{"id":33152,"date":"2021-01-06T15:20:00","date_gmt":"2021-01-06T15:20:00","guid":{"rendered":"https:\/\/www.padtinc.com\/2021\/01\/06\/ansys-mechanical-outputting-results-6-3d-printed-ansys-results\/"},"modified":"2022-03-29T18:50:33","modified_gmt":"2022-03-29T18:50:33","slug":"ansys-mechanical-outputting-results-6-3d-printed-ansys-results","status":"publish","type":"post","link":"https:\/\/www.padtinc.com\/2021\/01\/06\/ansys-mechanical-outputting-results-6-3d-printed-ansys-results\/","title":{"rendered":"6 – An update on outputting results in Ansys Mechanical: 3D Printing Results"},"content":{"rendered":"\n

This post is the final, of six, and we finally get to the topic that we get the most questions on: “How do I convert my Ansys Results to a 3D Printed Model.” This article will cover taking Ansys Mechanical FEA results, stress, vibration, and heat transfer, and make a cool 3D plot on Stratasys full-color printers. The process should work on other color printers, but we have only tested it with Stratasys. <\/em><\/p>\n\n\n\n

\n

An update on outputting results in Ansys Mechanical<\/strong>:<\/p>\n\n\n\n

\n
\n
  1. Making High Resolution Images<\/a><\/li>
  2. Taking it to the Next Level with Ansys EnSight<\/a><\/li>
  3. Making Videos<\/a><\/li><\/ol>\n<\/div>\n\n\n\n
    \n
    1. Animated GIFs<\/a><\/li>
    2. 3D Result Objects<\/a><\/li>
    3. 3D Printing Results<\/a><\/li><\/ol>\n<\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n

      3D Printing and Color<\/h2>\n\n\n\n

      Since the beginning of 3D Printing, we have been using a file format called STL<\/a>. The format only contains the external surface of an object represented as triangles, and it does not support color. But there is good news, a new format, 3MF, or 3D Manufacturing Format<\/a> was recently introduced to replace STL. It is one of several 3D formats that contain not only triangles on the surface of an object, but they support color information for each triangle. 3MF is for 3D Printing. PLY, OBJ, X3D, and others are for rendering and viewing. <\/p>\n\n\n\n

      But there is bad news. At this time (2020 R2), no Ansys products support 3MF. So we need to get our results into a format that Stratasys can read color data from, which is the latest version of OBJ. Because of this, we will use our favorite Ansys post-processor, EnSight, to create a PLY file, then an open-source 3rd Party tool, Meshlab, to make an OBJ.<\/p>\n\n\n\n

      Note 1: <\/strong>As soon as Ansys supports 3MF or OBJ or someone adds a 3MF\/OBJ ACT Extension, we will update this article. <\/p>\n\n\n\n

      Note 2:<\/strong> The steps below are actually covered in the post in Post 2 on how to use EnSight and Post 5 on how to make usable 3D result files. But I’ll repeat them here since you may have only come to learn how to make a 3D result file. <\/p>\n\n\n\n

      Step 1: Get what you want to print as PLY in Ansys EnSight<\/h2>\n\n\n\n

      Ansys Ensight is a powerful tool that does so much more than make 3D result files. But we will focus on this particular capability because we can use it to get our 3D Printed results. <\/p>\n\n\n\n

      In Post 2 of this series, I go over how to get a high-quality 2D image from EnSight. Review it if you want more details or if you run into problems following these steps. <\/p>\n\n\n\n

      Before we get going, one key thing you should know is that Ansys EnSight reads a ton of formats, and one of them is the result files from Ansys Mechanical APDL. So we will start with getting that file. <\/p>\n\n\n\n

      The program reads Ansys Mechanical APDL result files. These are created when you run Ansys Mechanical and are stored in your project directory under dp0\/SYS\/MECH and is called file.rst or file.rth. I like to copy the result file from that directory to a folder where I’m going to store my plots and also rename it so I know what it is. For our impeller model, I called it impeller-thin-modal-1.rst. <\/p>\n\n\n\n

      Once you have your rst file, go ahead and launch EnSight. <\/p>\n\n\n\n

      That brings up a blank session. To get started click File > Open<\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      This will bring up a dialog box for specifying a results file. If you click on the “File type:” dropdown, you will see the long list of supported files it can work with. Take a look while you are there and see if any other tools you use are listed. Of course, Ansys FLUENT and CFX are in there.<\/p>\n\n\n\n

      But the one we want is Ansys Results (*.rst *.rth *.rfl *.rmg). Chose that, then go to the directory where you put your Ansys result file. <\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      EnSight will read the file and put it in a Case. It will list the results as Part 0 under Case 1.<\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      The left part of the screen shows what you have to work with, and the right shows your model. The “Time” control, circled in green, is where you specify what time, substep, or mode you want. The “Parts” control lets you deal with parts, which we really won’t use. And the “Variables” control, circled in orange, is how you specify what result you want to view.<\/p>\n\n\n\n

      We want to plot deflection, which is a vector. Click on the + sign next to Vectors, and you get a list of what values you can show. The only supported result for model analysis is Displacment__Vibration_mode. Click on that. Then hold down the right mouse button and select “Color Part” > All.<\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      This tells the program to use that result to shade the part. You should now see your contour.<\/p>\n\n\n\n

      Our example is a modal result. If you use a structural result file, you will be able to plot the displacement vector, as well as many stress results, under “Scalars” <\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      By default, EnSight shows an undeformed object. If you want to see the deflected shape, click on the part then on the “Displacement” icon above the graphics window. Select the vector result you want to use, displacement in this case. Note, the default displacement factor may not be a good guess, change that till you get the amount of deflection you want. <\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      Note, the default displacement factor may not be a good guess, change that till you get the amount of deflection you want.<\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      The other thing you may want to change is the contours. It has a full library of colors you can change to, but I like the default. What I don’t like is that the min and max may not be where I want them, especially for modal deflection results. The min and max values are the min and max in the result file, and unless you normalize your results, you should tweak the values for your 3D print. <\/p>\n\n\n\n

      Here is the default color scheme for my 40th mode:<\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      To change the range, click on the contour key and Right-Mouse-Button on the legend, and select Edit… This brings up the Create\/edit annotation (legends) dialog. Then click “Edit Pallet…” at the top of that dialog to get to the Pallete editor. <\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      You can make lots of changes here, but what I recommend you do is only change the min and max values. If I set the max to 50, I get this contour on my result: <\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      Next, we want to save as PLY.<\/p>\n\n\n\n

      Go to File > Export > Geomtric Entities. <\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      In the dialog, chose PLY Polygonal File Format. This will be the generic format we can convert into something GrabCad likes. Make sure you specify which times or modes you want. By default, it will make a PLY for each one. Also, make sure you have selected the part. <\/p>\n\n\n\n

      \"\" <\/picture><\/figure><\/div>\n\n\n\n

      Now you have a color-coded, faceted representation of your results, in a 3D file format. Just not one that GrabCADPrint currently supports. <\/p>\n\n\n\n

      Step 2: Convert to OBJ in MeshLab<\/h2>\n\n\n\n

      Now we need MeshLab. There are many other tools that read PLY files and output to other formats, but MeshLab has not let me down yet. It is open source, does everything, and is a pain to use. You will laugh at the user interface. But as ugly as it is, it works. You can download MeshLab from www.meshlab.net<\/a>. Once you have it installed, follow these steps:<\/p>\n\n\n\n