any=\u00a0<\/span><\/td>\n<td valign=\"top\"><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/image_45.png\"><img decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: block; margin-left: auto; margin-right: auto; padding-top: 0px; border: 0px;\" title=\"image\" src=\"\/wp-content\/uploads\/oldblog\/image_thumb_46.png\" alt=\"image\" width=\"286\" height=\"216\" border=\"0\" \/><\/a><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<ul>\n<li>Get rid of that black or blue-blue background by changing your screen to reverse video.\n<ul>\n<li>Through the GUI: PlotCtrls-&gt;Style-&gt;Colors-&gt;Reverse Video<\/li>\n<li>Or put the following in a macro:<br \/>\n<span style=\"font-family: 'Courier New'; font-size: xx-small;\">\/RGB,INDEX,100,100,100, 0<br \/>\n\/RGB,INDEX, 80, 80, 80,13<br \/>\n\/RGB,INDEX, 60, 60, 60,14<br \/>\n\/RGB,INDEX, 0, 0, 0,15<\/span><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/image_46.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"image\" src=\"\/wp-content\/uploads\/oldblog\/image_thumb_47.png\" alt=\"image\" width=\"644\" height=\"244\" border=\"0\" \/><\/a><\/p>\n<ul>\n<li>Use \/TYPE to turn on slower, but higher quality hidden line removal\n<ul>\n<li>Default is z-buffer, which is fast but not a accurate<\/li>\n<li>Precise is the best: \/TYPE,,4 for hidden<\/li>\n<\/ul>\n<\/li>\n<li>Get smoother curved surfaces by increasing the number of facets on your polygons with \/EFACET\n<ul>\n<li>\/GRAPH,POWER is needed for it to work (default)<\/li>\n<li>\/EFACET,4 puts 16 (4\/edge) faces on every element face.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/image_47.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"image\" src=\"\/wp-content\/uploads\/oldblog\/image_thumb_48.png\" alt=\"image\" width=\"644\" height=\"165\" border=\"0\" \/><\/a><\/p>\n<ul>\n<li>Getting lots of pixels is the most important.\u00a0 Just make a big file with lots of pixels by using \/GFILE, 2400.\n<ul>\n<li>This gives you a file that is 2400 pixels tall<\/li>\n<li>\u00a0 You can then scale it down when you want to use it and get nice clean images.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p>There is a lot more you can do, like annotation, backgrounds, changing fonts, etc\u2026 But this covers the basics that everyone should know.\u00a0 Take a look at the original article and help on the following command for more: \/PLOPT, \/EDGE, \/TRIAD, \/LIGHT, \/DEV,FONT, \/TEXTRE, \/GFORMAT, \/ANNOT.<\/p>\n<h1>ANSYS Mechanical<\/h1>\n<p><span style=\"color: #993300;\"><strong>NOTE: This is old information! Please go to the new article: <a style=\"color: #993300;\" href=\"https:\/\/www.padtinc.com\/2021\/01\/06\/ansys-mechanical-outputting-results-1-high-resolution\/\">An update on outputting results in Ansys Mechanical: Making High-Resolution Images<\/a>.<\/strong>\u00a0<\/span><\/p>\n<p>Now things get a little different. In that MAPDL is old, older than some of you reading this article, it has some wicked cool tools that were put in there from the days when many of us didn\u2019t even have a color monitor.\u00a0 Now the world is online and everything is about an 200pixel wide JPEG file to be uploaded onto Facebook, you don\u2019t have as many options to get high quality images out of the Workbench interface.\u00a0 But the good news is that the default image, is better than most of the high quality ones you have to work for to get out of MAPDL.<\/p>\n<h2>The Basics for ANSYS Mechanical<\/h2>\n<p>So, for a lot of cases, just doing a screen grab of your graphics window in ANSYS Mechanical is good enough. But if you want nicer plots, here are some suggestions:<\/p>\n<ul>\n<li>If you are on Windows Vista or 7, then you need to turn of Windows Aero.\u00a0 This is the transparent fancy-pants options for how windows are displayed. But the screen capture used in ANSYS Mechanical doesn\u2019t work if it is turned on.\u00a0 So if you are going to be doing Images or Animations, you need to turn it off.<\/li>\n<li>Beyond the basic screen grab you should become familiar with the options under the little \u201cNew Figure or Image\u201d Icon on the main icon bar<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/image_48.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"image\" src=\"\/wp-content\/uploads\/oldblog\/image_thumb_49.png\" alt=\"image\" width=\"644\" height=\"279\" border=\"0\" \/><\/a><\/p>\n<ul>\n<li>If you choose Figure or Image it adds a Figure or Image object under whatever object you have selected.\n<ul>\n<li>A figure is a 3D image that updates every time you click on it.\u00a0 It stores the view settings when it is made, but you can rotate and zoom at any time.\u00a0 It is a 3D picture<\/li>\n<li>An image is a screen capture that is stored in the tree.