PRODUCTS
Supplement your fixture and part fabrication with FDM composite 3D printing to gain speed, throughput, and cost benefits.
The F123CR (Composite Ready) Series consists of the F190™CR and the F370®CR, two composite printers that offer high-strength carbon fiber materials in a reliable, user-friendly industrial printer platform.
The high-strength composite printing that the F123CR series offers can be used to make work holding fixtures, soft jaws, and component parts in a fraction of the time compared to mental machining.
The F123CR (Composite Ready) Series consists of the F190™CR and the F370®CR, two composite printers that offer high-strength carbon fiber materials in a reliable, user-friendly industrial printer platform.
The high-strength composite printing that the F123CR series offers can be used to make work holding fixtures, soft jaws, and component parts in a fraction of the time compared to mental machining.
Build Size: | 12 x 10 x 12 in (305 x 254 x 305mm) |
---|---|
Layer Thickness: | 0.013 in, 0.010 in, 0.007 in, 0.005 in Note: Available layer thickness is material dependent |
System Size and Weight: | 1626 x 864 x 711 mm (64 x 34 x 28 in.) |
Network Connectivity: | Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector |
Software: | GrabCAD Print software |
Power Requirements: | 100-132V/15A or 200–240V/7A. 50/60 Hz |
Regulatory Compliance: | CE (low-voltage and EMC directive), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach, RCM |
Accuracy: | Parts are produced within an accuracy of +/- .200 mm (.008 in.), or +/- .002 mm/mm |
Standard Materials | ABS-M30 |
---|---|
Composite Materials | ABS-CF10 |
Support Material | QSR Soluble Support |
© 1995-2022 PADT, All Rights Reserved – Terms and conditions – Privacy Policy