Other Brands
PRODUCTS
Create 3D printed medical models with unrivaled accuracy, realism and functionality.
The J850 Digital Anatomy printer truly brings the look and feel of medical models to life with unrivaled accuracy, realism and functionality.
Whether used for surgeon training or to perform testing during device development, its models provide unmatched clinical versatility mimicking both the appearance and response of human tissue.
Bring medical models to life. The J850 Digital Anatomy Printer takes the J850 capabilities to the next level. Step up to the printer’s digital capabilities to create models with an incredible array of microstructures which not only look, but now feel and function like actual human tissue for true haptic feedback.
All of this in a single print operation with minimal to no finishing steps like painting, sanding or assembly.
The J850 Digital Anatomy printer truly brings the look and feel of medical models to life with unrivaled accuracy, realism and functionality.
Whether used for surgeon training or to perform testing during device development, its models provide unmatched clinical versatility mimicking both the appearance and response of human tissue.
Bring medical models to life. The J850 Digital Anatomy Printer takes the J850 capabilities to the next level. Step up to the printer’s digital capabilities to create models with an incredible array of microstructures which not only look, but now feel and function like actual human tissue for true haptic feedback.
All of this in a single print operation with minimal to no finishing steps like painting, sanding or assembly.
| Build Size | 490 x 390 x 200 mm (19.3 x 15.35 x 7.9 in.) |
|---|---|
| Layer Thickness | Horizontal build layers down to 14 microns (0.00055 in.) |
| System Size and Weight | 1400 x 1260 x 1100 mm (55.1 x 49.6 x 43.4 in.); 430 kg (948 lbs.) |
| Workstation Compatibility | Windows 7 and 8.1 |
| Network Connectivity | LAN – TCP/IP |
| Software | GrabCAD Print Digital Anatomy software Optional add-on GrabCAD Voxel Print and/or Digital Anatomy Creator software |
| Operating Conditions | Temperature 18 – 25 °C (64 – 77 °F); relative humidity 30 – 70% (non-condensing) |
| Power Requirements | 100 – 120 VAC, 50 – 60 Hz, 13.5 A, 1 phase 220 – 240 VAC, 50 – 60 Hz, 7 A, 1 phase |
| Regulatory Compliance | CE, FCC, EAC |
| Build Modes | High Quality (HQ) – 7 different materials / 14μm layers High Mix (HM) – 7 materials / 27μm High Speed (HS) – 3 materials / 27μm, x2 speed Super High Speed(SHS)- 1 material / 54 μm, x4 speed |
| Accuracy | Typical deviation from STL dimensions, for models printed with rigid materials, based on size: under 100 mm: ±100μ; above100 mm: ±200μ or ± 0.06% of part length, whichever is greater. Please refer to material-specific spec sheets for accuracy estimates. |
| Neutral: | Vero™ family of opaque materials including neutral shades and vibrant VeroVivid™ colors |
|---|---|
| Flexible material: | Agilus30™ TangoPlus™ TangoBlackPlus™ |
| Transparent: | VeroClear™ VeroUltraClear™ |
| Biocompatible: | TissueMatrix BoneMatrix GelMatrix RadioMatrix Biocompatible Clear |
| Support Materials: | SUP705™ (waterjet removable) SUP706B™ (soluble) GelMatrix (waterjet removable) |
| Digital model material: | Over 500,000 colors Digital ABS Plus and Digital ABS2 Plus™ in ivory and green Rubber-like materials in a variety of Shore A values Ultra-soft rubber-like material with a Shore 00 value Translucent color tints User-developed digital materials with GrabCAD Voxel Print™ |
Main Office:
ASU Research Park
7755 S Research Dr
Suite 110
Tempe, AZ 85284
Colorado Office:
165 S Union Blvd
Suite 550
Lakewood, CO 80228
New Mexico Office:
Sandia Science & Technology Park
1451 Innovation Pkwy SE
Suite 402
Albuquerque, NM 87123
Home Officed Employees:
Carlsbad, CA
San Bernardino, CA
Boise, ID
Las Vegas, NV
Rochester, NY
Greenville, SC
Austin, TX
Dallas, TX
Houston, TX