\u00a0 You can also import an image from your hard drive.<\/li>\n<\/ul>\n<\/li>\n<li>The easiest way to get a nice plot is to get what you want on the screen and use \u201cImage to File\u201d.\n<ul>\n<li>By default this will make a PNG file that is the resolution of the image on your screen.<\/li>\n<\/ul>\n<\/li>\n<li>For a higher quality image, make your graphics window bigger.\u00a0 Remember, all ANSYS is doing is grabbing your screen and saving it to a file.<\/li>\n<li>The default background is a bit annoying for plots, especially if you want just your model.\u00a0 To turn it off go back to your project page and use Tools-&gt;Options-&gt;Appearance and set Background Style to Solid and Background color to white.\n<ul>\n<li>If you want to go old school and have white text and black background, you can set that here as well.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/bg1.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"bg1\" src=\"\/wp-content\/uploads\/oldblog\/bg1_thumb.png\" alt=\"bg1\" width=\"202\" height=\"163\" border=\"0\" \/><\/a><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/bg2.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"bg2\" src=\"\/wp-content\/uploads\/oldblog\/bg2_thumb.png\" alt=\"bg2\" width=\"202\" height=\"163\" border=\"0\" \/><\/a><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/bg3.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"bg3\" src=\"\/wp-content\/uploads\/oldblog\/bg3_thumb.png\" alt=\"bg3\" width=\"202\" height=\"163\" border=\"0\" \/><\/a><\/p>\n<ul>\n<li>If you want to make an image that can float in your PowerPoint (no background, transparent) then I like to turn off all the decorations.\u00a0 Do this by making sure your background is solid (white is usually good enough) and then go to View in the menu and uncheck Ruler, Legend, and Triad.\n<ul>\n<li>Once in PowerPoint, use the \u201cSet Transparent Color\u201d feature to set the white bits to clear.<\/li>\n<li>\n<div align=\"center\">Or, use you fancy image editing software to remove the background. (and put a cheesy one in if you want, as shown here:)<br \/>\n<a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/image_49.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"image\" src=\"\/wp-content\/uploads\/oldblog\/image_thumb_50.png\" alt=\"image\" width=\"304\" height=\"260\" border=\"0\" \/><\/a><\/div>\n<\/li>\n<\/ul>\n<\/li>\n<li>Play with the options to get the image you want.\u00a0 The contour style, if you want your elements shown or not, etc\u2026<\/li>\n<li>Another thing to know is how to change the default format for saving the images.\u00a0 The default is PNG, which we recommend.\u00a0 But if you need JPEG or BMP you can change it in Mechanical under\u00a0 Tools&gt;Options&gt;Mechanical&gt;Miscellaneous&gt;Image&gt;Image Transfer Type.<\/li>\n<\/ul>\n<h2>Getting Better Resolution on a Single Plot in ANSYS Mechanical<\/h2>\n<p>The above will work for most plots, but what to do if the image you get from screen grabs is just not good enough?\u00a0 Maybe you are on a laptop and you can\u2019t get the resolution you need. I especially find this true when I want to view my mesh.\u00a0 This is the default I get with mesh on:<\/p>\n<p><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/sc1.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: block; float: none; margin-left: auto; margin-right: auto; padding-top: 0px; border-width: 0px;\" title=\"sc1\" src=\"\/wp-content\/uploads\/oldblog\/sc1_thumb.png\" alt=\"sc1\" width=\"600\" height=\"482\" border=\"0\" \/><\/a><\/p>\n<p>By using the Print Preview tab, I can get a very high resolution image:<\/p>\n<ul>\n<li>Get the view you want in the graphics window.<\/li>\n<li>Click on the Print Preview tab at the bottom of the graphics window<\/li>\n<li>You should see what you saw on the screen.\u00a0 Don\u2019t panic.<\/li>\n<li>On the Print Preview tool bar click on the little picture and choose High Resolution<\/li>\n<li>It should update with a very nice high-rez image.<\/li>\n<li>This is an HTML page, so you can right click on the image and copy it, or save it to disk.<\/li>\n<\/ul>\n<p><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/preview.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: block; float: none; margin-left: auto; margin-right: auto; padding-top: 0px; border-width: 0px;\" title=\"preview\" src=\"\/wp-content\/uploads\/oldblog\/preview_thumb.png\" alt=\"preview\" width=\"598\" height=\"482\" border=\"0\" \/><\/a><\/p>\n<h2>Getting Better Resolution on a Multiple Plots in ANSYS Mechanical<\/h2>\n<p>The above will work for a single image but can be a pain if you want a bunch.\u00a0 For that we recommend that you leverage the Report Writer capability, even if you don\u2019t want the report.