Getting to Know PADT: High Performance Computing (HPC) IT Support Services

 This post is the twelfth installment in our review of all the different products and services PADT offers our customers. As we add more, they will be available here.  As always, if you have any questions don’t hesitate to reach out to info@padtinc.com or give us a call at 1-800-293-PADT.

The fact of the matter is, to be blunt, that building, maintaining, and optimizing systems for high-performance computing (HPC) is different than any other part of the IT world.  That is why most companies engaged in simulation who use HPC often struggle with their computers and networks. There is nothing wrong with their IT departments, they simply don’t have the manpower or the experience to support HPC systems. And that is why PADT offers IT support services tailored towards the needs of simulation users.  We bridge that gap between the unique needs of HPC for simulation and customer’s existing IT infrastructure.

We started offering this service simply because customers asked us to. As part of  ANSYS technical support duties, we kept getting calls from customers who were just not getting good performance out of some very expensive computer hardware. After looking into it we often found that they had the wrong hardware, it was configured wrong for HPC, or there was unnecessary overhead on the system.  In each case, we got together with the customer’s IT department and the users to understand the problem and implement fixes.

PADT’s IT team can offer a variety of services, including, but not limited to:

  • Implementing data management software
  • Performance benchmarking
  • Troubleshooting and Debugging Systems
  • High-performance Network design and installation
  • Making things run faster
  • System tuning
  • System design and configuration
  • Upgrading existing hardware
  • Installing software packages
  • Setting up queuing and monitoring tools

Focused on Performance

Most computer systems and the IT infrastructure that supports them, in the commercial world, are focused on security first, operating cost second, then performance.  And these are the right priorities. But in the HPC world, those same systems and infrastructure have to be focused on performance, with robustness second.  Security is important, but you solve that problem by isolating the systems and controlling access. PADT’s IT team gets this and because we run a large HPC infrastructure for our own simulation consulting business, they know how to set things up right and keep them tuned for performance.

A Partnership Between Users, IT, and PADT

Our deep knowledge of scientific computing and the hardware it runs on is only one part of our success in this area. The other is knowing how to be that translator between IT and the users of demanding numerical software packages.  We understand why IT can or can not open certain ports, and why the user needs those ports. We get the desire to establish a company-wide policy using remote drives that use RAID 1. We also know that doing that kills HPC performance. That starts the conversation on why users need local drives in RAID 0 for their number crunching.

The examples go on and on and involve memory, network fabric, different versions of MPI for each solver, and much more.  Often times just being able to explain these issues in terms everyone can understand is the greater value PADT can add.  And then our IT experts will be there with the customer’s IT experts at 11:30 PM installing those GPU cards and configuring them.

Maximize the Return on your HPC Investment

The cold hard reality is that companies spend large sums on advanced hardware, software, and infrastructure. Why not spend a little more to make sure you are getting the most from that sizeable investment.  PADT is here to help, to work with your IT and users, to get the most out of the tools you have.   Please don’t hesitate to call us at 480.813.4884 or send an email to info@padtinc.com to learn more.

Press Release: Dedicated 3D Scanning Added to Round Out PADT’s Scanning Solutions

3d-optical-scanner-1

PADT has been offering 3D Scanning solutions for some time. Over time the company has added the sale of 3D Scanning hardware and software, training for 3D Scaning, and limited 3D Scanning services.  With the addition of a full time scanning engineer, PADT is now able to offer deciated scanning servcies to our customers.

Ademola Falada joins our team from Minnesota where he worked for a scanner manufacturer, CGI, for two years after graduating with an engineering degree from the University of Minnesota.  He brings extensive knowledge of scanning equipment and the scanning process.  Since joining PADT in the late summer, he has been providing limited services to our existing customers as he builds up our scanning capability and puts everything needed to provide a world class service in place.  He will be assisted by engineers and technicians that have been providing scanning on a part time basis in the past.

cross-sectional-scanning      

By offering optical and cross sectional scanning, PADT can provide a more accurate solution to a broader range of customers.  

Read the press release on this expanded service below

.Geomagic-Capture

You can also review our scanning services on our website

Or simply email us at rp@padtinc.com or call 480.813.4884 and our team will be more than happy to explain what we can do and provide you with a quote. 

 geomagic-qualify-probe-screenshot 

Press Release:

Dedicated 3D Scanning Added to Round Out PADT’s Scanning Solutions 

PADT now has a full time engineer and equipment dedicated to providing 3D Scanning services to customers.  Coupled with the sales and support of 3D scanners and software, PADT can now offer a complete solution to its growing number of scanning customers. 

Tempe, AZ – January 8, 2015 – Phoenix Analysis & Design Technologies, Inc. (PADT, Inc.), the Southwest’s largest provider of simulation, product development, and rapid prototyping services and products, is pleased to announce the addition of complete 3D part scanning to our services offering.  Based on growing customer requests, PADT has invested in equipment, software, and personnel to provide a dedicated resource in this area.  The company has been providing scanning as a service for many years, but on a part time basis when staff was free and customers could not find another resource.  PADT’s 3D Printing sales team has also been selling scanners and scanning software for over three years.  Bringing someone on board to focus on this critical need in product development was the next logical step.



3D Scanning is used by engineers to take a part in the real world and measure it accurately in order to get a model of the part on a computer.  This is done using a variety of technologies including lasers, patterned light, and high resolution pictures. The technology is used in product development to capture geometry of existing parts to reproduce (reverse engineering) them or design parts that attach or interact with them. It can also be used to inspect manufactured parts.



Ademola Falada joins our team from Minnesota where he worked for a scanner manufacturer, CGI, for two years after graduating with an engineering degree from the University of Minnesota.  He brings extensive knowledge of scanning equipment and the scanning process.  Since joining PADT in the late summer, he has been providing limited services to our existing customers as he builds up our scanning capability and puts everything needed to provide a world class service in place.  He will be assisted by engineers and technicians that have been providing scanning on a part time basis in the past.



“We are now ready to open our doors wide to customers who need accurate, timely, and useful scanning of their parts.” Commented Rey Chu, one of PADT’s owners and the Principal responsible for the company’s manufacturing services. “We never felt that we could deliver the level of service that customers expect from PADT until we had enough equipment and a dedicated engineer. We are there now.”



The scanning lab consists of two CGI Cross Sectional Scanners for high fidelity scanning of complex plastic parts with internal features, a Geomagic Capture blue light scanner, and a Steinbichler high resolution blue light scanner currently under evaluation. This combination of equipment is matched with the full suite of Geomagic scanning software to provide inspection data, cleaned point clouds, tessellated solids (STL), or usable CAD models. 



Customers who are interested in having parts scanned, or who want to learn more about the service, can contact the team at 480.813.4884 or scanning@padtinc.com 



Phoenix Analysis and Design Technologies, Inc. (PADT) is an engineering service company that focuses on helping customers who develop physical products by providing Numerical Simulation, Product Development, and Rapid Prototyping products and services. PADT’s worldwide reputation for technical excellence and an experienced staff is based on its proven record of building long term win-win partnerships with vendors and customers. Since its establishment in 1994, companies have relied on PADT because “We Make Innovation Work.“  With over 75 employees, PADT services customers from its headquarters at the Arizona State University Research Park in Tempe, Arizona, its Littleton, Colorado office, Albuquerque, New Mexico office, and Murray, Utah office, as well as through staff members located around the country. More information on PADT can be found at www.PADTINC.com.