\u00a0 The Report Writer makes an HTML report of everything in your Model tree.\u00a0 So if you put Figures in your tree, it will make those for you when you do a Report Preview, all in one nice little directory.\u00a0 Here is how to use it:<\/p>\n<ul>\n<li>For every plot you want, click on the object you want the plot of and then sue the \u201cNew Figure or Image\u201d drop down to insert figures for every view you want.\n<ul>\n<li>Don\u2019t use Images, remember those are just screen grabs and won\u2019t give you better resolution.<\/li>\n<\/ul>\n<\/li>\n<li>When you are done, click on the \u201cReport Preview\u201d tab under the Graphics Window.<\/li>\n<li>ANSYS Mechanical will go of and think for a while, then it will show you your HTML report.<\/li>\n<li>You can cut and paste from the report if you don\u2019t have a lot of images.<\/li>\n<li>If you do have a lot of images, you will want to click on the Publish button\n<ul>\n<li>This brings up a dialog.\u00a0 Don\u2019t use the default Single file format, change it to \u201cPage, Figures in Subfolder (*.html)\u201d and pick a directory<\/li>\n<li>they will be sitting in the Project_Files directory.<\/li>\n<\/ul>\n<\/li>\n<li>The default images are 600 pixels wide, which may be OK.\u00a0 But if not, then you need to go into Options and tell ANSYS to make bigger, better images.<\/li>\n<li>Go to Tools-&gt;Options-&gt;Mechanical-&gt;Report-&gt;Figure Dimensions\n<ul>\n<li>Set the Graphics Height and Width higher.\u00a0 I like 1800 x 1500.\u00a0 That is three time more than the default<\/li>\n<li>You can get even more resolution by changing the Graphics Resolution to 2:1 or 4:1.\u00a0 This makes the pictures 2 or 4 times larger.\u00a0 But that can take a while\u2026<\/li>\n<\/ul>\n<\/li>\n<li>Now go back and redo the Report Preview and you should see much larger images, and much higher quality.<\/li>\n<li>To save to a folder, publish them.<\/li>\n<li>Click on the images below to see them in their full resolution:<\/li>\n<\/ul>\n<p align=\"center\"><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/Figure0008.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"Figure0008\" src=\"\/wp-content\/uploads\/oldblog\/Figure0008_thumb.png\" alt=\"Figure0008\" width=\"578\" height=\"482\" border=\"0\" \/><\/a><br \/>\n<strong>Default 600px wide image<\/strong><\/p>\n<p align=\"center\"><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/Figure0008_1.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"Figure0008\" src=\"\/wp-content\/uploads\/oldblog\/Figure0008_thumb_1.png\" alt=\"Figure0008\" width=\"578\" height=\"482\" border=\"0\" \/><\/a><br \/>\n<strong>1800px wide image<\/strong><\/p>\n<p align=\"center\"><a href=\"https:\/\/www.padtinc.com\/wp-content\/uploads\/oldblog\/Figure0008_2.png\"><img loading=\"lazy\" decoding=\"async\" style=\"background-image: none; padding-left: 0px; padding-right: 0px; display: inline; padding-top: 0px; border-width: 0px;\" title=\"Figure0008\" src=\"\/wp-content\/uploads\/oldblog\/Figure0008_thumb_2.png\" alt=\"Figure0008\" width=\"578\" height=\"482\" border=\"0\" \/><\/a><br \/>\n<strong>3600px wide image<\/strong><\/p>\n<h1>Conclusion<\/h1>\n<p>And those are the high points.\u00a0 Like everything else, the help is your friend and has much more detailed information.\u00a0 And don\u2019t be afraid to just try stuff out.\u00a0 Explore the options and settings, make lots of images.\u00a0 That worst thing that can happen is that you will create some files you need to delete.<\/p>\n<p>We hope this will help you make pretty pictures for your next report so that project guy won\u2019t grill you on stuff he really doesn\u2019t understand\u2026<\/p>\n","protected":false},"excerpt":{"rendered":"<p>UPDATE:\u00a0 This content is still good for APDL plotting, but way out of date for Ansys Mechanical. If you want [&hellip;]<\/p>\n","protected":false},"author":33,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2323],"tags":[],"post-podcast":[],"_links":{"self":[{"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/posts\/25658"}],"collection":[{"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/users\/33"}],"replies":[{"embeddable":true,"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/comments?post=25658"}],"version-history":[{"count":0,"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/posts\/25658\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/media?parent=25658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/categories?post=25658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/tags?post=25658"},{"taxonomy":"post-podcast","embeddable":true,"href":"https:\/\/www.padtinc.com\/wp-json\/wp\/v2\/post-podcast?post=25658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}